Used Deco 13 for sale (10,879)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 33,594 h, This TORNOS DECO 2000/13 was manufactured in 2000. A robust Swiss type turning machine with a bar passage of 16 mm and maximum spindle power of 9.7 kWh. It includes an IEMCA GENIUS 226/32 loader and a CONVEYORS IND. ASS. TMTPF 1440 conveyor. Equipped with an automatic fire extinguishing system from Kraft & Bauer. Consider the opportunity to buy this TORNOS DECO 2000/13 Swiss type turning machine. Contact us for more information. Additional equipment Ihjdpfjyan Ibex Ah Net • Loader • Conveyor • Automatic Fire Extinguishing System Machine Benefits Technical Machine Benefits • Maximum fixed/rotating tools: 20/16 • Bar passage: 16 mm • High spindle speed capability Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1999, This TORNOS DECO 2000/13 was manufactured in 1999. It features a bar passage of 16 mm and supports up to 20 fixed and 16 rotating tools. Equipped with an IEMCA loader, CONVEYORS IND. ASS. conveyor, and additional oil filter tank, this machine ensures efficient operation. Consider the opportunity to buy this TORNOS DECO 2000/13 swiss type turning machine. Contact us for more information about this machine. Additional equipment • Loader • Conveyor • Additional Oil Filter Tank • Additional Oil Filter Tank Iedpoyalqmofx Ah Njht Machine Benefits Technical Machine Benefits • Bar passage: 16 mm • Maximum fixed tools: 20 • Maximum rotating tools: 16 Extra Information Machine still under power

Condition: good (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 2491, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Iedpsw Uc D Hsfx Ah Neht Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 180 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 Isdpfjuhayijx Ah Njht - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 6 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 53892 [h] EQUIPMENT - CNC : FANUC PNC DECO - Rotating tool motor on : S2,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 160 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] Iedpouhaz Tofx Ah Noht COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 X 7270 [mm] - Machine height : 1950 [mm] - Machine weight : 3000 [kg] MACHINE HOURS - Number of hours under power : 22834 [h] EQUIPMENT - CNC : Fanuc PNS DECO - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : ROBOBAR SSF

Condition: used, TECHNICAL DETAILS - Number of axes : 10 Ihedpfxeuhayps Ah Njt - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 180 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 6 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 30161 [h] EQUIPMENT - CNC : FANUC PNC DECO - Rotating tool motor on : S2, S3, S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Iodpfxew T Tcwe Ah Neht Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] Ihedpouhhp Sofx Ah Net POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

Condition: used, Swiss-type cnc lathe TORNOS DECO 13A Ihedpfx Ahouhhp Ee Nst

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 Iedpfsuha D Usx Ah Nsht - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 42762 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : Iemca Genius 118 / 32 LL - Cooling unit

Condition: used, TECHNICAL DETAILS Tool presetter for Deco 7 Ihjdpfx Aouhb Sajh Not

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm coil weight: 13 t Ihedpfx Ahebh S Dyo Not mandrel Ø: 508 mm

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t Ihodjrnq T Njpfx Ah Njt coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Isdpfxornq Ufj Ah Njht reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 415 mm, Tested forklift battery for your truck – 48V 3PZS 375Ah – Special tank + 1 year warranty + Including Aquamatik (automatic watering system) + Including end connectors & REMA 320 plug (other plugs can be installed if required) + Capacity: min. 90–100% (C5 capacity report supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Weight: approx. 580 kg Suitable for the following models and others: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Toyota 7FBR13 Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Gjbnswqdtis Nkmgxsbp Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Isdpfx Ajwzvtvsh Neht Common battery sizes available – please inquire. Transport possible.

Condition: used, functionality: fully functional, The used STOW shelving system (Type: Stowshelf) is a high-quality solution for organized storage in workshops, warehouses, or industrial facilities. With approx. 13 m total length, 60 cm depth, and 3.0 m height, this racking system features robust galvanized steel shelves (each 126.5 × 60 cm, load capacity up to 100 kg per shelf) across 7 storage levels. The frames are galvanized and pre-assembled – ideal for quick and hassle-free installation. This shelving unit is available immediately from stock – perfect for anyone looking to purchase a robust and sustainable used racking system. Note: Racks must be secured against tipping on site. The uprights can be shortened to an approximate height of 230 cm. Please note: The shelving described here serves as a sample configuration. The STOW shelving system is modular and can be individually configured in the length you require – tailored to your needs. PRODUCT DETAILS: Height: approx. 300 cm Depth: approx. 60 cm Length: approx. 1300 cm Manufacturer: Stow Type: Stowshelf Shelves: approx. 126.5 × 60 cm, galvanized Load capacity: 100 kg per shelf Uprights: approx. 300 × 60 cm, galvanized, pre-assembled Storage levels: 7 tier levels Version: Used STOW SCOPE OF DELIVERY: 11 x uprights (approx. 300 × 60 cm), pre-assembled 70 x shelves (approx. 126.5 × 60 cm) 280 x shelf supports 3 x cross bracing sets Price: €880.00 net €1,047.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: Nationwide delivery across Germany via our partner forwarding agency – freight costs depend on postal code Professional installation and dismantling by trained teams available as an option Rack inspections according to DIN EN 15635 by certified inspectors Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to provide you with a non-binding quote – tailored to your specific requirements. Iodpfx Ahjx Tfwzo Njht Whether new construction, conversion, or extension – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! See our pallet racking, warehouse racks, and other solutions first-hand. Many systems are fully assembled and ready to experience directly on site. Our expert consultants are available to answer your questions and provide personalized advice – we look forward to your visit! Still haven’t found the right solution? Visit our website – here you’ll find a quick overview of many offers and variations on our listed items! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or give us a call. Our phone number can be found on our company page. You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA – German quality and precision manufacturing. Designed for holding drills and machining tools on CNC milling machines, machining centers, and conventional machines with SK40 DIN 69871 taper. 📌 Technical specifications: . Manufacturer: GEWEFA – Made in Germany . Type: SK40 × Ø1–16 mm . Catalog number: 28.05.046.001 / 28.05.046.002 . Taper: SK40 DIN 69871 AD/B . Clamping range: Ø1 – 13 mm . Year of manufacture: 2007 Iodpfx Ahexizbfo Noht . Condition: used, very good – fully functional ✅ Advantages: . Precision manufacturing – high concentricity and tool stability . Genuine product from Germany – not a Chinese copy . Ideal for serial production and precision machining . Ready for immediate use. Price quoted per piece.

Condition: excellent (used), mileage: 1,130,000 km, power: 460 kW (625.43 HP), first registration: 02/2013, Equipment: parking air conditioner, For sale: tractor unit or combination Volvo FH 13 EEV, year 2013, 460 hp. Mileage: 1,130,000 km. Features: stationary air conditioning, air suspension front and rear, factory ADR, refrigerator. SCHMITZ STANDARD semi-trailer, year 2013: serviced, sliding roof, pallet boxes, 385/65/22.5 tires, SAF axles, good floor, holder for 2 spare wheels. Semi-trailer Smitz. Ihedpfx Aew A Imwsh Njt

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits Iodpfxeyan Sgo Ah Noht • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: ready for operation (used), Year of construction: 2006, operating hours: 28,791 h, This TORNOS DECO 20A was manufactured in 2006. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can accommodate up to 21 fixed and 15 rotating tools. It includes an IEMCA BOSS 332 E/R loader and a CONVEYORS IND. ASS. TMTPF 2294 conveyor, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 20A Swiss type turning machine. Contact us for more information about this machine. Additional equipment • Loader • Conveyor • Automatic Fire Extinguishing System Machine Benefits Technical Machine Benefits • Maximum fixed/rotating tools: 21/15 Extra Information Iodeyan Iuspfx Ah Neht Machine still under power

Condition: used, Year of construction: 1979, table longitudinal travel / mm cross travel / mm vertical movement / mm incl. vice Table dimensions: 1300x400mm Ihjdpfxouddp He Ah Nst The machine is sold without accessories.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ihedpfsyag Dzjx Ah Net

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdoyag Duspfx Ah Noht

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ihedpfx Aheyag Ado Nst

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfeyagz Tox Ah Nsht