Double spindle 5 - axis machining center

SW Schwäbische Werkzeugmaschinen BAW 06 - 22

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Iodpfx Ajtgu Ixeffeik Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Iiedpjvdtzdsfx Affjk Year of manufacture: 1999 Retrofit 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: C98 control system with BP26_SE control panel VAST GOLD sensor system 13-position stylus change magazine Stylus change plate Stylus accessories Calibration sphere Reference probe Workstation with monitor Calypso Basic 5.2 software Upgrade to the current Calypso version and additional options possible Complete retrofit with C99 and the current Calypso version possible Available at short notice

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Iisdpoxt D Ezsfx Affsk Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Iisdpoxt D Ebjfx Affjk Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Iedpfxjvcyf Ts Affjik Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: without Iedpfxjttzxrj Affjik Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Iedpfx Aferl Svrofeik

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€ Iodpfx Afsbvk I Eefsik

Condition: like new (used), Year of construction: 2011, functionality: fully functional, spindle motor power: 15,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 157 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 464 mm, rotational speed (max.): 6,000 rpm, total height: 1,885 mm, total length: 3,675 mm, total width: 2,258 mm, overall weight: 9,000 kg, CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464,8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Isdpfexiwnnjx Affoik Number of lower turrets: 1 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Part catcher Workarea light Bar Loader ILS - RBK Machine running time: Nominal Kva: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height mm: 1.885 Weight kg: 9.000

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 67027, Hersteller: ZAYER, Typ: GMCU 6000-AR, Baujahr: 2014, Serien-Nr.: 67027, 6-Achs, Tischoberflaeche: 7000*2500*300mm Breite zwischen den Standern: 3800mm Isdpfsw Iy Hlsx Affjik Verfahrwege (X/Y/Z): ca. 6000/4500/1250 mm, Werkzeugaufnahme SK50, 60-fach Werkzeugwechsler, Steuerpult HEIDENHAIN iTNC 530, Späneförderer TECNIMETAL, Kühlmittelanlage, Sicherheitsabsperrung mit Lichtschranken LENZE