BLOCK-HOUSE CNC working centre

Krüsi CM-40

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, Kljdjvfv Tfepfx Ah Njl without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm Kledpfx Ahjw Nbacj Nol

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI Chalet Building Machine / Log House Production Line Type CM 40 POS 1: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kw motor, length 6000mm POS 2: Longitudinal cutting saw diameter saw blade 400mm Pneumatic feed of the saw depth Main motor 4,0 kW POS 5: KKRÜSI RÜSI chalet building machine / log house finishing machine type CM 40 Machine-No.431 Year of manufacture 1996 Sawing unit: Manual feed spindle adjustment with analog dimension display CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display Drilling unit: Manual feed Spindle adjustment with analog dimension display Face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Klsdpfxehw N Npj Ah Nol POS 6: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kW feed motor length 12000mm 9 pcs. stop flaps, adjustable, pneumatically controllable 10 pieces sideshift for material transfer POS 7: assembly table 4.400mm x 12.000mm Manufacturer: Sweden Year of manufacture approx. 1985 Assembly table for further processing of the manufactured log house planks. 4 chain hoists for cross transport gear motor with 4,0 kW

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping Klsdpfju Uh T Dex Ah Njl - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Klodpfxed Exwge Ah Njl Working height max. 36mm Available immediately

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. Kledpsul Uizefx Ah Njl 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Kljdpfxsd Nmdkj Ah Njl Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Klsdpfxocqvhws Ah Njl Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Kedpjw N Nixsfx Ah Noll Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 Kljdou Nwd Djpfx Ah Njl *