Hydraulic single column press

WMW Zeulenroda PYE 160 S1

Condition: new, Year of construction: 2026, machine/vehicle number: 06-26-005, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 360 mm, ram plate width: 750 mm, ram plate length: 450 mm, distance table to ram: 800 mm, total length: 2,200 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic single-column press PYE 160 S1/M >completely overhauled / CE marking with  24 months warranty< from the manufacturer ZEULENRODA PRESSTECHNIK Hydraulic press for forming and assembly operations, pressing force 160 t Complete overhaul with CE conformity Ram stroke: 500 mm Clamping plate, press table: 900 x 580 mm with customer-specific clamping arrangement One-piece C-frame press in steel welded construction Newly manufactured table and ram plate according to customer requirements! Ram plate, twist-proof 3-sided protective guard, on the operator side via light curtain, on the side via sliding guard elements SIEMENS control system -new- Conversion to electronic stroke measuring system Remote maintenance ----- Further services, plant retrofit Control / Operation: • Rapid traverse function • USB interface for data exchange • Touchscreen / visualization SIEMENS • Two-hand control unit with two-channel monitoring of the two-hand synchronous circuit on the press table, (incl. 5m cable) • Limit switches for stroke adjustment are replaced by initiators • Monitoring of the initial stroke after completion • Replacement of the existing 60-V DC solenoids on the pilot control valves with 24-V DC solenoids, including the necessary intermediate plates Kodpfx Ajzf Ht Sobnodr • The press has an electronic stroke measuring system (including teach-in function and display of the current ram position). This eliminates the mechanical cam switching mechanism. Hydraulic system • Hydraulic safety block for monitoring the closing movement on the main cylinder • Position-monitored directional control valve for the up and down movement of the ram • Replacement of the motors of the main and control pump • Replacement of the seals on the main cylinder • Fine filter with contamination indicator • All installation and piping work New documentation including CE declaration of conformity Delivery time / Implementation time: approx. 5 months

Condition: used, Technical details: pressure: 100 t Ksdpfevc Ax Nox Abnodr daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Kdsdjqy E I Ropfx Abnjr

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm Kjdpfxju Nfvuj Abnsdr passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Year of construction: 2016, Industrial robot Manufacturer: Kuka Type: KR30-3 Year of manufacture: 2016 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 controller Weight: 150 kg Software version V8.3.40 Interface X11 Kuka touch panel Kuka connecting cables 22726 Ksdpfx Aeq Dz H Tjbnedr

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Kdsdpfxsw D Awme Abnor dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm Ksdpfx Abjv Rgwxjnedr total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: used, functionality: fully functional, machine/vehicle number: H008E03536T, Year of construction: 2019, operating hours: 9,670 h, load capacity: 30,000 kg, lifting height: 4,000 mm, free lift: 1,870 mm, fuel type: diesel, mast type: duplex, construction height: 3,900 mm, power: 194 kW (263.77 HP), fork length: 2,440 mm, empty load weight: 44,280 kg, drive type: Diesel, Heavy Duty Forklift Truck - Diesel Chassis Number: H008E03536T Load Center: 900 mm Fork Width: 300 mm Fork Thickness: 105 mm Mast Type: Duplex Transmission: ZF WG211 Kedpfxjxzv Hts Abnedr Condition: Operational and fully functional Technical Condition: Good Front Tire Type: Pneumatic Front Tire Size: 16.00-25 Front Tire Condition: 20 - 40% Rear Tire Type: Pneumatic Rear Tire Size: 16.00-25 Rear Tire Condition: 60 - 80% Description: In addition to this BRAND - MODEL, we have around 150 heavy-duty forklifts, container handlers, reach stackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing on fair terms are always possible with us. We are also happy to purchase your used equipment directly, even if you do not acquire a vehicle from us. Please feel free to call me, Marco Levermann, for detailed advice on this BRAND - MODEL. By the way, our specialist forklift workshop is focused on the repair and maintenance of large equipment from 8 tons and up. We can also list your vehicle on consignment sale at our facility. Sideshifter, fork positioner, Full cabin, air conditioning, electric cabin lifting

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Kjdpfxjwp Nv He Abnodr Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic, BMSY 360 DGH ECO Round Cutting Capacity mm: 360 Flat Cutting Capacity mm: 510 x 360 Square Cutting Capacity mm: 360 +30° Round Cutting Capacity mm: 360 +30° Flat Cutting Capacity mm: 440 x 360 +30° Square Cutting Capacity mm: 360 +45° Round Cutting Capacity mm: 360 +45° Flat Cutting Capacity mm: 390 x 360 Ksdog Ekttopfx Abnedr +45° Square Cutting Capacity mm: 360 +60° Round Cutting Capacity mm: 200 +60° Flat Cutting Capacity mm: 200 x 360 +60° Square Cutting Capacity mm: 200 -30° Round Cutting Capacity mm: 360 -30° Flat Cutting Capacity mm: 440 x 360 -30° Square Cutting Capacity mm: 360 -45° Round Cutting Capacity mm: 360 -45° Flat Cutting Capacity mm: 390 x 360 -45° Square Cutting Capacity mm: 360 -60° Round Cutting Capacity mm: 260 -60° Flat Cutting Capacity mm: 260 x 360 -60° Square Cutting Capacity mm: 260 Motor Power, Main Drive kW 3 Hydraulic Pump Power kW 0.37 Motor Power, Coolant Pump kW 0.12 Band Speed, stepless: m/min 20 - 100 Saw Band Dimensions mm: 4800 x 34 x 1.1 Height of Work Surface mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double Miter Saw Stepless Band Speed Hydraulic Vise High-Performance Gearbox Hydromechanical Saw Band Tensioning Saw Band Brush Digital Display for Miter Angle