Bar feeder LNS

LNS

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Retraction device: 600 mm Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Hfedpfx Aajzl E Eae Esi Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Maximum feed rate: > 100 m/min Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Hfodpfx Aasvnrius Eei Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Hedpfx Aaezl D Hps Eefi

Condition: good (used), Year of construction: 2007, 1 x loading magazine Hodpjvt N Dysfx Aa Eefi LNS Sprint 555 Year of manufacture: 2007 Bar processing D: 5 - 55 mm Bar length: 3,200 mm Previously attached to a Goodway CNC lathe. The loading magazine can be viewed at any time at our warehouse in Reichenbach

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31t- Model B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm Hfedpfxjx D H Sfj Aa Esi • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm

Condition: used, TECHNICAL DETAILS - Bar diameter : 6 - 80 [mm] - Bar length : 1600 [mm] Hfjdjy H Rciepfx Aa Eji POWER SUPPLY - Supply voltage : 200 - 480 [V] - Total installed power : 5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2048 x 1486 [mm] - Machine height : 1748 [mm] - Machine weight : 600 [kg]

Condition: used, TECHNICAL DETAILS - Bar diameter : 1 - 12 [mm] - Bar length : 2000 [mm] Hjdpfxsvxlmus Aa Eefi

Condition: excellent (used), - Heidenhain digital display. - Accessories available. Travel paths: Hedpfx Aaow Hqf Re Esfi X – travel 280 mm Y – travel 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: used, TECHNICAL DETAILS Hfedpfx Aaju Agw Te Eei - Bar diameter : min/max : 3/10 [mm] - Bar length : 3800 [mm]

Condition: used, TECHNICAL DETAILS - min. / max. Ø : 2 / 16 [mm] - max. bar length : 4 [m] Hjdpfx Asuhbhzsa Ejfi - diameter : 17 - 13 - 6

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Hodpfxogyy I As Aa Eefi Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: used, TECHNICAL DETAILS Hodpfxjuhbhbj Aa Esfi - Bar diameter : 5-10-15 [mm] - Max. bar length : 4500 [mm] - Number of bars : 1

Condition: good (used), Bar length up to 1600 mm. Hedpjhvz Hzofx Aa Ejfi Some parts missed. For spare parts.

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Hfodpov Td Elsfx Aa Eji Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey Hsdpfxjwnprxo Aa Eefi