Used belt grinding machines for sale (131)

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg Godpfx Agsxab R Io Djuk range L-W-H 1300 x 800 x 1500 mm - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: used, Year of construction: 1991, Lot consists of: (1) belt grinding machine Gedpfx Aex E Tqysg Djuk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 650x1160x650 mm Gusdpfx Aovz Hv Aeg Dok Weight 125 kg Total power requirement 3 kw

Condition: excellent (used), Year of construction: 1990, Vertical Belt Sander TMUA Table size: Width 325 mm x Depth 210 mm Motor: 5,5 kW Guodpfx Aex Hdxwjg Dsk Band Length: 1800 mm Band width: 125 mm Voltage: 380 V Year of construction: 1990 - Machine in very good condition Width: 900 mm Depth: 900 mm Total height: 1600 mm Weight: approx 250 kg

Condition: used, Year of construction: 1998, Belt sanding unit for machining the side surfaces of workpieces with a pneumatic belt tensioner. Technical specifications: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - With protective cover and 120 mm diameter connection for hose attachment to dust extraction system - Two-roller system for slack belt sanding. Roller diameter 75 mm, axle distance adjustable from 225 to 320 mm - Swiveling horizontal slide, travel 130 / 220 mm, operated via handwheel - Solid mounting bracket for sanding unit - Feed unit, pneumatically controlled, travel 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working stroke freely programmable by automation - Cable drag chain for cable duct, for electrical wiring and pneumatic hose Guedpfx Aexqqczog Dek - Clamping of workpieces via spring, unclamping via pneumatic cylinder

Condition: excellent (used), Year of construction: 2018, Used belt sander from Marpol Type 1075 Belt width: 75 mm Gujdpexzgmkofx Ag Dok Equipped with dust extraction Machine is in excellent condition

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor Guodpfx Agexabaio Djk - Low vibration

Condition: used, Year of construction: 2022, Lot consists of: Godpfxjx E Tico Ag Dsuk (1) Belt sander

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1160x550 mm Weight 85 kg Total power requirement 2,2 kw Gjdpfx Asvz Hv Neg Deuk

Condition: good (used), Selling long belt sander Johannsen type T88-K pneumatic. Table size 2900X1400mm Large table offset of 1100mm, making it possible to sand long parts that are longer than the table up to 1100mm wide Grinding shoe can be used with pneumatic support Very well-maintained machine from a workshop for the disabled You will receive an invoice with VAT shown. Gujdex A U R Hepfx Ag Dok Loading with a forklift possible Available immediately

Condition: new, Year of construction: 2025, NEW MACHINE Gusdpfxorwx Its Ag Dok please ask for daily updated price! We will make you an individual offer!

Condition: reconditioned (used), Year of construction: 2021, Belt Grinding Machine Manufacturer: REMA Model: BS 75 Column-type Design Year of Manufacture: 2021 – workshop-tested Description: - Flat grinding table usable both horizontally and vertically - Extremely robust and durable machine construction - High-quality components designed for continuous industrial operation - High safety standards with CE certification - Numerous customization options - Simple and quick belt change Technical data: - Belt dimension: 950 x 100 mm - Motor power: 0.55/0.7 kW - Motor speed: 1,450/2,900 rpm - Cutting speed: 8/16 m/s Gsdpfx Aexy Rfheg Djuk - Worktable size: 225 x 120 mm - Mitre table size: 110 x 120 mm - Belt guard housing made of steel - Extraction port Ø 75 mm - Dimensions: 380 x 410 x H 1,209 mm - Weight: 70 kg Used as seen, without warranty. The machine is technically in line with the standards of its year of manufacture.

Condition: new, The B 150 D Belt/Disk Sander from KNUTH is a robust and precise machine designed for efficient grinding in the Grinding Machines category. This heavy belt grinder features a large grinding surface with a durable sanding belt that runs over a wide contact roller, which measures 200x150 mm, ensuring excellent grinding results on flat surfaces, edges, and radii. Its powerful main drive allows for effective grinding, deburring, and chamfering tasks. The adjustable grinding support, complemented by an eye protection shield, prioritizes user safety and maximum accuracy during operation. Designed with user convenience in mind, the B 150 D allows for quick belt changes without the need for tools and includes integrated vacuum exhaust to maintain a clean work environment. This machine comes with a base, one sanding belt, a safety observation shield, and operator instructions. You can take your craftsmanship to the next level with the B 150 D Belt/Disk Sander; order online today! Godpfx Aep Auhujg Dsuk

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Gjdpfjhk Df Dex Ag Dsuk Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: like new (used), Unused belt sanding machine with extraction and filter Sanding belt dimensions: 2000 x 75 mm Gusdpexx Ayhefx Ag Dek Year of manufacture: 2018

Condition: good (used), For sale: SAMCO wide belt sanding machine Table dimensions: 2400x800 mm electric table height adjustment right/left rotation 2 speeds in each direction separate extraction fan Gjdpsx A Tv Usfx Ag Deuk

Condition: new, Year of construction: 2025, NEW MACHINE please ask for daily updated price! We will make you an individual offer! Gujdpfx Agorwx Hns Djk

Condition: new, Year of construction: 2025, A universal mobile belt grinder designed for grinding/polishing elements that may be impossible to transport due to their size or weight. Machine description Excellent device stability. Adjustable depth stop Easy and convenient operation Designed for grinding/polishing elements that are difficult to transport due to their dimensions Highly effective in grinding or polishing welds near the floor Guedpfx Agsvu Unms Djk Technical parameters Motor (kW) 2.8 Contact wheel (mm) 195x150 Steering roller (mm) 195x150 Flat grinding (mm) 150x450 Tape size (mm) 2000x150 Belt speed (mm) 15/30 m/s m/s Working height (mm) 475-1240 Weight (kg) 85 Packaging (cm) 750x1100x800

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 Godpfouf N Scox Ag Djuk with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: good (used), Year of construction: 2006, Belt sander 75 with pedestal Gedpfx Agjxyqi Te Dsuk

Condition: good (used), Complete belt grinding installation, consisting of: GRIT GX 75-2H (2-speed belt grinder) GRIT GXC feed unit (centerless tube grinder) GRIT GXW cooling/lubrication module (for wet grinding) Suitable for tube processing, cylindrical grinding, deburring, surface finishing, and material preparation of steel and stainless steel. How does it work? The material (tube or rod) is placed in the GXC feed unit, which automatically and evenly feeds the workpiece along the sanding belt of the GX 75-2H. For intensive applications, the GXW cooling module supplies coolant to reduce heat and achieve a superior surface finish. This system operates as a centerless tube grinder, ideal for processing long tubes and series production. Technical specifications GRIT GX 75-2H Belt Grinder 2 belt speeds: 15 m/s and 30 m/s Power: 1.5 / 2.0 kW Belt dimensions: 75 × 2000 mm Speed: 1500 / 3000 rpm GRIT GXC Feed Unit (Centerless Module) Feed speed: infinitely variable 0 – 2 m/min Workpiece diameter: Ø 10 – 100 mm Drive: 0.18 kW motor Gjdpfoxw Nq Dsx Ag Dsuk GRIT GXW Cooling Module Pump power: 0.06 kW Tank volume: approx. 20 liters Complete installation Total weight: approx. 160 kg Footprint: ± 120 × 60 × 120 cm Including 2 sanding belts (see photos)

Condition: new, width of the strips 150 mm Gujdeirwwpspfx Ag Dsk band length 2000 mm band speed 30 - 34 m/sec total power requirement 4 kW weight of the machine ca. 100 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m

Condition: new, Year of construction: 2025, NEW MACHINE Guedpjrwx Hysfx Ag Dok please ask for daily updated price! We will make you an individual offer!

Condition: new, Year of construction: 2025, NEW ON THE MARKET! Universal belt grinding machine with extensive standard equipment and the ability to work vertically and horizontally. quick & easy replacement of the sanding belt quick & easy adjustment of the grinding angle quick change of the head position in the vertical-horizontal area Smooth speed regulation with RPM indicator 550W brushless motor Shock absorber to dampen vibrations during operation, regulates the tension and adherence of the belt to the material Aluminum drive wheel Aluminum guide rollers with bearings Gusdpfx Agjvu Ukhe Dsk Belt covers in accordance with CE standards Steel supports allowing for precise pressing of the workpiece to the tape Technical data Power 230V Engine 0.55 kW Tape speed 12-34 m / s Tape dimension 50x1000 mm Weight 20 kg Dimensions 440x340x420 mm

Condition: new, Year of construction: 2025, NEW MACHINE Gedporwx H Ssfx Ag Djuk please ask for daily updated price! We will make you an individual offer!