Drum Chipper ATH series

S&F GmbH ATH 300

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Bjdpeq Nmw Ijfx Aknjlp

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz Bljdpfoy Iabdsx Aknep

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils Bedpfx Akewp E Tnonolp AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 Bsdpfxjr Ak Rgs Aknjlp – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Bedpfxol Sli Dj Aknjlp

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Bedpfxjtmup Us Aknolp Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Bledjdprvuopfx Aknjp Price per 1 piece

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Frame roller conveyor 4-strand puller Viewing by appointment. Bljdpov Ummbjfx Aknjp

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Bljdpfjqmi Irex Aknjp Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Bljdpfxsm Rhfde Aknep