Used belt grinding machines for sale (127)

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW Cedoxab R Iepfx Agrehd weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses Cjdpfsxabtcjx Agrshd - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Csdpfjxabhgex Agrohd Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor Chjdpfxjxaappj Agred - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW weight of the machine ca. 0,084 t Chjdpfxevcrnae Agred dimensions of the machine ca. 1x0,5x1 m New device

Condition: excellent (used), Belt sander Make Karnasch Cedpfouf N Scjx Agrshd Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: new, Year of construction: 2026, CORMAK MS2000 Pipe and Profile Belt Grinder is a modern metal belt grinding machine designed for precise and efficient grinding of steel pipes, closed profiles, and flat surfaces. The machine is ideal wherever high processing speed, excellent surface finish, and operator comfort are essential. Thanks to its robust construction, powerful motor, and dust extraction system, the CORMAK MS2000 metal belt grinder is ready for intensive industrial operation. Main advantages of the machine Prismatic clamping jaw system – ensures secure and stable fixing of pipes, profiles, and flat bars. Two-speed belt drive – allows adjustment of the grinding speed (15 or 30 m/s) depending on the material and the stage of processing. Stable machine base – minimizes vibrations, ensuring precision and comfortable operation. Large upper working surface – enables efficient removal of burrs and sharp edges from flat components. Easy access to wear components – quick belt and roller replacement minimizes downtime. Design and technology Csdpfx Aovxhv Segrshd The stationary CORMAK MS2000 belt grinder has been designed for intensive industrial use. The robust steel construction provides a rigid foundation for all working mechanisms, ensuring exceptional durability and machining accuracy. A 3.3 kW motor drives a 100 mm wide and 2000 mm long abrasive belt. The integrated dust extraction system, including two dust collection containers, enables clean and safe operation for the user. Precision and work efficiency Thanks to the adjustable grinding angle from 30° to 90°, the machine allows precise positioning of the workpiece relative to the belt, which is essential when grinding welds, joints, and edges. The standard grinding roller with a diameter of 42.4 mm provides versatile application possibilities – from precise processing of thin-walled pipes to grinding square profiles. Applications The CORMAK MS2000 belt grinder is suitable for: grinding steel, stainless steel, and acid-resistant steel pipes, grinding weld seams and edges of steel structures, finishing surfaces of closed profiles and flat bars, welding workshops, manufacturing plants, and metalworking facilities. Standard equipment Stable machine base Standard abrasive belt 100 × 2000 mm Grinding roller Ø42.4 mm Service tools Technical specifications Parameter Value Power supply 400 V Angle adjustment 30°–90° Belt speeds 15–30 m/s Motor power S6 3.3 kW Abrasive belt dimensions 100 × 2000 mm Machine dimensions 630 × 1430 × 1550 mm Weight 190 kg

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop Csdpfexaatuox Agrjhd - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander Cedpfxjxaanro Agrshd - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm Csdpfx Agoxaapisrshd MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, Year of construction: 2026, CORMAK BS150-200 Belt Grinder is an industrial machine designed for intensive operation in manufacturing plants, metalworking workshops, and tool rooms. This metal belt grinder combines high grinding efficiency with an effective dust extraction system, providing safety, cleanliness, and comfort during everyday use. Its robust steel construction and large work table ensure stability and precision even when processing large components. Main advantages of the machine Two belt speeds (15 / 30 m/s) – allows adjustment of the grinding speed to the type of material and the machining process (rough grinding or finishing). Integrated dust extraction system – provides a clean and safe working environment without the need for external extraction units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large work table (480 × 150 mm) – enables comfortable handling of larger workpieces. Stepless grinding angle adjustment – allows precise positioning of the belt according to the processed component. Quick belt replacement system – reduces downtime and improves work efficiency. Design and technology Csdpfx Ajvu Uqnsgrjhd The stationary CORMAK BS150-200 belt grinder is based on a welded steel frame, providing high rigidity and resistance to dynamic loads. The integrated dust extraction system, equipped with a 0.37 kW motor and two Ø100 mm extraction ports, ensures efficient removal of grinding dust and particles. The main 3.0 kW motor provides sufficient power for demanding machining operations and intensive industrial use. Precision and work efficiency Thanks to the use of a 150 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area, reducing processing time and increasing efficiency. Two operating speeds allow quick switching between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the entire working cycle, improving grinding stability and abrasive belt life. Applications The CORMAK BS150-200 metal belt grinder is used in: manufacturing plants processing steel, stainless steel, and aluminium, welding and metalworking workshops, surface preparation and finishing operations, grinding edges, weld seams, and flat surfaces. Standard equipment Stable steel base with tilt adjustment Abrasive belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection guard Adjustable protective shield Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 15 / 30 m/s Motor speed 1400 / 2800 rpm Main motor power 3.0 kW Dust extraction motor power 0.37 kW Machine dimensions (L × W × H) 1000 × 650 × 1150 mm Weight 117 kg Power supply 400 V Dust extraction ports diameter 2 × Ø100 mm Work table dimensions 480 × 150 mm Chip collection bag diameter Ø320 mm Chip collection bag length 650 mm

Condition: new, width of the strips 75.0 mm band length 2000 mm Chjdpfx Ajxaaq Togred band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min Chodpfx Agop H Tvxjred - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications Chsdpfxepag Tts Agrod belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: new, width of the strips 100 mm band length 915 mm dimensions of grinding wheel 200 mm Chedpfxeupxqwe Agrsd work table: 170x125 / 265x150 mm total power requirement 0,5 kW weight of the machine ca. 26 Kg dimensions of the machine ca. 0,6 x 0,5 x 0,3 m

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag Cjdpfxspag Tds Agrehd - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Item No. 17415 Technical data: Cedpfx Ajk D Dxfegrjhd - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical specifications: - Edge grinding machine for edge finishing on - welded boxes, cabinets, safes, etc. - SIEMENS control for indexing and oscillation - max. grinding height approx. 1200 mm Codeggbmaopfx Agrshd - grinding belt dimensions 100 x 2240 mm - grinding belt speed 12 + 24 m/s - grinding unit can be swiveled - 2 magnetic clamping plates - motorized grinding dust extraction - pneumatic connection 6 bar - power supply 400 V - space requirement approx. W 2500 x H 2000 x D 2000 mm - weight approx. 1500 kg

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: Chodok D Ewgspfx Agrsd - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Codjpugwispfx Agrshd The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec Codpfxopgmufo Agrshd power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, grinding belt width: 75 mm, grinding belt length: 2,000 mm, grinding belt speed: 30,000 mm/s, total height: 1,205 mm, total length: 956 mm, total width: 581 mm, overall weight: 110 kg, grinding width: 75 mm, warranty duration: 12 months, Universal belt grinder UTBS-75 Cedpfx Agox N Sv Asrjhd

Condition: new, Year of construction: 2026, The CORMAK SM150 belt grinder is an industrial metal belt sanding machine designed for intensive removal of excess material from large surfaces, edges, and weld seams. Equipped with a wide 150 mm abrasive belt and a two-speed belt drive system, the machine provides high working efficiency in metalworking shops, tool rooms, and maintenance departments. Its stable construction, powerful motor, and advanced ergonomics make it a reliable solution for precise and safe metal processing. Main advantages of the machine Wide abrasive belt 2000 × 150 mm – ideal for processing large workpieces and flat surfaces requiring uniform finishing. Two belt speeds: 15 / 30 m/s – allows adjustment of grinding speed according to the material and type of operation. Powerful 2.8 kW motor – maintains constant speed even under heavy pressure, ensuring high machining quality. Spring-loaded belt tensioning system – automatically maintains proper belt tension, eliminating the need for manual adjustment. Stable construction with a wide base – effectively reduces vibrations during operation, improving operator comfort and machining accuracy. Easy grinding angle adjustment – enables quick and convenient positioning of the belt in relation to the workpiece. Two dust extraction ports – provide efficient dust removal, improving workplace safety and cleanliness. Design and technology The CORMAK SM150 metal belt grinder has been built using reinforced high-rigidity steel components, ensuring stability and long-term reliability. The integrated dust extraction system and working area guards improve safety during operation. The adjustable grinding table and large belt contact surface (200 × 150 mm) allow convenient processing of workpieces with various shapes and dimensions. Precision and working efficiency Thanks to its wide abrasive belt and high-power drive system, the CORMAK SM150 stationary belt grinder enables fast and precise surface preparation for further production stages, including painting, galvanizing, or welding. The two-speed operating mode provides full control over both rough grinding and finishing processes. Applications The machine is ideally suited for: grinding edges, weld seams, and large flat surfaces, processing structural steel, stainless steel, and aluminum, industrial workshops, service facilities, and metalworking shops, serial and individual production, preparing surfaces for protective coatings. Standard equipment Abrasive belt 2000 × 150 mm Eye protection guard Adjustable grinding table Dust extraction ports (2 pcs.) Graphite coating reducing friction Chsdevu Uh Tepfx Agred Motor safety switch Belt tensioning roller Vibration-damping base Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Contact wheel surface (W × W) 200 × 150 mm Grinding area 150 × 575 mm Belt speed 15 / 30 m/s Motor power 2.8 kW / 400 V Machine dimensions (L × W × H) 1100 × 650 × 980 mm Weight 98 kg Warranty 12 months

Condition: new, Year of construction: 2026, The CORMAK PSM150 belt grinder is an advanced metal belt sanding machine designed for efficient and precise grinding of large flat surfaces as well as hard-to-reach welds close to the floor. Its construction has been optimized for ergonomics, stability, and ease of operation, making it an indispensable solution for professional industrial plants, metalworking workshops, and welding facilities. Main advantages of the machine High grinding efficiency – ideal for processing sheet metal, weld seams, and surfaces near the floor. Metal belt grinder with a large contact wheel 195 × 150 mm – provides a large contact area and stable operation. Adjustable depth stop – enables precise adjustment of grinding parameters to suit the workpiece. Large working surface 150 × 450 mm – effective finishing of large and flat components. Two belt speeds – 15 and 30 m/s – allows selection of the appropriate working speed depending on the application. Low machine weight (85 kg) – ensures mobility and easy transport within the facility. Design and technology The CORMAK PSM150 is a stationary belt grinder designed for sanding large and heavy components that cannot be processed on standard work tables due to their size. Its ergonomic design allows the operator to maneuver the machine directly over the workpiece. The drive roller and the 150 mm wide contact wheel enable efficient work on wide weld seams and surfaces. The adjustable working height range of 475–1240 mm allows the machine to be adapted to individual working conditions. Precision and working efficiency A 2.8 kW motor and a two-speed drive system ensure high grinding performance while maintaining precision. The CORMAK PSM150 metal belt grinder is suitable for processing components made of carbon steel, stainless steel, and aluminum. The stable construction minimizes vibrations, while the belt guidance system ensures accurate tracking along the entire working length. Applications The PSM150 model is an ideal solution for: welding shops and steel construction plants, manufacturers of railings, handrails, and large sheet metal components, companies involved in renovation and grinding of metal surfaces, maintenance and repair departments, stainless steel and aluminum processing facilities. Standard equipment Chedpfxjvu Unms Agrjd Abrasive belt 2000 × 150 mm Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Adjustable depth stop Stable construction with working height adjustment system Optional equipment Spare abrasive belts with different grit sizes Technical specifications Parameter Value Motor power 2.8 kW Contact wheel 195 × 150 mm Drive roller 195 × 150 mm Flat grinding area 150 × 450 mm Belt dimensions 2000 × 150 mm Belt speed 15 / 30 m/s Working height 475–1240 mm Weight 85 kg Package dimensions 750 × 1100 × 800 mm Power supply 400 V

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties Csdpsxabtiefx Agrohd of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe