Spindle

WEISS 174405B

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Fjdpfxoy Eu Tvo Ad Ispi Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Fpsdpfsnzhx Hex Ad Iei Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: excellent (used), Year of construction: 2017, operating hours: 47,000 h, functionality: fully functional, DMG MORI DMU 60 eVo, year of manufacture 2017 5-axis universal machining center in very good condition Technical data / equipment: Manufacturer: DMG MORI Type: DMU 60 eVo Year of manufacture: 2017 Control system: Heidenhain TNC 640 User interface: ERGOline Control with 19" screen Travel ranges: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm Spindle: speedMASTER motor spindle Tool interface: SK 40 / BIG-PLUS Speed: 18,000 rpm Power: 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Air blow-through through spindle center NC rotary table: Clamping surface: 600 x 500 mm B-axis: -5° to +110° C-axis: 360° Max. table load: 400 kg Direct measuring systems Table cooling Tool magazine: 120 tool positions Chain magazine with dual gripper Cooling / chip removal: Internal coolant supply (ICS) 40 bar / 23 l/min 600 liter tank Paper band filter Extended chip flushing Scraper conveyor Bed flushing Flushing gun Rotating viewing window Oil and emulsion mist separator Measuring and monitoring systems: Renishaw OMP60 measuring probe Tool breakage detection TRS2 3D quickSET preparation Process monitoring operating mode 4 Fpedpfx Ajzhit Hod Iei Electronic handwheel Signal light, four-color DMG MORI Messenger DMG MORI Netservice Client Automation / preparation: Preparation for EROWA handling system M65 interface Extended M65 interface for EROWA Job Management System Operating hours according to current geometry protocol: approx. 47,589 h Spindle hours according to current geometry protocol: approx. 28,638 h Current geometry protocol dated 08.12.2025 available. The machine's geometry is in very good condition. All documented measured values are within the permissible tolerances. Particularly noteworthy are the very good parallelism values of 0.003 mm and 0.004 mm, as well as the very good roundness values of the vertical spindle of 0.002 mm and 0.008 mm. The squareness of the vertical spindle is also within the permissible specifications, at 0.003 mm and 0.014 mm. The machine is equipped with high-quality components and is ideal for precise 5-axis machining, tool and mold making, as well as demanding single-part and series production. Sale subject to prior sale. Technical data without guarantee. Inspection possible by arrangement.

Condition: used, Year of construction: 1991, total length: 10,730 mm, total width: 1,600 mm, total height: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 0443848 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 625 - Swing over bed [mm]: 1250 - Carriage turning diameter [mm]: 1100 - Distance between centres [mm]: 8000 - Bed width [mm]: 800 - Spindle bore [mm]: 1100 - Min. spindle speed [rpm]: 1.8 - Max. spindle speed [rpm]: 355 - Options: Fixed steady, Four-jaw chuck, Three-jaw chuck - Transport dimensions: 10730mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information Fodpsy E Imvjfx Ad Iopi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, 1 used, very well-maintained crankshaft milling attachment for mounting, e.g., on a lathe for milling crankshafts or other milling operations. Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of Manufacture: 2005 Technical Data: Spindle mounting: ISO 50, Runout / Test mandrel L=300 mm = 0.01 mm Speed range, continuously variable: Currently set to 2,000 rpm Spindle is designed for: Up to 3,000 rpm Drive power: Currently 15 kW The milling spindle is designed for: Up to 25 kW Bearing diameter: 110 mm The 2 bolted adapter plates under the milling spindle are each bolted on. These plates can be used for your lathe, modified, or may need to be newly manufactured. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the flat support of your lathe • Continuously variable speed adjustment, frequency inverter manufacturer LENZE, designed for up to 30 kW • Right / Left rotation • Lifetime-lubricated spindle bearings • Stable construction with hardened and ground spindle • High precision • 2-fold supported spindle with 5 spindle bearings • Workpiece clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Indexing gear for the main spindle: • A long drive rod is mounted in the spindle bore and connected to the gear • Continuously variable speed adjustment, frequency inverter manufacturer LENZE • Right / Left rotation • Jog operation, fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of supply! Siegfried Volz Werkzeugmaschinen Fodpfx Adeddziyj Ijpi Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2016, condition: excellent (used), Painting booth Fjdpjygum Refx Ad Iepi Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm

Condition: excellent (used), Year of construction: 2003, turning diameter over cross slide: 390 mm, turning length: 2,250 mm, turning diameter: 610 mm, spindle bore: 118 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 1,870 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 240 mm, Equipment: rotational speed infinitely variable, Siemens Sinumerik 840D control. CNC turning and milling center with main and counter spindle for efficient 4-axis complete machining of chuck, bar, or shaft parts. Fpedow Ngmhepfx Ad Iji

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Fpodpfx Ajvuk I Ned Ioi Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz

Condition: used, Year of construction: 1987, functionality: fully functional, turning diameter: 1,500 mm, spindle speed (min.): 9 rpm, spindle speed (max.): 27 rpm, The UBC 150 is a high-performance wheel turning machine specifically designed for the re-profiling of railway wheelsets without the need for disassembly. Manufactured by Rafamet Year of manufacture 1987 Max working diameter, mm 700-1500 Wheelset axle length minimum, mm 1640 Wheelset axle length maximum, mm 3000 Gauge of the wheelsets to be machined, mm 1435 Track width, mm 1435, 1524, 1676 Clamping diameter, mm 550-1350 Maximum tire width, mm 140 Spindle speeds, rpm 9 – 27 Feed speeds, mm/min 1,6 – 50 Total power required, kW 172 Machine dimensions, mm 8700 x 3600 x 3200 Machine weight, kg 59200 Fodoypbcwspfx Ad Iepi

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Fjdpjy Uxt Eefx Ad Iepi Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.