Lathes

CITIZEN C32-VIII

Condition: used, Year of construction: 2005, CNC Mitsubishi Mieldas 635 LC Max. machining diameter Ø 32 mm (from Ø 10 mm) Max. machining length 320 mm for the chuck Max. front drilling diameter Ø 12 mm Max. front tapping diameter M 10, tap M 8 (die) Through-hole diameter of the spindle Ø36 mm Main spindle speed from 200 to 8,000 min¯¹ Main spindle speed change Continuous S + 4-digit numerical value Main spindle indexing 1° Main spindle C-axis 0.001° Max. diameter of the chuck Ø 32 mm of the rear spindle Max. workpiece length for pick-up 145 mm from the rear spindle Max. workpiece overhang length 25 mm of the rear spindle Max. drilling diameter in the Ø 10 mm rear machining process Max. tapping diameter in the M8 rear machining process Rear spindle speed from 200 to 7,000 min¯¹ Rear spindle speed change Continuous S + 4-digit numerical value Rear spindle indexing 1° Counter-spindle C-axis 0.001° Tool holder spindle Max. tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min¯¹ Continuous S + 4-digit numerical value Opposite tool holder Max. drilling diameter Ø 7 mm Max. tapping diameter M 6 Spindle speed from 200 to 4,500 min¯¹ Spindle speed change Continuous S + 4-digit numerical value Guide sleeve and chuck models Main spindle chuck MC081-M Guide sleeve FG531-M Rego type ER16/AR16 chuck Rear spindle chuck FC081-M-K Number of tools to be mounted Up to 18 tools + α Tool dimensions Tool (multiple tool holder) 16 x 169 x 130 mm Sleeve (opposite tool holder) Ø 25.4 mm Maximum diameter of the tool mounted in the rotating tool holder of the tool holder Drill and front milling cutter Ø 10 mm Rapid feed rate 20 m/min Minimum increment of movement X1 axis 0.001 mm Y1 axis 0.001 mm Z1 axis 0.001 mm X2 axis 0.001 mm Z2 axis 0.001 mm Z3 axis 0.001 mm Psdpfx Aoy Uvy Ajpdorc Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Bar length 2,500 mm Center height 1,132 mm IEMCA BOSS 332-E BAR FEEDER INCLUDED Machine complete with manuals and CE declaration of conformity. All technical data shown are indicative and may be subject to change without notice, and therefore should not be considered binding.

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Predpfszr Dd Uex Apdoc Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Prodpfx Aezlqdzopdsc Parts conveyor belt

Condition: good (used), Year of construction: 2008, CNC Swiss turn Machine type: Citizen C-32 VIII 2M8 Year: 2008 SPECIFICATIONS Main Spindle Max. turning length: 320 mm Turningdiameter: 32 mm Spindle speeds: 200 - 8.000 rpm Subspindle Spindle speeds: 200 - 7.000 rpm Driven Tools Equipment Bar loader magazine: FMB turbo 3-36 Podpfx Apjzim Evodsrc

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Prsdpfx Apjza E S Djdjc

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,850 kg, Citizen C32-VIII Year 2007 LNS Express 332 Bar Feeder Chip Conveyor Prodpfxjwanb Ne Apdjc Parts Conveyor - Available Now -

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Podpfxoyr Dmde Apdorc Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Psdpfxjw T Tcwj Apdsrc Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Prodjwpud Aepfx Apdec Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Prodpfx Astk It Sopdjc Stock no: 2002125BXACEO Subject to incorrect technical data presented