Laser cutting machine

TRUMPF TruLaser 3530

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second Gbjdpfxeixl Tne Acwsk - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Gbodpfx Acjxayl Dowsk Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Gbjdpfx Acoxt Evnewjk Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm Gbedox Tiy Tspfx Acwek z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: good (used), Year of construction: 2000, table length . mm table width . mm burner heads . 2 total power requirement . kW Gbsdpfx Ajqn A Ryjcwok weight of the machine ca. 1478 KG

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control Gbodpfxjtgu Ixo Acwok 2 x A/U axis torsion compensation upgrade kit

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Gbodpfx Acovca Rcowjk Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Gbsdpfxotiwgie Acwok Ground level installation

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,430 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 2,900 mm, total length: 4,855 mm, total width: 2,945 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 1400 Machining Centre – Available at Short Notice The LAGUN L 1400 machining centre stands for high precision, robust construction, and cost-effective manufacturing. Ideal for single-part production as well as series production in mechanical engineering, tool and mould making, and contract manufacturing. Gedpehy Atfjfx Acwobk Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / lease purchase available ✔ Compact design with high stability ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust design, high dynamics, and long-lasting machine concepts. The machining centres impress with their reliability, easy maintenance, and low operating costs. Technical specifications: Control System: HEIDENHAIN TNC 7 CNC control + 16" TFT display HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Full enclosure with laterally opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide you with a customised offer.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Gbsdpjx Dlf Refx Acwsk Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe