Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Dcebusvmywqo E H Apsg Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: like new (used), Year of construction: 2011, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: AA1/016508, SCM 3-axis machining center, Tech Z1-26a, very little used was purchased as a demonstration machine and only used by us as a replacement machine. Is dismantled but can be demonstrated on request Dcobu Ejnfvqwj H Apog Reason for sale: dissolution of the joinery

Year of construction: 2023, Condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: - Machine conforming to CE regulations - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm Dsbu E Hoqw U D Rj Apjcg - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001

Condition: used, Year of construction: 2006, Functionality: fully functional, travel distance X-axis: 4,422 mm, travel distance Y-axis: 1,753 mm, travel distance Z-axis: 180 mm, controller manufacturer: SCM XILOG PLUS, controller model: num 1040, total height: 32,000 mm, total length: 80,000 mm, total width: 34,000 mm, spindle speed (max.): 20,000 rpm, number of spindles: 18, number of slots in tool magazine: 24, power: 11 kW (14.96 HP), Equipment: chip conveyor, documentation/manual, MorbidelliI Author X5 Evo 36- 5-axis machine! Type CNC machining centers Manufacturer MORBIDELLI ID no. 704 Year of manufacture: X-axis working range 4422 mm Y-axis working range 1753 mm Z-axis working range 180 mm Electro-spindle 1 pc. Main motor 11 kW C-axis rotary axis Tool magazine 24 positions Vertical drills 18 pcs. Horizontal drilling 6 pcs. Horizontal X-axis drills 4 pcs. Dobusibq Dde E H Apscg Horizontal Y-axis drills 2 pcs. Machine table beam Positioning Windows software Control SCM XILOG PLUS Speed max. 24,000 rpm HSK-F63 chucks Number of beams 10 pcs. Bumper safety device Connection power 32 kW Vacuum pump 250 m³/hour CE mark YES Weight 5000 kg 5-axis machine! Laser positioning Remote control The price does not include the cost of bringing the machine to the buyer's premises.

Condition: good (used), IMA LED set-up aid used in working condition. Debu E Hsbxx Iuj Apocg about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage

Condition: used, Year of construction: 2013, Functionality: fully functional, Manufacturer: MAXICAM CNC Technology., LTD Machine type: CNC cutting edge Year of manufacture: 2013 Made in: China Specification: 4 axis; Table size 6100x2400 mm; Working dimensions 5500x2200x180 mm; OSAI controller; Welded steel table and gantry for maximum straightness and rigidity; 9.5Kw Air Cooled HSD Spindle with dust extraction foot; 8 Position rotary style tool rack for Automatic Tool Change System to suit HSK 63F tool holders; Vacuum table with independent working zones; Becker Vacuum Pumps; Automatic tool length setting sensor Electronic Parts：German Schneider Electronic Spare Parts Switch gear: Japanese OMRON Switch Dcjbu E H Asvlnx Hspog German Igus highly flexible cables throughout the wiring loom high flow double layer phenolic vacuum matrix table (single layer standard) Machining speeds up to 25m/min Voltage: 3 PH, 380 V, 50 HZ Power: 21 KW Spindle power: 9 KW Dimension/m: 6.1 x 2.4 x 2.5 m Weight: 3100 KG Suitable materials: MDF, MDP, LMDP board, solid wood board, Plastic, Aluminium

Condition: good (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Dobu Ejvmpx Ro H Apjcg The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Year of construction: 2004, Condition: not inspected (used), Working range and axis strokes Nr.2 working tables 1.600 x 1.800 mm Total working range with joined tables 3.220 x 1.800 mm X axis stroke = 4.300 mm ; Y/W = 3.200 mm ; Z = 300 mm Workpiece passage Z = 300 mm Vacuum pumps Becker rotary type No. 2 x 250 m3/h Mechanical structure made of monolithic steel with fixed gantry with base, side beams and upper beam thermally welded in one piece and then thermally stabilized. The upper beam has a large section 400 x 400 mm. and is made with a geometry of combined sections with very high rigidity. Osai numerical control with DOUBLE TFT MONITOR OSAI 10/510 series DIGITAL INDUSTRIAL numerical control with integrated second computer: WINLINK with TeleService Industrial Personal Computer integrated in the OSAI control. Interactive operating panel TFT color monitor dedicated to the CN OSAI part TFT color monitor dedicated to the PC Windows part. Nr.02 Electrospindles: Pantographs HSD milling cutters with right and left rotation Max. speed 32.000 rpm ISO 30 Special very high speed toolholder P = 10,5 Kw = 14,5 HP at 18.000 rpm P = 10,5 Kw = 14,5 HP at 24.000 rpm P = 7,0 Kw = 9,5 HP at 32.000 rpm Debehvmwkou E H Apscg Front Ceramic Bearings Rear ceramic bearings Cooling by coolant Multi-position step-type suction hood from NC Electrospindle flanging device Digital electronic inverter Nr. 01 Setting axis (patented system) Composed by an additional

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, Functionality: fully functional, workpiece diameter (max.): 40 mm, overall weight: 2,100 kg, spindle speed (min.): 2 rpm, spindle speed (max.): 60 rpm, spindle diameter: 54 mm, positioning accuracy: 0.01 mm, roll diameter: 200 mm, thread length: 160 mm, working stroke: 25 mm, Equipment: documentation/manual, Incl. various tool sets Dcjbueu U Hb To E H Apog

Condition: used, Year of construction: 2006, SCM Reccord 142TUN Dcobu Esvk U Tue H Apjg - Year: 2006 - manufacturer: SCM - Model: Reccord 142TUN

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece height (max.): 40 mm, working width: 200 mm, working length: 3,200 mm, TECHNICAL DETAILS Machinable length: 200 - 3,200 mm Machinable width: 40 - 200 mm Workpiece height: max. 130 mm Depth with maximum mortise Ø 320 mm: 105 mm Tenoning carriage speed: 0 - 100 m/min Profiling speed: 3 - 15 m/min Tenoning 1st cross-cut saw: Power: 5.5 HP (4 kW) Saw Ø: 400 mm 2nd tenon cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available 3rd tenoning cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available Vertical positioning: With continuous axis 4th digital angle adjustment bracket: Available 5. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Debsvit E Hsu E H Apscg Tool Ø: 130 / 240 mm Axis stroke: 280 mm Double direction of rotation: Available Positioning: Vertical and horizontal with continuous axis Intervention (calibration): Time-delayed against vibrations 6. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Positioning: Vertical and horizontal with continuous axis 7. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Positioning: Vertical and horizontal with continuous axis 8th restoration group Positioning: Vertical and horizontal with continuous axis Device: For pulling out the lock 9. lower horizontal shaft (groove) Positioning: Vertical and horizontal with continuous axis Power: 88.5 HP (66.4 kW) 10. digital guidance: available 11. return of the parts: To the operator

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 18151, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Debu E H Ajvhcc Ejpjcg Under power until the end of August TECHNICAL DETAILS Travel X: 4,500 mm Y travel: 1,300 mm Z travel: 180 mm Number of vertical drilling spindles: 20 pieces Number of horizontal drilling spindles: 8 pieces Motor power: 1.7 kW Milling unit: 7.5 kW Horizontal milling unit: 3.7 kW Horizontal speed: 18,000 rpm Sawing unit 0°/90°: 3.7 kW Diameter: 180 mm Sawing unit 0°/90°: 3 kW Diameter: 160 mm Tool magazine: 10 slots Tool diameter: 160 mm MACHINE DETAILS Weight: 430 kg Installation dimensions: approx. 4 x 7 m (excluding control unit) Transport dimensions: 6,540 x 2,38 x 2,440 mm Operating voltage: 380 V AC, 50 Hz Power: 20 kW Vacuum pump output: 120 m³/h EQUIPMENT - 10 chucks

Condition: excellent (used), Year of construction: 2004, 4-axis machine with console table, 6 supports manually movable in X, 3 vacuum cups per console, vacuum pump 100m³/h Vacuum connection for templates LED display for suction cup position display Working range X: 200 - 3250 mm Working range Y: 70 - 1220 mm Working range Z: 12 - 100 mm (passage 150 mm) 12 vertical drilling spindles 6 horizontal drilling spindles, 4 of which in X direction and 2 in Y direction. Grooving saw in X-direction Dcjbjtv D Elsu E H Apeg Milling spindle 12 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling - WZW 8-fold front and 8-fold rear Tool changing aid at the front right POWERCONTROL PC 85T control unit with TFT 17″ WoodWop 5.0 incl. MDE and production list software Operating terminal Adapter units (included in the scope of delivery): -Lock box 2 spindles with blow-off nozzle Barcode scanner

Year of construction: 1998, Condition: good (used), Full composition Dcsbof Sqyvou E H Apsg

Condition: like new (used), operating hours: 30 h, ONLY 30 OPERATING HOURS Technical details: Operating range Standard: Dcjbuetvdrys E H Apeg X-axis (longitudinal): 3080mm Y-axis (lateral): 1540mm Z-axis (height): 200mm Optional: X-axis (longitudinal): 5080mm Y-axis (lateral): 2050mm Z-axis (height): 400mm speed: X-axis (longitudinal): 60m/min Y-axis (lateral): 30m/min Z-axis (height): 15m/min Spindle motor with tool change: Power: 11kW Cone: HSK63 max. speed: 24000rpm Dimensions and weight: Frame: 1570x4150mm Length: 4460mm width:3000mm Height:2400mm

Condition: new, Year of construction: 2024, Spindle speed: 4460min-¹ Min. workpiece dimension X: 300mm Dcsbu E H Ajl D Rw Nepsg Min. workpiece dimension Y: 90mm Min. workpiece dimension Z: 10mm Max. Travel speed X axis: 20m/min Max. tool diameter: 35mm Max. Workpiece dimension X: 3000mm Max. Workpiece dimension Y: 900mm Max. Workpiece dimension Z: 50mm Grooving saw speed: 5700min-¹ Dimensions: 3704mm x 1455mm x 2209mm (L x W x H) Nominal width of external suction nozzle: 120mm Power drive motor: 2,2kW Weight: 1200kg

Condition: excellent (used), Year of construction: 2010, • Panel Dimensions Dcebu Esup Augj H Apsg • Length: max. 1250 mm min. 20 mm • Width: max. 800 mm min. 50 mm • Thickness: max. 60 mm min. 10 mm • 4 clamping cylinders manually adjustable • Horizontal Drilling Aggregate with 1 Spindle • 1 Dowelling Tool (32mm from Drilling Spindle) • Glue injector with adjustable glue amount • Glue flow control • Standard Dowel Dimensions: 8x30 / 8X35mm • Vibrating hopper for automatic dowel feed

Condition: used, Year of construction: 1996, coolant ja Axis 3 Dcobjud Trwou E H Apog 9041 x-travel 800 mm y-travel 550 mm z-travel 500 mm

Condition: excellent (used), Year of construction: 2006, Homag BOF 311/60/PM CNC machining center for solid wood and furniture parts, construction elements such as windows/doors and stairs Processing 6000 x 1730/1600 x 300 mm (80 mm with standard vacuum suction cups); processing depth in y 1450/1525 mm at the front stops Console table with 11 consoles, 3 lifting rails and vacuum suction cups Quick-Move system: automatic console positioning in x-direction 11 pneumatic clamping elements, 3-stage for scantlings, clamping range 15-120 mm 11 clamping aids for rungs and narrow parts, can be lowered pneumatically 2 pcs. Vacuum pumps 66/100m³/h Control: power control PC85 with WoodWop 6.0 incl. WoodWop window/front door software (industry program) 17 inch TFT screen, Windows XP for processing: Main spindle 15 kW 1500 - 24,000 1/min with C-axis and extension for Flex 5 unit HSK 63 tool holder Tool changer: 30-position disk changer on the x-support, Drilling head 12 spindles: V12/H4 ; of which 6 drilling spindles in X-direction and 7 drilling spindles in Y-direction Adapter units included in the scope of delivery: Sawing unit 200 mm drm 4-spindle cross head (drilling, milling) 2-spindle lock case unit Chip conveyor belt DOCUMENTATION AND CONTROL TEXTS: GERMAN Dcobu Eeun Nwfj H Apjg

Year of construction: 1999, Condition: excellent (used), CNC machining centre with features as in the manual photograph. Bakelite plans excluded and optional separately. The machine is still in operation at our customer's premises. Arriving in our warehouses between the end of February and mid-March. Excellent condition, held by amateur. Djbu E Hjfd Tz Se Apscg

Condition: used, max. workpiece length 4400 mm profile spindle 1 Stück Djbu E Hjd Nv Dcs Apocg main drive 19,2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading ----- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the machine attached! At the side you will find the techn. Description of the machine as a PDF document. We would be happy to make your used machine one take reasonable price in payment! (technical information according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2024, Y axis drilling: 920 mm Dcobujl D Rw Ee E H Apog Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm Debustr D T As E H Apecg - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Year of construction: 2002, Condition: not inspected (used), C.N.C. MACHINING CENTER WITH 4 INTERPOLATING AXES - ELECTRONIC PANTOGRAPH BIESSE SPA ARROW ATS - NC 1000 YEAR 2002 EXCELLENT STATE OF USE AVAILABILITY AT OUR WAREHOUSES - ALWAYS AND ONLY EXCEPT SOLD DESCRIPTION : MACHINERY 4 INTERPOLATING AXES WORKING FIELD 3,012 x 1,549 x 270 MM PIECE PASSAGE AXIS TRAVEL X = 4,300 MM; Y/W = 1,600 MM; Z=300 MM MONOLITHIC STRUCTURE MADE OF HEAT-SEALED STEEL WITH THERMAL STABILIZATION X, Y and W AXES SPEED MAX 80 M/MIN; Z MAX 25 M/MIN AUTOMATIC LUBRICATION OF RECIRCULATING BALL BEARINGS AND NUTS CNC CONTROL NC 1000 WITH PC OFFICE WINDOWS AND COLOR MONITOR WORKTABLE NO. 08 BAR TYPE ATS TABLE WITH ELECTRONIC DISPLAYS AND 32 ATS TROLLEYS VARIOUS ATS VACUUM MODULES Dobspcirysu E H Apocg REAR, INTERMEDIATE AND SIDE REFERENCE STOPS LOW STOP CONTROL SENSORS NO. 01 250 M3/H VACUUM PUMP OPERATING HEAD WITH: - NR. 02 ELECTROSPINDLES P = 13.5 KW (18.4 HP); HSK 63F; V MAX 20,000 R.P.M. CERAMIC BEARINGS AXIS SETTING AND FLOTATION ELECTROSPINDLE (COPYING) EM2 4TH "C" AXIS WITH 0° - 360° ROTATION BY GEARS EM2 NR. 02 AUTOMATIC TOOL CHANGER WITH NR. 10 STATIONS EACH BH24L BORING HEAD WITH 18 VERTICAL, 06 HORIZONTAL SPINDLES AND FIXED BLADE UNIT IN Y SAFETIES CE STANDARDS WITH FRONT SENSITIVE MATS AND ANTI-INTRUSION NETS POWER SUPPLY 400 VOLTS THREE-PHASE, 50 HZ, I=90 A, P=49 KW MAX ELECTRICAL/ELECTRONIC CABINET EQUIPPED WITH AIR CONDITIONER DIMENSIONS 6,900 x 5,300 MM ABOUT WEIGHT 9,000 KG

Condition: new, • Working capacity 3300mm X, 200mmY, 180mm Z • 1 x vertical electro-spindle 7kw with saw • 1 x vertical electro- spindle 7kw 12 – 18000 rpm • 1 x electro-spindle kw1.7 with point to point vertical / horizontal drilling group • 1 x horizontal electro-spindle 5.6kw 12-18000 rpm • 4+4 work piece holding benches moveable on the X axis/ Each fitted with adjustable pneumatic workpiece clamps • L/H and R/H retractable work piece reference stops • Stand alone electrical control cabinet with hand held remote control for machine set up Dcsbsn Nv S Tou E H Apsg • Simple parametric programming with 3D working models • Perimeter safety cabin with front doors, vertical operation, synchronised with machine cycle