Briquetting press

2 x RUF 330 briquetter - complet line 330

Year of construction: 2012, condition: good (used), Complete dust drying line up to 6t/h including: - Drum Drayer Instalmec CT40 Bcedpfsvu Dq Rjx Aafou - Sawdust furnace 5MW with gas mixing chamber - Moving floor rawmaterial storage Rc9Tv - Disk screen for big particles - Intermediate bin 6m3 before drum - Rotating valve - Main Fan 160kW - Fuel storage and conveyor

Condition: excellent (used), Buderus SB 625 -185kw boiler Bcjdpfx Aaeu I Rx Sefeu

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Bjdjuqk Azjpfx Aafscu

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm Bedpfx Asvuuaioafecu dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Bcsdju D Amgopfx Aafju Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Bodpfx Aasu Dxb Tsfocu Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Bcjdsikvlispfx Aafou Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, Year of construction: 2015, functionality: fully functional, Description: Complete automatic weighing and bagging system for free-flowing granular or crystalline products such as fertilizers. The line consists of: Automatic Net Weigher NET/G Based on CBC weighing system Gravity infeed system Bedpfxjwqfadj Aafscu Stainless steel product-contact parts (AISI 316) Electronic microprocessor control with LED display Pneumatic flow regulation Dust extraction connection Designed for 25, 40, and 50 kg bags Automatic Bag-Forming Machine FFS-E 900 Forms and seals polyethylene (PE) bags from tubular reel Up to 900 bags/hour (product dependent) Dual sealing stations (bottom and top) Bag length control via encoder and photocell Vibrating device for product settling Siemens PLC control, operator terminal TP177B Stainless steel and anti-corrosion construction Complete with conveyors and safety guarding Suitable For: Granulated fertilizers, urea, crystalline chemicals, resins, salt, and other free-flowing materials. concetti, net/g, ffs-e 900, automatic bagging machine, bagging line, form fill seal, ffs bagger, polyethylene bagging, used bagging machine, net weigher, industrial packaging line, free-flowing materials, fertilizer packaging, granular materials, crystalline products, sack filling, open-mouth bagger, reel-fed bagging machine, palletizing line, PE bag machine, AISI 316, stainless steel bagging, Siemens PLC, automated bagging system, bag making machine, fertilizer line, urea bagging, bagging with sealing, industrial automation, CE marked, second-hand packaging machine, heavy-duty bagger, bulk material bagger, precision weighing, dosing system, bag closing system, automated filling system, eurodrive motors, modular bagging solution, bagging and sealing system

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Bcjdpfx Aeuy Ifgoafsu Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Bsdsw Dv Aiepfx Aafjcu Atex compliant Including DA576 feeder Magnetic separator and air gravity separator