Furniture door frame press (special size)

V. Grum-Schwensen MTP

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm Codpfx Amjd H Irfsasrf max. 1050 x 2,500 mm 2 heating rails

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment Csdpfxsyh Hwue Amajrf width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: new, plate thickness 0,8 mm Crjdpfoht R Hmex Amaof throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Credpfx Ajhgiuhomajf Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Crodpfx Amjfv H Edeajf Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw Codpfxohlp D Ne Amaorf The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Cedpfx Amexpn T Usaorf Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Credpfx Amjqgcdtoajf Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Crjdomidyispfx Amaof Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Year of construction: 2025, condition: new, Standard version with column Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Csdpfx Aegn Tzlemajrf Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and mounting template Grinding tools available as an option Request more information