Used Welding tables for sale (579)

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Cjbvl Nusfk Aivs Ssgt For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cgobvefk Ai Dol Nu Sot For more information, follow the link:

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 850 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. For more information, follow the link: Cgebvl Nsfk Aigju Set

Condition: new, table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 733This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Cgsbvl Nuefk Aife Sst For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 2480 x 1230 x 800table width: 1230table length: 2480weight approx.: 650 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cgsbvl Nujfk Aihe Sot For more information, follow the link:

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 2480 x 1200 x 930-1003table width: 1200table length: 2250working height: 930 -1003plate thickness: 12 Product specifications welding tables - The size of the top is 2480mm x 1200mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter. Additional options: engraved lines:                       85¤  Hole diameter 16 mm:            80¤  Hole diameter 28 mm:            80¤  Diagonal hole pattern 50x50: 220¤  4 adjustable wheels:               360¤ The welding tables with feet and castors are adjustable in height. Working height from 92 to 93 cm. Cebvlsukkrvj Nu Sjgt The feet can be adjusted in height up to 10 cm more. A welding table with adjustable wheels has a minimum working height of 87 cm. You can adjust the rollers to a maximum working height of 100 cm.

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 1000 x 1000working height: 93-103 Product specifications welding tables - The size of the top is 1000mm x 1000mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. Cgobsukkr Asvl Nu Sst - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter.

Condition: new, Year of construction: 2024, Diameter of the holes: 20 mmmessurements (LxWxH): 2250 x 1000 x 1000table width: 1000table length: 2250working height: 93-103plate thickness: 12Medium welding table Product specifications welding tables - The size of the top is 2250mm x 1000mm - Round reinforcement edge of 140mm in height, provided with a two-row hole pattern. - The hole pattern is centre to centre 100mm by 100mm. - Provided with the necessary reinforcement ribs in width and length. - The material of the table is S355, stained and oiled. - The legs are fitted with ball joints and are adjustable in height. - The welding table is oiled and stained. This creates a smoother work surface and the table is less prone to welding spatter. Additional options: engraved lines:                       75¤  Hole diameter 16 mm:            80¤  Hole diameter 28 mm:            80¤  Csbvl Nusukkr No Segt Diagonal hole pattern 50x50: 150¤  4 adjustable wheels:               360¤

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cobvl Nujgrvwfj Segt For more information, follow the link:

Condition: new, More technical data on request Cgjbjhqyqiovl Nu Sot Starter set clamps including accessory trolley

Condition: new, table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 555This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Cgobvl Nuofk Aice Set For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 2980 x 1480 x 650 bis 1050mmtable width: 1480table length: 2980weight approx.: 945This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Cgobvl Nusfk Aino Set For more information please follow this link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950 mmtable length: 1950weight approx.: 358This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Cjbvjfk Ai Aol Nu Sjgt

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cjbvl Nefk Ai Eou Sjgt For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 288 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cjbvefkzcvjl Nu Sjgt For more information, follow the link:

Condition: new, table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cebvofk Aimsl Nu Sjgt For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 630This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Cobvlsfk Aipe Nu Sogt For more information please follow this link:

Condition: new, More technical data on request Cobvl Nusd Aca Dj Segt

Condition: new, table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 315 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Csbsfk Ai Hsvl Nu Segt For more information, follow the link:

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cgsbvl Nefk Aiwou Sjt For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 425This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Cobvl Njfk Aixou Segt

Condition: new, table height: 650 - 1050messurements (LxWxH): 1980 x 1480 x 650 bis 1050table width: 1480table length: 1980weight approx.: 491This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Cebvl Nujfk E Dzo Segt

Condition: new, table height: 800 mmmessurements (LxWxH): 1480 x 1480 x 800table width: 1480table length: 1480weight approx.: 332 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cgebvl Nuegrz Tpe Set For more information, follow the link:

Condition: new, table height: 650 - 1050messurements (LxWxH): 1450 x 950 x 650 bis 1050table width: 950table length: 1450weight approx.: 428This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Csbvl Nujgrvwis Sjgt For more information please follow this link:

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Cebvl Nofk Ailou Ssgt For more information, follow the link: