Year of construction: 2000, Condition: excellent (used), I sell the 4-axis milling head CNC working centre HOMAG Joker BAZ41 with beam table, year 2000. Configuration: 1x 4-axis main spindle 12kW S6 750-18.000 rpm water cooling ! Tool change chain system 12 Posizions HSK63 Drilling head 12 spindles in Z-direction Useful working area 3225x1660mm x Z 450mm. 2 working zones Automatic system for central lubrication WoodWop 4.5 software. CE and full documentation included. Fully working with all working heads and equipment. Djbusg Im Dkj E H Apscg Without Pump ! Available immediately.

Condition: good (used), Year of construction: 2001, For the commission-driven drilling and pressing of hinges as well as drilling Of handle and lock holes and indentations for special fittings and additional bores Up and down at doors. Workpiece dimensions: • Length: 300 mm 2500 mm • Width: 200 mm 800 mm Dsbu Eec Tu Rve H Apjcg • Thickness: 16 mm 30 mm • The workpiece width must not be greater than the workpiece length! Working height: 970 mm

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Debuevr A A Te E H Apscg Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: excellent (used), operating hours: 50 h, Functionality: fully functional, travel distance X-axis: 1,475 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 225 mm, rotational speed (max.): 24,000 rpm, CNC continuous feed center with clamp drive in X direction and fixed portal design in Y direction (without tools) HIGHLIGHTS Pressure cylinder: For holding the workpiece at zero reference Height-adjustable workpiece support: Along the Y axis Manual pressure device: For workpiece guidance Stop reference cylinder: For workpiece referencing in X direction Single pick-up space: Ergonomic tool change 4-way linear changer: For the shortest changeover times and space for milling tools/units TECHNICAL DETAILS Djbu E Hovrzrgs Apjcg Drive: Digital drives (driven on one side) Travel path X: 1,475 mm Travel path Y: 1,550 mm Travel path Z: 225 mm Working area X / Y / Z: 3,500 / 950 / 80 mm Milling spindle: 12 kW (S6) Tool holder: HSK F63 Maximum speed: 24,000 rpm Machine software package: Woodflash Sensor measurement: workpiece length in X direction Drill head Model: DH 25 8H 1S Number of spindles: - 17 vertical spindles - 8 horizontal spindles - 1 grooving saw in X direction MACHINE DETAILS Operating hours: 50 h EQUIPMENT - CNC board - Tool database - Program editor - Control management for 2 workstations (1 machine workstation + 1 external workstation) - Wireless barcode readers - Second stop cylinder for workpieces larger than X = 1,400 mm - Extractable air cushion run-out table - Automatic central lubrication

Condition: repair required (used), Year of construction: 2012, Functionality: fully functional, spindle speed (max.): 24,000 rpm, input voltage: 400 V, Machine in good condition, spindle to be repaired Dcobuovrtkho E H Apjg Machine price loaded on truck. Spindle repair possible on estimate Assembly possible on estimate

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software Working range in X axis mm 3600 Working field in Y axis mm 1800 N ° 2 work fields Nesting work plan Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, type Iso 30 cones Automatic tool change system with 16 positions - positioned on the rear of the machine Automatic tool change system with 8 positions - on board the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Dcobuevpihqe E H Apeg

Year of construction: 2006, Condition: excellent (used), I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2006. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included. Debuehlhige E H Apscg Repairs required: 1 safety carpet

Condition: good (used), Year of construction: 2006, Item description: WEINIG Conturex - machining center Product features: The WEINIG Conturex machining center is an innovative and powerful tool for the precise machining of wood and wood materials. It enables comprehensive profile machining in a synchronized through-feed process and is optimized for a wide variety of manufacturing processes. The combination of the latest control technology and robust construction makes the WEINIG Conturex the ideal solution for demanding production environments. Technical data: Dsbu E H Aevq Syljpecg • Intended use: High-precision profile machining of wood and wood materials. • Machining types: Sawing, milling, drilling, grinding in transverse and longitudinal directions. • Raw part dimensions: • Length: 180 - 1500 mm • Width: 25 - 260 mm • Height: 10 - 100 mm • Performance data: • Compressed air: 6 bar (minimum requirements) • Hydraulic pressure: 90 bar • Extraction capacity: Optimized dust and chip extraction for clean work. Equipment and functions: • Control: • NC-controlled system with integrated CAD/CAM for quick adaptation of machining programs. • Intuitive touchscreen interface for easy operation. • Work areas: • Two fully equipped machining stations for parallel work processes. • Fast tool changes thanks to automatic tool magazines. • Safety features: • Access locks and safety switches at all relevant points. • Automatic shutdown in the event of malfunctions. • Material guidance: • Precise clamping systems ensure exact positioning and secure hold of the workpieces. Advantages for the user: 1. Maximum efficiency: • Shortened production times through parallel processing and optimized throughput times. • Automated tool change minimizes downtime. 2. Flexibility: • Suitable for individual and series production with quick adaptation to different workpiece dimensions. • Customizable software options for customer-specific requirements. 3. Precision: • High-quality workmanship guarantees consistent quality in every application. • Accuracy to within fractions of a millimeter. 4. Durability: • Robust construction and durable materials ensure a long service life. Application possibilities: The WEINIG Conturex is ideal for applications such as: • Window and door production • Production of profile strips and frames • Furniture part production • General woodworking with high precision requirements Operating and maintenance instructions: • Operating conditions: • Only use in dry, clean indoor areas. • Ensure regular maintenance in accordance with the manufacturer's instructions. • Maintenance: • Automatic central lubrication for minimal manual maintenance effort. • Easily accessible maintenance points for quick and easy inspections. This machine combines cutting-edge technology and ease of use and is specially designed for companies looking for precision and efficiency in woodworking. With the WEINIG Conturex you get a machining center that is designed for the highest quality and maximum productivity. We will be happy to provide you with further technical details and customization options on request.

Condition: new, Year of construction: 2025, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive Debu Ejiz S Hao H Apocg SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: ready for operation (used), Year of construction: 2020, Functionality: limited functionality, CNC portal milling machine Equipment Steel construction: simple frame construction with reinforced portal frame Control cabinet and control in the machine bed integrated to reduce the installation area Work table material: plastic Functions: T-slot and vacuum Travel system X and Y axis: Rack and pinion drive Travel system Z axis: ball screw (TBI) Linear guides on X, Y and Z axis: PMI Travel motors: Servo (Delta) 750 W Spindle: Hiteco ATC QE-1F 6.6/12 24 130 NL CC Dobsvncraeu E H Apscg 24,000 rpm max. travel speed: 30 m/min max. working speed: 20 m/min Tool length sensor: yes Control: Eding 760 Electrical connection: 3 phases 400 V, 50 Hz Ambient temperature: 0° C -45 °C pneumatic tool changer 10-way Only sold to hobbyists or abroad

Condition: used, Workspace: 2,600 x 1,250mm X-axis: 2.700 mm Y axis: 1.600 mm Z-axis: 250 mm Spindle motor: 7,5 kW feed: Max. 38 m/min Dcobu Ejn A Dwgj H Apeg Video: On demand CNC machining center SCM Routech R 3000 for processing plate material with automatic loading (vacuum destacker) and outlet. Special price for self-dismantling and self-collection.

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, X-axis stroke - transverse - 3400mm Y-axis stroke - loading cart working range - 2200mm Z-axis stroke - vertical - 1000mm A axis range ( head spindle rotation) - +/- 115* C axis range (head spindle rotation) - +/- 240* Maximum movement speed in X and Y axes - 60 m/min Maximum speed of movement in the Z axis - 40 m/min Maximum motion speed in A and C axes - 50 deg/sec OSAI 10/510i Light digital numerical controller, CPU850 MHz, 510 Light 2GB HDD, 32MB RAM, 2MB Video Card, VGA connector, PS/2 connector, RS232 COM1 connector, RS232/422/485 connector, COM2 connector, EPP connector, ECP connector, Ethernet RJ45 Servomotors - 6 pcs. Inverter - 1 pc. Control panel with remote control - YES Spindle speed - 0 - 18,000 rpm Power of electro-spindle - 12 (S6) kW Tool clamping - ER32 x 6 pcs. Thermal protection of electro-spindle - YES Central lubrication system - YES Revolving tool magazine - YES (10) Additional stationary magazine - YES (3) Automatic lubrication oil level control - YES Dcjbu E Hovdt A Ue Apog CE declaration - Included Electric power supply - V/Hz 400/50 Rated power - 25kW Power cable cross section - 16mm2 Compressed air pressure - 6 bar Machine weight - 7000kg Control cabinet - 2000x1200x600mm Weight of control cabinet - 300kg Air conditioner of control cabinet - YES Dust protection of control cabinet - YES Software for visualization and simulation of the machine - VisioCNC PC computer, Monitor 17", Keyboard, mouse, 5-port switch, Windows. CE shield - YES

Year of construction: 2001, Condition: good (used), I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Dcebu E Hoi U Dxuj Apeg 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2009, ❗ WAREHOUSE CLEANING CAMPAIGN ❗ We are a Polish manufacturer and distributor of industrial drills created for the furniture industry, but not only. We specialize in through-feed drills, CNC drills, and drilling process automation. We also produce machines and drilling heads to order. Biesse Skipper 100 CNC machining center I am characterized by very high efficiency. Working length 90-3000mm Working width 70-1000mm Working height 8-60 mm Main electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 ℹ️ Price valid until stocks are exhausted Dcebu E H Aovmzh Dspeg

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Djbu E H Aeiz Avvspjcg Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, knife: WP flight circle (ø): 60 mm Dcsbu E H Aeuacknjpog Shank: 25 mm width: 80 mm material: steel Replacement blades: On demand

Condition: good (used), Year of construction: 2012, I sell the 5-axis CNC working centre Biesse Rover C6.40 with beam table, year 2012. Debueq Dkc Sj E H Apjcg Configuration: 5-axis main spindle HSD 15KW/S6 (12KW/S1) / Water cooled Tool magazine 22 positions HSK63 on moving head Drilling head 5+2+2 spindles Useful working area 3400x1570mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Automatic system for outfeed of waste material with band conveyor Additional vacuum outputs for raster works or connection of additional clamping devices. Pump Becker 250/300 m3/h. 5,5KW. Biesse Works software controller with full instructions. Total power 40kW Total weight 5100kg Good condition. Available immediately.

Condition: new, Year of construction: 2025, The CORMAK NST2131129A CNC milling machining centre is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which is perfect for production on an industrial scale. Constant quality control and components used in the construction of the machine guarantee high quality machining of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexi, dibond, carbon, alucobond. Machine description The CORMAK NST2131129A CNC milling centre for loading/unloading has been developed for companies that prioritise high capacity, economic efficiency and machine reliability. This automatic nesting centre offers tremendous possibilities, especially in its most popular version, equipped with an innovative storage and pusher unit for the smooth loading and unloading of full-field boards and the efficient collection of finished parts on a specially adapted table. The CORMAK CNC router is capable of cutting several boards simultaneously in a single cycle, ensuring continuous production even under heavy loads. Attributes of this advanced machine include ensuring precise and very fast material processing: Automatic loading and unloading system via specially designed suction cups and transferring it, together with automatic basing, to the horizontal drilling zone Intelligent quick tool selection from a 12-unit revolver magazine Powerful 2 drilling units and HQD and HSD spindles (industrial spindles with ceramic bearings) Pneumatic base pins, LCD control panel with control software included Large protective cover With retractable workpiece locating pins - 6 pieces Electronics by Siemens, Schneider and Phoenix Infeed and outfeed table In addition, the centre is equipped with an advanced nesting and toolpath optimisation algorithm for flexible production and efficient use of materials. A vacuum chip extraction system and a central lubrication system not only ensure cleanliness and operational safety, but also the long-term reliability of the machine. Overall, the CORMAK NST2131129A CNC milling machining centre is the ideal solution for companies looking for efficient, reliable and versatile material processing machines. Dsbuounw N Ao E H Apjcg Technical specifications Working area 2100x3100 mm Z axis 300 mm Construction: Arm - cast iron / table - welded steel Umbrella type tool magazine 12 pcs , ISO30 standard Tool length measuring sensor Automatic lubrication system for the XYZ axis INOVANCE servo drives ( 1.3kw for XY , 850w for Z-axis), with planetary gears Table - T-side / hybrid / infeed and outfeed Double layer, multi-hole vacuum work table in Bakelite with rubbers and screws for clamping, with positioning system Spindle power 9 kW Air-cooled HQD spindle (oil mist optional) Spindle speed 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Vacuum material clamping, hybrid Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Unloading and positioning of the machine on the customer's side. Power plug on customer side due to different 16A / 32A sockets

Condition: used, Year of construction: 2011, CNC machining center Homag type BMG 511/60/12/F/AP including extensive tools, with 5-axis spindle, two machining stations and reinforced vacuum pump. tool magazine: 30 speed, derailleur Dcsbsvdupieu E H Apeg projection laser: Yes software: WoodWop 6.1 Further data: On demand main spindle: 5-axle / 12 kW / Drive 5C+ X axis: max. 6,000 mm or 2 x 2,375 mm// 60 m/min Y-axis: max. 1,550 mm // 60 m/min Z-axis: max. 600 mm // 25 m/min

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit Dcebu Eer Atcyo H Apeg 4-head milling unit Automatic feeding system +-1mm Entry length 12m Suitable for wooden house constructions! Available immediately.

Condition: new, Year of construction: 2025, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. The price is a net price. Price does not include shipping costs. Dcobu E H Aeiz A Rqjpjg For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, CNC machining center Eima for machining wood. Special price for self-assembly. Dsbjr D T Nbsu E H Apecg Technical data: On request

Year of construction: 2004, Condition: good (used), I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW Dcobsh Txlcou E H Apsg XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Gate height in the Z axis up to 450 mm Dobu E H Aef Eyqqjpocg UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. Dcobueg Ngixj E H Apog The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.