Used vertical band saws - throat depth 420-799mm for sale (39)

Condition: new, In stock Projection: 610 mm installation height: 340 mm working height: 1015 mm table size: 600 x 500 mm table size additional table: 220 x 500 mm saw band length: 3970 mm cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min saw band width: 3 - 16 mm table inclinable, 4 directions: 15 Power main motor: 1,5 kW connected load band welder: 2,4 kVA weight, approx.: 700 kg Equipment: - Stepless cutting speed - Band welding device - Saw band in adjustable precision guides - All-round inclinable working table (not applicable for machines with table feed) Iedpeilk Nyefx Ah Nstb - Band shear - Grinding unit - Chip brush - Eyebolt for moving the machine - Machine light . LED speed indicator - Blow out device - CE

Condition: used, roll diameter 500 mm throat 490 mm workpiece height 220 mm table-size 600 x 600 mm saw band length 3350 mm turning speeds 12 - 1900 m/min total power requirement kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,2 x 0,8 x 1,95 m Itjdpfjqux Syjx Ah Neb Band saw with - swivel table - Footswitch - Machine light - IDEAL welding device

Condition: used, Year of construction: 1984, roll diameter 420 mm throat 400 mm workpiece height 255 mm Itjdpfsw Tdwxex Ah Nsb table-size 550 x 550 mm saw band length 3200 - 3400 mm turning speeds 20 - 150 m/min total power requirement 1,5 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 2,0 m Band saw with - swivel table - Machine light - IDEAL welding device

Condition: used, machine/vehicle number: 40220, throat: 750/430 mm Itjdsclmy Hepfx Ah Njb roller-Ø: 350 mm passage height: ca. 230 mm table size: 520 x 520 + 480 x 250 mm band speed: 50 - 300 feed/min engine: 380 V, ca. 1,5 kW space needed: 1730 x 880 x 1800 mm weight: ca. 500 kg

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW Ijdeb N Eh Hspfx Ah Njtb space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 26647, Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min Iedpfxect Nm Uo Ah Netb -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Condition: good (used), Year of construction: 1993, machine/vehicle number: 28794, Offer 24419 Iodsuk D I Ropfx Ah Notb Technical data: - Roller diameter 520 mm - projection 510 mm - max. passage height 420 mm - Table size 750 x 800 mm - Table swivels left + right 15 / 30 ° - Table height from floor 1020 mm - Saw blade length 4120 - 4200 mm - saw blade width 20 - 25 mm - infinitely variable cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welding unit in the machine stand - Grinding stone - Shears + air pump - lighting

Condition: good (used), Year of construction: 1981, machine/vehicle number: 12236-81, Offer 24157 Technical data: Itodpfx Astwbxnoh Nsb - Roller diameter 420 mm - projection 400 mm - max. passage height 325 mm - Table size 600 x 600 mm - Table can be tilted left / right 10° / 45° - Table height from floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Band width max. 25 mm - infinitely variable band speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - IDEAL saw blade welding unit - lighting

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm - Table size 630 x 530 mm - Table tilts 10/30° - Table height from floor 950 mm Itsdpfxowmnz No Ah Neb - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm

Condition: excellent (used), Year of construction: 2008, Vertical Bandsaw / KNUTH VB 510 - CE marking - Year of manufacture: 2008 - Band welding device Itsdpfx Aexcgf Ash Njb - Infinitely variable speed control - Table dimensions: 600x500 mm - Work light - Machine feet - Various accessories Dimensions: LxWxH 1.2x0.8x2 meters / Weight: 500 kg Subject to errors and input mistakes.

Condition: new, Vertical band saw machine Make: METALLKRAFT Model: VMBS 1610 Article no. 3951610 Condition: New machine Iedpfx Ajhy Tcqjh Nstb cutting speed 20 - 1000 m/min Accessories: - Belt welding machine with shear and grinding motor - machine light - 2-speed gearbox infinitely variable - chip blowing device - rip fence - instruction manual

Condition: used, Year of construction: 1977, roll diameter 420 mm throat 410 mm workpiece height ca. 210 mm table-size 600 x 600 mm table - tiltable 45 ° Itsdjwlvkispfx Ah Nob total power requirement 1,7 kW weight of the machine ca. 0,6 t - machine out of teaching shop - - with sawband welding and grinding device -

Year of construction: 1984, condition: good (used), Part on table ,marked with red ,not come. Itodpfx Ahslz Izle Nsb

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm table height 480 mm saw band length 3350 mm width of saw-band 10 mm total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Ijdowhqtdopfx Ah Notb Saw for body parts made of sheet metal, plastic etc good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Iodpfx Aowgi R Sjh Njtb Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW Itsdpovx Hugjfx Ah Nob - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, vertical band saw brand PEHEKA type SU 6.33 Throat depth: 615 mm max. Cutting height 250 mm cutting speed: min. 12 m / min of Max 3000 meters per minute, adjustable with blade welder make IDEAL blade length 4700-4800 mm blade width 8-25 mm 380 volts dimensions: L. 1400 T. 1100 x H. 2280 mm Itsdpfx Asdawl Hjh Nob

Condition: used, Year of construction: 1988, roll diameter 420 mm throat 410 mm workpiece height 295 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm saw band length 3150-3260 // 3-16 mm work height max. 1020 mm voltage 380 V total power requirement 1.1 / 1.7 kW weight of the machine ca. 620 kg Ijdpfx Ahoxaa Ave Netb dimensions of the machine ca. 1000 x 800 x 1900 mm from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base * Machinevideo : ?v=UVpE_bLGHa0

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device Itedpfxsxaazxj Ah Nob - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: used, machine/vehicle number: 17314, Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw Isdehx E Ucepfx Ah Notb -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw band length: 4,500 mm, saw band width: 20 mm, total height: 2,380 mm, total length: 1,250 mm, total width: 1,500 mm, overall weight: 900 kg, table width: 660 mm, table length: 660 mm, working height: 950 mm, workpiece weight (max.): 350 kg, throat depth: 610 mm, power: 3 kW (4.08 HP), Vertical Bandsawing-, Filing-, Grinding- and Polishing Machine, band speed 15-1600 m/min, motor 3 KW, band dimension 4500x20 mm, table size 660x660 mm, table high 950 mm, throat 610 mm, dimension 1250x1500x2350 mm, weight ca. 900 kgs Ijdpfx Asu Rghzjh Nstb

Condition: used, Year of construction: 1997, saw band length: 4,150 mm, - Vertical bandsaw with double-sided mitre capability - Hydraulic feed through the cut - Hydraulic material clamping - Minimum quantity lubrication system - Digital mitre angle display ELGO Ijdpjx Saurjfx Ah Notb - Including roller conveyor (partially driven) before and after the saw

Condition: excellent (used), functionality: fully functional, Special price: 9,990,-- net! --- Outreach 630 mm --- Cutting speed from 15 to 120 m/min --- Hydraulic table feed --- Table load capacity approx. 450 kg --- Hydraulic lifting rollers integrated in the table --- Table feed travel 400 mm. Table right of saw blade, W x D 500 x 975 mm Table left of saw blade, W x D 500 x 975 mm. Ijdex Nxtbspfx Ah Notb Designed for cutting high-quality material or for mounting clamping devices.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite Itedpsx Nxr Rsfx Ah Nsb . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 NR.27968 Stepless speed from 15-2350m/min 4 gears Band welder BSSO25 Air pump Work light Grinding stone Table swivels left15°-right45° Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Itjdpfxeviym Ds Ah Nob Weight approx. 700kg