Eccentric Press - Single Column

WEINGARTEN ARS 100

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm Psdpfx Aelp U Daealopl table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Ppodpfxow Ucyue Aalsl Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm stroke 8-140 mm no. of strokes 48 Hub/min Ppjdpfxelp U Sps Aalsl ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Ppodpert Uc Esfx Aalol Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: used, Year of construction: 2012, x-travel 1.035 mm Ppedew A Spvopfx Aalol y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Psdpjwcxlwsfx Aaljpl Technical data and equipment available upon request

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm Ppsdjvuuaispfx Aalol no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC Ppsdpfx Ajuv Eg Healel - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Podpst Hxamjfx Aalepl Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: used, Year of construction: 2001, Cast resin epoxy distribution transformer 630kVA manufactured by TESAR Italy, voltage ratio 10000 ( ± 2 x 2,5 %) /400V, Dyn5 or Dyn11 or Dyn1, IP23 or IP00, forced cooling AF, conductor Al/Al, temperature monitoring unit, functional,available 2 pcs. Pjdpfxoquwtxo Aalopl