Horizontal band saw (stationary)

WRAVOR WRC 1050 AC

Condition: new, Year of construction: 2024, FULL AUTOMATIC HORIZONTAL BAND SAW WRC1050 FOR CUTTING VENEER - SERVO – PERFORMANCE, DOUBLE CUT Kodpsghrnbsfx Ah Nsll EFFICENT FAST CUTTING WITH HIGH CUT PRECISION with FAST CENTRATION and FAST TURNING system

Condition: good (used), Well-maintained horizontal creel. Kledpfeunhl Uex Ah Njl Passage 1000 mm. Stroke 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min Kjdpodix N Hsfx Ah Nell connections: sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: used, different types available Kodpfx Aodc A Sbsh Njll

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. Klsdpfofg E Hpex Ah Njl • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Kljdpfxocx R Dds Ah Nel Capacity 3000 l juice per hour (depending on juice temperature).

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Kjdpfxoncft Uj Ah Nsll

Year of construction: 2024, condition: new, machine/vehicle number: KU 2400, The cabbage coring machine provides the ability to cut cabbage core out of the head or more often, crush the stalk (then there is an opportunity to use raw materials 100 percent, it is also useful for the quality of sauerkraut). Combined electric and pneumatic power.​ General Features: All materials that come in contact with products are made from food-grade materials Productivity is up to 2400 heads per hour Two coring lines Kledjffwfyspfx Ah Njl Can be used to cut irregular shape cabbages also Easy to clean, can be washed with low-pressure water; Can be equipped with wheels with a fixation for easy transportation; Can work separate as well in line with cabbage shredder SS80 7500kg/h Various electrical connections and standards available on request;

Condition: used, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, cutting length (max.): 6,100 mm, total length: 8,000 mm, overall weight: 3,000 kg, type of input current: three-phase, height adjustment type: electric, cutting width (max.): 650 mm, saw band width: 50 mm, Equipment: chassis, Seldom-used Woodmizer LT70 Mobile Cutting length: 6.10m Electric motor: 25 HP Model for 50mm saw bands Cut thickness calculator: Accuset2 Band lubrication system: Lube-Mizer Electric height adjustment Electric feed Hydraulic package Plus3: log turner, log loader, 2x vertical side supports, manual side support, support rollers (one powered), center clamp A-bed rails Chassis (3000kg) with road approval Debarker Radio remote control Approx. 300 hours of use Klsdpfxjwn Tygj Ah Nsl Year of manufacture: 2023 Viewing possible in 16775 Gransee OT Neulögow

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Kedpjwfdi Hefx Ah Noll