Bench drilling machine

TOS VARNSDORF WH 10 CNC

Condition: used, X-axis travel: 1250 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Spindle extension (W): 710 mm B-axis: 360° Clamping table size: 1000x1120 mm Max. table load: 3000 kg Spindle taper: ISO 50 Spindle speed: 2500 rpm Main motor power: 20 kW Overall machine dimensions (LxWxH): 6130x3600x2750 mm Total machine weight: 12400 kg Control system: Heidenhain iTNC 530 Accessories: operator's cabin, machine enclosure, measuring probe TS 460, tool holders Godpfxjx Dz Rce Agbebg Spindle hours: 8500

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Gbsdpfxodyah So Agbog Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: as good as new (ex-display), Year of construction: 2025, TOS Varnsdorf WH 10 CNC Heidenhain TNC620 / Sinumerik ONE Work spindle diameter 100 / 105 mm Clamping taper ISO 50 Tool shank 69871 DIN Clamping adapter - screw TOS 4100793 Main motor power (S1/S6-40%) 22/34 kW Max. spindle speed 2500 / 3000 rev/min Max. torque of the spindle (S1/S6-40%) 2173/3250 Nm Table transverse travel X 1250 / 1800 mm Headstock vertical travel Y 1100 / 1250 mm Table longitudinal travel Z 1000 mm Spindle stroke W 630 mm Table clamping surface 1000x1100 / 1200x1400 mm Workpiece weight max. 3,000 / 4000 kg Feed range 4 – 6000 mm/min Gbsdpfx Ajpdrzzsgbeg Total power consumption 50 kVA Machine weight 13 000 kg Features mechanical side - hardened guide surfaces on all axes - Biplast-V lining for the guide ways counter surfaces - Geometric accuracy according to the accuracy protocol TOS Varnsdorf WH 10 - Sliding working spindle with diameter of 100 mm, spindle bearings - FAG, SKF - hydraulic tool clamping set 22kN - Ott-Jakob - Headstock with cooling circuit - reTOS Varnsdorf - Ball screws on the X, Y, Z and W axes - KSK Kurim - Rim and pinion for precise rotary table positioning - reTOS Varnsdorf - Hydraulic system (unit, pumps, hoses, fittings) - Baseco - Rotary table reinforcement controlled by CNC system - Central lubrication system controlled by CNC system - Tribotec - Telescopic covers (X and Z axes) Features electrical side - CNC control system iTNC 620 Heidenhain Gen3 - Servo-motors Siemens 1FKZ 100…(5 pcs.) - Spindle motor 1PH8135... - 22kW - Converter Heidenhain UM114D - Linear scales Heidenhain for X, Y and Z axes - Encoder Heidenhain ROD 480 for rotary table - Encoder Heidenhain TTR ERM for spindle - Oriental stop - Control cabinet from Ritall with cooling unit - Wiring and modern electrical components - End-limit switches Balluff - Rotational control panel - Workplace lighting Other - Electrical inspection report, technical documentation - Certificate of geometric accuracy WH 10 Tos Varnsdorf - spindle ball-bar test protocol, linear scales accuracy protocol - cooling of work space placed on spindle forehead (tank, pump, hoses) - working spindle support with brass bushings SP200 Tos Varnsdorf - Heidenhain Options nr. 8, 19 and 20 - Heidenhain HR510 handwheel - Heidenhain Linear scales upgrade to LC115 series for X, Y and Z axis

Condition: new, Year of construction: 2025, GSD Intern One of the best-selling and most popular conventional precision lathes Impressive thanks to: Sophisticated technology Highest accuracy Durability Proven ergonomics Minimal footprint And extensive accessories. Proven for decades in single-part and small-batch production, in trade and industry, training and continuing education, and tool and fixture construction. Distance between centers 650 mm Center height 160 mm Automatic handwheel disengagement Leadscrew and feed screw covers Main spindle brake Toolmaking precision according to DIN 8605 Pole-changing brake motor Headstock gearbox 16 fixed speed levels Numerical position display (option) LED machine light TECHNICAL DATA: WORKING AREA Center height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 650 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore 43 mm Spindle diameter in front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREADING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Gsdpfx Aewhzcpjgbsbg Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only available with additional change gears. This machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding the available options.

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Gjdpfovgxfysx Agbebg Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Godpfx Aotzyx Tsgbsbg Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: Gjderl R Dljpfx Agbobg - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis * Gbjdpfx Agjx Aq E Hjbsg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Gbjdew D Aynopfx Agbeg

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW Godpfx Ageu Nc Emobobg weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *