Metal 3D printer

Trumpf, Assonic,Ruwac True Print 1000 G06

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Ljdoq R Tkwspfx Anujac Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace Ledjiryyaspfx Anujac - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Lasdpfx Anowugczjusc Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations Ledpfx Aom E I D Honusac tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Laodpfx Ansu Ebv Ajuec Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) Lajdpfxst Ac Efo Anusc B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Lasdoibikwopfx Anuoc Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Laodpfx Asvtftqonusc Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control Ledpfx Ansx Nkp Ijueac • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit • Curing Unit 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer. Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm. Lsdpjtvfwksfx Anusac Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in). Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail. True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production. Cloud connectivity for predictive and prompt service with 3D Connect.