3D CNC CMM (tactile)
Profitech Technologies Innometrik Advanced 564

Name: Profitech Technologies Innometrik Advanced 564
Brand: Profitech Technologies
Price: 28500 EUR
Availability: InStock

ONO plus VAT

€28,500

Year of construction

2023

Condition

Ex-display machine

Location

Saarbrücken Germany

3D CNC CMM (tactile) Profitech Technologies Innometrik Advanced 564

Profitech Technologies Innometrik Advanced 564

Machine data

Machine type:: 3D CNC CMM (tactile)

Manufacturer:: Profitech Technologies

Model:: Innometrik Advanced 564

Year of construction:: 2023

Condition:: as good as new (ex-display)

Operating hours:: 31 h

Price & Location

ONO plus VAT

€28,500

Location:: An den Ziegelhütten 19-21, 66127 Saarbrücken, Deutschland

Call

Details about the offer

Listing ID:: A3801309

Reference number:: 21100001

Update:: 31.03.2026

Description

3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price)
Open Cable

Special features of the gantry design:
Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio.

The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine.

24 air bearings for smooth movement of the three axes.

High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs.

Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results,
Air filter and regulator.
Lodpfxodyah So Apvehg

Z-axis pneumatic counterweight system.

Granit table with thread inserts of size M10.

Passive vibration isolation pads

Technical specifications
Measurement paths: X: 500mm
Y: 600mm
Z: 400mm

Max workpiece weight: 250kg
Weight of the machine: 850kg
Dimensions over everything: 1290x1160x2350mm

Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4:
Volumetric probing deviation: MPEP = 2.2μm
Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm)

Environmental conditions:
Room temperature standard: 18-22 ° C
Operating temperature 10-35 ° C

Air Supply:
Minimum air pressure: 6bar
Air consumption: 90NI / min

Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Seller

Registered since: 2016

25 listings online

Call

Send inquiry

Telephone & Fax

+49 6898 ... show

Fax:

These listings may also fit your interest.

Listing

Multisensor CMM Hexagon Metrology Optiv 442 // PCDMIS (ex works)

Saarbrücken

18,716 km

Multisensor CMM
Hexagon MetrologyOptiv 442 // PCDMIS (ex works)

€40,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. Lhjdpfx Apsdyc Uasvjg · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

See details

Listing

Coordinate Measuring Machine Aberlink /Renishaw Azimuth

Wolkersdorf im Weinviertel

18,142 km

Coordinate Measuring Machine
Aberlink /RenishawAzimuth

€85,000

FCA Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, Measuring Range Lodpjdv I Abjfx Apvehg X – axis 1200 mm Y – axis 2000 mm Z – axis 1000 mm Accuracy acc. ISO 10360 E = [2,6 + 4L/1000]µm DCC controller Renishaw UCC S5 JS box Renishaw MCU-5 (wireless on demand) Temperature sensor Renishaw Probe system Renishaw REVO 5-axis scanning probe Probe changer Renishaw (price REVO system new appx. € 80.000,--) Application software Inspect3D Inca V6 avzula version built 2014, retrofit 2017 with Revo

See details

Listing

Tesa (Brown&Sharpe) XCEL Brown&Sharpe (Hexagon) XCEL 9129

Wolkersdorf im Weinviertel

18,142 km

Tesa (Brown&Sharpe) XCEL
Brown&Sharpe (Hexagon)XCEL 9129

€38,000

EXW ONO plus VAT

Call

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Lhedpfodpak Rox Apveg Option : Laserscanner (e.g. Kreon) Probe changer

See details

Listing

Vertical machining center DMG Deckel Maho DMC100H DMC100U DMC 125U Palette

Remscheid

18,548 km

Vertical machining center
DMG Deckel MahoDMC100H DMC100U DMC 125U Palette

Call

Listing

CNC vertical jig boring machine WMW MIKROMAT BKoZ 900x1400/5NC

Ensisheim

18,782 km

CNC vertical jig boring machine
WMW MIKROMATBKoZ 900x1400/5NC

Call

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Lodegy E Dpjpfx Apvjhg Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

See details

Listing

CNC automatic lathe TORNOS MultiSwiss 8x26

Bienne

18,826 km

CNC automatic lathe
TORNOSMultiSwiss 8x26

Call

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Lhedpexrfunefx Apvjg Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

See details

Listing

Round vibratory Vibra-Line B60M Pers Group Vibra - Line B60M

Vejle

18,069 km

Round vibratory Vibra-Line B60M
Pers GroupVibra - Line B60M

Call

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PG20240001, total height: 910 mm, overall weight: 110 kg, total length: 830 mm, total width: 830 mm, type of input current: three-phase, workpiece weight (max.): 45 kg, tank capacity: 60 l, usable tank capacity: 15 l, input voltage: 400 V, workpiece width (max.): 160 mm, workpiece height (max.): 160 mm, outer diameter: 160 mm, workpiece length (max.): 160 mm, inner dimension height: 245 mm, inner dimension width: 280 mm, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, warranty duration: 12 months, empty load weight: 110 kg, load capacity: 60 kg, Vibratory finishing machine for universal use for deburring and polishing. Suitable for small parts and series. Vibra-Line B60M circular vibrator with 60 l. Volume. The machine is coated with 20 mm. PU coating (polyurethane). With a capacity of 60 litres, the work bowl can hold up to 15 litres of workpieces and approx. 45 kg of sanding medium, depending on the design and size of the individual parts. The basic model of the ‘Vibra-Line B60M’ is equipped with a control cabinet with mechanical timer and process time control. Lhsdpfx Apevgagxevog

See details

Listing

Kanal

18,423 km

Band saw
MEPShark 332 nc evo

Call

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Lhsdpfxsul Svlo Apvjg Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

See details

Listing

Machining center Dörries Pegard Euromill 200

Overath

18,570 km

Machining center
Dörries PegardEuromill 200

Call

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Lhodpeqc Umgofx Apvsg Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Video available!

See details

Listing

Hexagon Optiv M 6.6.4 DUAL Z CMM Hexagon M 6.6.4 Dual Z

Saarbrücken

18,716 km

Hexagon Optiv M 6.6.4 DUAL Z CMM
HexagonM 6.6.4 Dual Z

Call

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Lodpfsncfd Rjx Apvohg Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

See details

Advertise here