Used Hurco Bmc 4020 for sale (150)

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Iasdpfxszatlxs Aquju Tool magazine for 24 tools, SK 40 DCF software

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Iaedpfey T Hkpex Aqueu Condition: used Machine is complete Inspection possible while powered on

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition Iaodpfx Aqstrhq Hsusu

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Iaedpsw Nklhofx Aqueu Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm Ijdpfx Aqjvh Nbujusau z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Iodsw Tdiujpfx Aqueau Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Iasdpop I Hanjfx Aqusu

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Iodet Takaopfx Aqueau Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Price: negotiable

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Iajdpfey T Ekbjx Aqueu Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: used, Year of construction: 2012, Lathe fully functional. Ijdpfoy R Rdnex Aqueau

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX24 vertical machining centre was manufactured in 2004. It features an impressive X-axis travel of 610 mm and Y-axis travel of 508 mm, with a maximum spindle speed of 10,000 RPM. The machine includes advanced control options such as synchronous tapping and advanced velocity control. If you are looking to get high-quality machining capabilities, consider the Hurco VMX24 vertical machining centre we have for sale. Contact us for further details. Iedszc R Atopfx Aqujau - CNC Control: Ultimax (Dual-screen console configuration)- System Software Version: 2.37.03e (Patch j) Oct 7 2013- Machine Class: Vertical- Machine Hour Meter: 0.0 (System screen value)- Spindle Hours: 10,500 h (Per text listing)- X-Axis Travel Limit (Plus): 610 mm- X-Axis Travel Limit (Minus): 0 mm- Y-Axis Travel Limit (Plus): 508 mm- Y-Axis Travel Limit (Minus): 0 mm- Z-Axis Travel Limit (Plus): 0 mm- Z-Axis Travel Limit (Minus): -610 mm- Maximum Spindle Motor Speed: 10000 RPM- Maximum Spindle Tool Speed: 10000 RPM- Maximum Rapid Traverse: 30000 mm/min- Maximum Contouring Feedrate: 15240 mm/min- AC Voltage: 400 V, 3-Phase- Frequency: 50 Hz- Largest Motor Rating: 7.5 kVA- Full Load Rating: 18 kVA- Interrupt/Breaking Capacity: 10000 Amps- Country of Manufacture: Taiwan- Control Options Installed: 1. Pocket with Islands, 2. DXF, 3. Synchronous Tapping, 4. UltiNet, 5. Advanced Velocity Control, 6. Ramp/Helix Entry- Structural Upgrades: New bearings fitted on X and Y axes- Exclusions: Vise, tools, and other shown accessories are not included

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories Iaedpfjzc Rziox Aqusu

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Iajdpfx Aeu A Dnpoquju Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,000 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details. • Control: WINMAX • Clamping System: SK40 DIN69871 AD/B • Tool Holder: SK40 • Table Size: 1,170 x 507 mm • Spindle Hours: Approx. 10,000 h • Condition: Used Ijdpfozc If Ssx Aqujau • CE Marking: Yes • Frequency: 50 Hz • Voltage: 400 V • Power Supply: 3 Phase • Largest Motor: 13 kVA • Full Load: 20 kVA • Interrupt Capacity: 10,000 A • Short Circuit Current: 22 kA RMS Symmetrical • Maximum Ambient Temperature: 35 °C Technical Specification Through-spindle Coolant No

Condition: used, Year of construction: 2015, operating hours: 1,488 h, Hurcon TM6 CNC Lathe Iasdpfx Aezd Hvqoqusu Year of construction 2015 Winmax Control Swarf Conveyor Only 1488 Hrs spindle time Immaculate machine ready to go 12 station turret 45mm bar capacity Weight 3500kg Thankyou for taking time to look at this excellent machine that will enhance any CNC workshop

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Iasdpfxsx Iikbj Aqusu Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: good (used), Year of construction: 2007, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, overall weight: 4,700 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, Control system: Ultimax 4 Distance from spindle center to table: 150 - 760 mm Drive power – main spindle: 7.5 kW Isdpfx Aqozcu R Usuoau Tool holder: SK 40 Table clamping area: 760 x 510 mm Max. table load: 700 kg Tool changer with 24 stations

Condition: ready for operation (used), Year of construction: 2004, operating hours: 30,826 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, controller manufacturer: HURCO, controller model: Ultimax, overall weight: 3,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VM1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VM1 vertical machining centre we have for sale. Contact us for further details. • Cutting feed rate: max. 11,400 mm/min • Table size: approx. 760 × 355 mm • Tool changer: 16 stations • Machine hours: 30.826 • Condition: Used, good overall condition; fully functional and ready for operation Iaedpeylnbfsfx Aqusu Additional equipment • Coolant pump • Chip conveyor • Machine vise • 3D touch probe • Various collet sets / SK 40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

Condition: ready for operation (used), Hurco Process Board 415-0194-001A with Hurco Dual RS232 Board, used, 100% functional Isdpfxji Ea R Io Aquoau

Condition: used, Year of construction: 2006, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: WINMAX, Hurco VMX 24S – Vertical CNC machining center – Year of manufacture 2006 – WINMAX control For sale is a Hurco VMX 24S vertical CNC machining center, manufactured in 2006, equipped with the user-friendly Hurco WINMAX CNC control. Technical data / Equipment: Manufacturer: Hurco Type: VMX 24S Year of manufacture: 2006 Control: Hurco WINMAX Machine type: Vertical CNC machining center Travel in X-axis: approx. 610 mm Travel in Y-axis: approx. 510 mm Travel in Z-axis: approx. 610 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Internal cooling: 30 bar Tool changer: 24 tool positions Operating hours: approx. 34,000 hours Machine weight: approx. 5,000 kg Condition: used Iasdpfxszdkt Ts Aquju Availability: by arrangement Description: The Hurco VMX 24S is a proven vertical CNC machining center with a solid machine structure and a very user-friendly WINMAX control. The machine features a 15,000 rpm spindle, SK 40 tool taper, 30 bar internal cooling, and a 24-position tool changer. With approximately 34,000 operating hours, the machine is in used condition, reflecting its year of manufacture. It is particularly suitable for flexible manufacturing tasks, single parts, small series, toolmaking, and mold making. The Hurco WINMAX control enables quick and easy program creation directly on the machine. The machine can be inspected by arrangement. We will gladly provide further technical data, images, or videos upon request. Note: Please check the technical data, equipment, and accessories before completing the purchase. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2003, A vertical CNC machining center is offered. Table diameter: 320mm, travels X/Y/Z: 1270mm/660mm/610mm, spindle speed: 16000rpm, tool holder: SK40, number of axes: 4, rapid traverse: 30000mm/min, max. feed rate: 15240mm/min, rotary table spindle bore: 105mm, rotary table center height: 225mm, control system: WINMAX MIL, overall dimensions X/Y/Z: approx. 4750mm/3200mm/3000mm, weight: approx. 9000kg, operating hours: approx. 61762h. Including a Yaskawa spindle motor and Hurco transport equipment. Documentation available. Inspection possible by appointment. Expected to be available from December 2026. Iajdpfxozdkn De Aquju

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Isdpfxsx N E H Uj Aqueau Tool change optimization software Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 2007, operating hours: 2,777 h, functionality: fully functional, Controller ULTIMAX 4 DSM Iasdpezbx Dpefx Aquou Table size 762 x 355 mm X-travel 660 mm Y-travel 356 mm Z-travel 456 mm Spindle speed 10000 rpm Tool holder type SK40 ATC-Magazin 16-fold Spindle power 11/9,4 kW Weight 2800 kgs Dimensions LxWxH = 1800 x 1600 x 2500 mm Accessories, features - Software options: DXF, rigid tapping, pocket/island, herical/ramp - Chip auger - Coolant tank - Machine mounths - RENISHAW zero point presetter system with touchprobe - Some SK40 toolholders - Towel lamp The machine has been checked by HURCO engineer. RENIOSHAW ballbar test has been made on X-Y axes and shows 13 um (like at new machine). Original spindle hours 2777!!!! Very good condition.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Isdpfjzc Icwjx Aqusau Approximately 11,000 operating hours.

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm Iajdpfszbmzvjx Aqusu b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!