Used bale presses for sale (216)

Year of construction: 2003, operating hours: 43,000 h, condition: repair required (used), machine/vehicle number: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Chedpskcgynefx Acyod Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, Year of construction: 2011, operating hours: 11,140 h, functionality: fully functional, machine/vehicle number: 407.00.115, total width: 2,000 mm, total height: 3,000 mm, total length: 7,100 mm, transport height: 3,000 mm, transport width: 2,000 mm, transport length: 5,300 mm, Strautmann baler in very good condition. Baler is perfect for plastic material or paper. Making strong, good and symmetrical bales. Baler is ready to work, we are selling it because we don't need it anymore. Csdjwrr Svopfx Acyehd

Condition: good (used), Year of construction: 2011, pressing force: 150 t, power: 0.015 kW (0.02 HP), works fine, possible to try Cedpfxsrl Tgue Acyjhd 150ton power 15KW works fine can check

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, pressing force: 5 t, filling opening width: 810 mm, filling opening length: 710 mm, bale length: 695 mm, bale width: 510 mm, bale height: 600 mm, total width: 920 mm, total height: 2,410 mm, total length: 940 mm, noise level: 60 dB, power: 1.1 kW (1.50 HP), We have a lot of brand new or used CK International balers CK51, CK101, CK100VX, CK250, CK300VX and more on our stock. Chedpjvy Drxjfx Acyjd Please contact us and to get a quote.

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur. Chodpjrxfn Uefx Acyjd

Condition: good (used), Year of construction: 2007, operating hours: 8,800 h, functionality: fully functional, pressing force: 24 t, filling opening width: 620 mm, filling opening length: 1,000 mm, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 200 kg, total width: 2,825 mm, total height: 1,940 mm, total length: 6,250 mm, input voltage: 400 V, power: 9.2 kW (12.51 HP), operating pressure: 220 bar, Presskraft: 240 kN Spezifische Presskraft: 64 N/cm² Antriebsleistung: 9,2 kW Spannung / Frequenz: 400 V / 50 Hz Taktzeit im Leerlauf: 17,2 s Pressleistung Leerlauf (theor.): 73 m³/h Breite der Einfüllöffnung x Länge der Einfüllöffnung: 620 x 1000 mm Ballenbreite x Ballenhöhe x Ballenlänge: 700 x 500 x 600-1200 mm Codevq Rplspfx Acyehd Länge x Breite x Höhe: 6250 x 2825 x 1940 mm Gewicht: 4 t Art des Verbrauchsmaterials: Draht Pressgut: Folie, Gemischtes Papier, Kartonage, Stanzreste, PET Getränke und Aluminiumdosen,Weichverpackung

Year of construction: 2008, operating hours: 40,000 h, condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Chedpfx Acokcgf Hjyod Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: good (used), Year of construction: 1993, pressing force: 60 t, filling opening width: 1,050 mm, filling opening length: 1,500 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, total length: 6,661 mm, overall weight: 12,000 kg, oil tank capacity: 800 l, year of last overhaul: 2023, Equipment: documentation/manual, HSM VK 6015 automatic channel baler I offer for sale a baler that worked for me for more than 4 years. Previously worked in a warehouse in DE, came to us in original condition. Currently dismantled, but it will be possible to start up before purchase. Optional equipment: Pre-crush flap, excess material knockout, oil cooling upgraded to a large radiator, cabinet and tank heating, wire end, bale binding sound. After disassembly replaced: Tying system (replaced all bearings, chains, sprockets, new tying heads upgraded to new HSM type, new needles) It is possible to purchase the machine with ascending belt feeder without channel. Crushing force: 600kN /. Unit pressing force: 106 N/cm² Drive power: 50 kW Voltage / frequency: 400 V / 50 Hz Work cycle time: 17 s Year of manufacture 1993 Capacity when working with cardboard 3t/h at a density of 30kg/m3 187 m3/h Bale weight depending on material 400-550kg Depth x width of loading opening: 1020 x 1500mm Bale width x height x length: 1100 x 750 x 600-1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Chedpfoudzv Djx Acysd Machine weight: 12 t Type of consumables: wire Pressed material: film, mixed paper, cardboard, die-cutting machine waste, Oil tank capacity of 800l

Condition: used, Year of construction: 2011, pressing force: 3 t, power: 0.001 kW (0.00 HP), Baler / press for waste paper, film and cardboard BRAMIDAN B3 - used. The BRAMIDAN B3 baler is a compact machine for compacting and compacting cardboard and foil. The baler has a high press ratio and effectively reduces the volume of waste. It is ideal for use in warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 77x50x60 cm. Pressing time with return stroke 24 s. The BRAMIDAN B3 cardboard compactor is a professional device that effectively reduces waste. It enables waste to be baled into ready-to-collect bales, which are double-bound using strapping. The bales are compact and easy to handle. The baler is ideal for wholesalers, warehouses, grocery shops and clothing shops. Technical specifications Model : BRAMIDAN 3 Width : 82 cm Depth : 72 cm Height : 198 cm Weight : 310 kg Power : 1.1 kW Voltage : 230 V Press force : 3 t Net price : 1799.00 euro each year of manufacture 2010 (Commodity code : MTP006934) 1929.00 euro each year of manufacture 2011 (Commodity code : MTP005286) 1999.00 euro each year of manufacture 2012 (Commodity code : MTP006932) 2049,00 euros a piece year of production 2014 (Commodity code : MTP006525) 2169,00 euros a piece year of production 2015 (Commodity code : MTP005287) 2289,00 euros a piece year of production 2017 (Commodity code : MTP005288) 2329,00 euros a piece year of production 2018 (Commodity code : MTP006933) 2399,00 euros a piece year of production 2020 (Commodity code : MTP006526) * Shipping throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland. Cjdpfstvmbtsx Acyohd

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Chsdpfjt Ucqfjx Acyod Bale outlet dimensions: 77 cm x 52 cm The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Chjdpeviymwsfx Acyod

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Chodpfx Acov Ak Npjyed Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 413.00.003, pressing force: 60 t, bale weight: 400 kg, TECHNICAL DETAILS Pressing force: 60 t Main drive power: 9.0 kW Bales Bale dimensions (W x D x H): 1,100 x 1,100 x 800 mm Bale weight: max. 400 kg Binding: 4-fold vertical MACHINE DETAILS Machine dimensions (L x W x H): 6,500 x 1,850 x 2,800 mm Weight: approx. 8,000 kg Codpfx Acowhqf Tjyohd Electrical system Operating voltage: 400 V Frequency: 50 Hz Total connected load: 28 kW Regular maintenance keeps the baler in good working order.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, pressing force: 40 t, filling opening width: 1,400 mm, filling opening length: 860 mm, bale length: 1,200 mm, bale width: 800 mm, bale height: 1,000 mm, bale weight: 400 kg, total width: 1,330 mm, total length: 4,600 mm, type of input current: three-phase, overall weight: 6,500 kg, year of last overhaul: 2023, operating pressure: 200 bar, tank capacity: 280 l, cutting force: 40 t, ABT 4000V automatic channel baler For sale channel baler with automatic binding. The machine in our use for 3 years, currently works with a conveyor and has a modified enlarged hopper. It bales cardboard foil, we are selling because we need a larger machine. Since the purchase in the machine has been replaced hydraulic oil, part of the hoses, two new pumps with modification, one preliminary fast the other main, which allows to definitely speed up binding. The machine also had its keel sliders replaced currently fully operational does not require repairs. It has additional equipment, i.e. a knockout/scraper for excess material. Ele. cabinet modernized in 2005. New pumps 2 pcs. in 2022r New oil in 2023r New sliders in 2022r overhaul of needles Machine fully operational, Manufacturer ABT 4000V Main motor 15kW Binding motor 3kW Pump 200bar Oil tank 280l Weight 6500kg Length 4600mm, width 1330mm Channel dimensions 1000-700mm Chjdsudzuaepfx Acyjd Bale weight 300-500kg depending on the material The baler has applied a unique solution of the possibility of its transport by hooklift. I have the original DTR in DE ora translation PL

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 533.02.090, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The quoted price is plus statutory VAT, ex works and without packaging. The press is cleaned, function tested, repaired and equipped with a new control according to EN16500. All spare parts used are original parts from Strautmann. Technical details: Cedswq Ifvopfx Acyshd Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of band channels: 4 Weight of press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoors/outdoors, covered Including starter bale band set, 19mm Serial number: 533.02.090 Year of manufacture: 2002

Condition: ready for operation (used), YEAR OF MANUFACTURE 1993 Codpfx Acju Hz Stsyehd 380V 35A incl. wiring diagram 3,300 x 2,200 x 2,600mm (LWH) Hopper 3,000 x 2,000 x 2,000mm (LWH)

Condition: excellent (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Chjdpfxev Ai Tge Acysd Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 533.02.564, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 400 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are genuine Strautmann parts. Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale size (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Filling opening: 1190 x 400 mm Chodpfou Aa Tnox Acysd Pressure force: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Baler weight: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: Indoors / outdoors, covered Includes bale belt starter set, 19 mm Serial number: 533.02.564 Year of manufacture: 2004

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Chsdpfx Acjv Akcieyjd Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 610.01.022, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. Chedpfx Asv Rzwmecyjd All spare parts used are genuine Strautmann parts. Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale Size (L x W x H): 1180 x 700 x 800 mm External Dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport Height: 2050 mm Filling Opening: 1190 x 600 mm Baling Pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of Belt Channels: 4 Baler Weight: 2,300 kg Power Supply: 400 V / 50 Hz Power Consumption: 4 kW Installation Location: Indoors / Outdoors, Covered Includes Bale Belt Starter Set, 19 mm Serial Number: 610.01.022 Year of Manufacture: 2004

Condition: excellent (used), Baler Hsm HL 4812 Pressing force: 480 kN Codev Ak Dgopfx Acyehd Unitary pressing force: 58 N/cm² Drive power: 15 kW Voltage / frequency: 400 V / 50 Hz Working cycle time: 33.5 s Idle capacity (theor.): 95 m³/h Loading opening width x length: 1020 x 1250 mm Bale width x height x length: 1100 x 750 x 1200 mm Bale weight: 420 kg Total length x width x height: 5158 x 1642 x 2550 mm Machine weight: 5899 kg Type of consumables: wire Compressed material: foil, mixed paper, cardboard Year 2017 15kw engine

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300034869, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned and tested for functionality. Technical Details: Manufacturer: HSM Type: V-Press 860 plus Bale size (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing pressure: 548 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Press weight: 2,010 kg Csdpevpfw Uofx Acyjhd Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: Indoors / outdoors, covered Serial number: 300034869 Year of manufacture: 2009 Please refer to the original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Brand: BRAMIDAN Model: B3 Width (cm): 94 Chedpfx Acev Akr Royod Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of production: 2010-2015 Pressure force (t): 3 Noise level (dB): 69

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: Cedpfsra Nrmsx Acyohd L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: ready for operation (used), Strautmann PP 1207 Pressure force 58 tons Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Feed opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg Csdpfx Acora Aq Dsyjhd