Eccentric Press - Single Column

WEINGARTEN NR 63

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen Psdetycdkopfx Adnord - current UVV test with braking time measurement

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t Prodpfx Adotqm Dmonjd dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg Prodpfx Ajw Ec A Eodnod - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Weight of machine approx.: 3,5 ton Prodpfow Tukvsx Adned Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min.

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm Psdpfx Asvut E Rsdnerd ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm Podpfjvut Npox Adnsrd ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: like new (used), Year of construction: 2017, functionality: fully functional, ram adjustment: 75 mm, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, stroke length: 150 mm, power: 5.5 kW (7.48 HP), input voltage: 220 V, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm Psdpfxou Haute Adnjrd total response time: 170ms voltage: 220v 50Hz 5.5kw machine weight: 5600 kg

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Pedpji A A Tbofx Adnsrd Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Year of construction: 1978, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,7 t dimensions (WxDxH) 1,3 x 2,0 x 2,65 m year of manufacture 1966 - modernized 1978 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Prsdpfjvzxn Dsx Adnsd with pneumatic clutch, mechanical overload protection in ram as is where is, partly dismantled, WITHOUT putting into operation Price for commissioning (in given condition) on request