Used Abus Zlk for sale (94)

Condition: good (used), Year of construction: 1984, Indoor crane, crane, push carriage, crane undercarriage, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage for single-girder bridge crane, headcarriage for double-girder bridge crane, double-girder overhead travelling crane Prjdsvt Rapjpfx Adnod -Manufacturer: ABUS, 1 set of endcarriages for double girder overhead crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 Kw -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Prodpfjxmf R Ssx Adnjd Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 18 / 405156 / 1, overall weight: 7,490 kg, total width: 16,480 mm, load capacity: 14,000 kg, DGUV certified until: 12/2025, lifting height: 6,000 mm, Equipment: documentation/manual, ABUS overhead travelling crane with radio control, 14,000 kg Double-girder overhead crane H8 Predpfoxywwqjx Adnsd Double-girder crane ABUS 14.0 t Year of manufacture: 2007 / Radio control retrofit in 2022 Span: 16,480 mm Further data available in the documents attached.

Year of construction: 1984, condition: used, weight max. 20 t clamping width 15065 mm stroke / mm Predpfx Adoudditenod ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: Prodsw Rddyopfx Adned • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Manufacturer: DEMAG, Column jib crane, lifting capacity 500 kg -Large base plate: 1000 x 1000 mm, requires no foundation -Protrusion: 6,050 mm -Total height: 3610 mm -Hook height: mm Prsdpfx Adjxzt Smjnod -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 6330/1000/H1500 mm -Weight: 1020 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD268, ABUS overhead travelling crane, crane runway, bridge crane, hall crane, crane Load capacity / lifting capacity: 2 t - 2000 kg Span: 5550 mm, external dimension approx. 5700 mm Year of manufacture: 1989 with pendant control Lifting height: 6 m Hoist: GM820 F6 Overall height (top of crane to hook): approx. 610 mm End carriage length with buffer: approx. 220 cm Including 7 m HEB200 running rails and 7 m conductor rail The crane is dismantled and immediately available Very good condition, inspection book available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Pedpfx Adoxmuvqjnord Shipping by freight carrier is possible—please inquire with your postal code Collection preferred

Condition: used, Year of construction: 2011, arm length 2500 mm total column height 3100 mmm weight max. in kg 125 kg swivelling range 270 Grad height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m². Prjdpfjvrk Ahsx Adned

Condition: used, Due to cessation of operations from 2026, ABUS pillar jib crane for sale 500 kg lifting capacity Prodpfsxxtdqex Adnod

Condition: used, machine/vehicle number: 001634U, For Sale Used single-girder overhead crane ± 11.690mm x 10t Podpfx Adew Ighcsnerd

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Prodpfx Aewh Niqednod Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Prjdpjxcil Ssfx Adnjd Fine lifting speed: 1.8 m/min 1 load chain

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD239, ABUS overhead crane runway bridge crane hall crane crane Load capacity / lifting capacity: 1t - 1000kg Track gauge: 6550mm, external dimension approx. 6700mm Pjdpfx Adoxmuu Tsnerd Year of manufacture: 1989 with floor control Lifting height: 6m Hoist: GM810 F6 Construction height from top edge of crane to hook approx. 610mm End carriage length with buffer approx. 220cm Includes: 10m HEB160 running rails and 10m conductor rail The crane is dismantled and immediately available. Very good condition, inspection book available. Pillar and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, in addition to Errikla, Hadef, Stahl KT 2000, etc. Shipping via carrier possible, please inquire with postal code Collection preferred.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 17612, Year of construction: 2023, operating hours: 2 h, load capacity: 2,000 kg, ABUS double-girder crane ZHB-X 2t x 6030 (HB250). Classification: S3. Crane girder length: 6030 mm, crane span: 6290 mm. Crane dismantled and ready for transport. Price includes supports. Sale price without supports: €26,729 Psdpfjxl A I Sox Adnjrd

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: 204.994, The machine is not more in use and therefore is for sale. The crane can lift up to 25t weight. The crane is available immediately. We offer assistance for disassembling and loading the machine. For more info please send inquiry. Psdswwtucjpfx Adnjrd

Condition: good (used), Year of construction: 2003, ABUS column-mounted slewing crane Load capacity: 100 kg Lifting speed: 12.00 m/min Motor: 0.43 kW Manual operation Slewing arm outreach: 2.9 m Podpfxsxr Aq Te Adnjrd Column height: 2.5 m

Condition: good (used), functionality: fully functional, -KOM 3027- On offer here is a fully functional ABUS gantry crane. Attention: Special feature: Operation on the crane hook. Technical data: Predpfju Hy Sxsx Adnjd maximum load: 160 kg Length of the rail: approx. 7,500 mm Width of the rail: approx. 2,800 mm

Condition: used, Year of construction: 1988, Year ca. 1988 Pjdpfx Asidrhyjdnord arm length 2000 mm weight max. in kg max. 1000 kg height of hook max. 2000 mm WITHOUT LIFTING DEVICE . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: MIKA 38106 107 122 113 - 144 145, Technical data: 1 ABUS LS pillar jib crane, rated load 500 kg Crane available in 6 identical versions!!! Podpfjxvmt Hsx Adnerd Rated load at full outreach: 500 kg / 0.5 t Height: approx. 4.05 m, lower edge of jib: approx. 3.5 m Outreach: approx. 2.5 m, hook height: approx. 3.2 m Total weight: approx. 500 kg Fitted with 500 kg Abus chain hoist with push-button pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 270° Crane is dismantled and packed on pallet Good condition, see pictures Only the crane system visible in the pictures is being sold Shipping via freight forwarder or collection by appointment

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm Pedeu Nvmdopfx Adnord column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: used, Year of construction: 1981, arm length 3600 mm total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm Prsdpfextqwqex Adnjd height of hook ca. 4000 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled.

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Weight complete approx. 400 kg, connection to 400V 50Hz Prjdpfxsvbck Aj Adnod Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 1995, Technical details: lifting capacity: 3,2 t lift: - mm span width: 5300 mm stroke speed: 5,0 m/min rope diameter: 6,5 mm precise lift: 0,80 m/min electric control: ja lifting height max. hook position: 6 m travel of hook: 6000 mm total power requirement: 13,6 kW weight of the machine ca.: 5,3 t transport dimensions LxWxH: ca. 6,8 x 2,35 x 1,5 mit 4 Paletten m Crane classification DIN 15018 H2 B3 Crane trolley: -engine number GE 1348 -Drive unit group: 1Am -4x wheels, travel wheel Ø 100mm Prodpfxowm Ivtj Adnsd -fine crane travel 5.0 m/min. -Crane travel 20.0 m/min. -disc brake Trolley undercarriage: -Speed 20.0 / 5.0 m/min. -power .12 / .03 kW Lifting gear Abus -FDB GM 800.3H06/S12873E -load capacity 3200 kg -speed 5.0 / 0.80 m/min. -Power 3.20 / 0.45 kW (50ED) -Hook path 6.0 m - Rope Ø 6.5 mm Floor operation via push-button switch, electric i.D. *

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH363-364-366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Predpfx Aoxtyvpsdned Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: NOH338, ABUS ELV overhead crane, crane runway, bridge crane, indoor crane, crane Load capacity / lifting capacity: 10t - 10,000kg Prsdpfx Adsxtyl Dened Span: 12,990mm, external dimension approx. 13,250mm Year of manufacture 2011 with radio and pendant control as reserve Lifting height: 6m Travel height from top of crane to hook approx. 950mm Main girder length with buffer approx. 280cm Further data will follow Crane is dismantled and immediately available Very good condition, inspection book available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with postcode Collection preferred