Used Bourgault 6700 St for sale (14,796)

Condition: used, functionality: fully functional, power: 31.7 kW (43.10 HP), overall weight: 1,374 kg, operation weight: 1,374 kg, operating hours: 2,585 h, We offer this used Toro Reelmaster 6700-D all-wheel drive mower. Ljdpfsy Ib R Tex Ah Ejac Operating hours: 2,585 h VAT can be stated separately. Rated power: 31.7 kW Rated speed: 3,000 rpm Operating weight: 1,374 kg Sound power level: 105 dB Serial number: 313000123 Country of origin: USA No guarantee or warranty. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2015, Steering skate length:630mm Steering skate width:220mm Steering skate hight:115mm Laodpfx Aowvhpfeh Eoc Skate length: 630mm Skate width: 220mm Skate hight: 115mm Max. loading capacity:12T Wheel Ø: 85mm Wheel material: steel Hydraulic jacks: 2 Lifting range of foot:30 - 260mm Lifting range of head:420 - 650mm

Condition: good (used), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 15,540 mm Number of bays per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 600 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Type: H Profile dimensions: 90 x 75 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack crossbars, used Material color: sendzimir galvanized I-profile: 120 x 50 mm Beam type: SLI120/14 Agraffe: 5 HK Clear width: 3,000 mm 40x locking pin, used Material color: sendzimir galvanized To secure the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, Laodpfxjruqfas Ah Esc manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Technical data for the shelf rack upright: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x shelf rack upright, new goods Material color: sendzimir galvanized profile dim.: approx. 60 x 30 mm Incl. bulkhead and base plates The uprights are unassembled 2.490 mm high 500 mm deep Remark: The shelving uprights are supplied unassembled when ordered unassembled when ordered. For an extra charge of 7,50 € / piece plus VAT we can also preassemble the also pre-assemble the uprights. Your contact person in our company: Lajdjpbwahepfx Ah Esc Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Technical data for the pallet rack upright: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x Pallet rack upright, used Material color: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates Ljdpjk Uuv Sofx Ah Eoac The uprights are pre-assembled (bolted frame) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for pick-up only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, type of input current: three-phase, product height (max.): 650 mm, product length (max.): 3,000 mm, product width (max.): 1,350 mm, overall weight: 2,300 kg, input frequency: 50 Hz, nominal power: 59 kW (80.22 HP), temperature: 220 °C, pass-through width: 1,400 mm, Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Lasdpfsxt Idbox Ah Eoc Width: 2350 mm Height: 1850 mm

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder Lajdpfoxvitvox Ah Esc manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: like new (used), 🧰 Product features Manufacturer: UTZ Condition: as new Material: High-quality polypropylene (PP) Color: black Laedpfx Ajwaa Nfeh Esc External dimensions: 350 × 210 × 145 mm Internal dimensions: 305 × 180 × 134 mm Volume: 7 liters Weight: 0.66 kg Special features: Euro norm, stackable, ESD - conductive 💰 Price € 5,- net excl. VAT Bulk discount: on request Shipping costs: Europe-wide upon request Delivery time: Available immediately Inspection and collection: possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers always in stock (Subject to technical modifications, errors and prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: like new (used), 2,500 m² storage racking system, Schäfer R3000, 2-3 levels Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly 2-3 levels Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and readily available. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information available on request. Ledpfx Ahjfiqhls Eoac We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Purchase/Sale: We are continuously looking for or offering numerous items from various areas: complete liquidation of business premises business closures fast, flexible, and efficient! We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, Lodpfxoy Ex T To Ah Eoac 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Lasdpfxoqt Dmye Ah Eoc Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, 🧰 Product features • Condition: new • Color: black • Volume: 43.7 l • Load capacity: 20 kg • Weight: 1.2 kg • Length: 60 cm • Width: 40 cm • Height: 22 cm • Stackable: Yes • Dimensionally stable: Yes • 40 units per pallet 💰 Price €15,- net, excluding VAT 💰 Price from 40 units €12.90 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock Lasdsk Shvuopfx Ah Eoc (Changes and errors in technical data, specifications, and prices, as well as prior sale, are subject to change! See our general terms and conditions, all prices excluding VAT, ex warehouse.)

Condition: like new (used), 3,000 pcs. insert mesh panels with pallet stop, as new 🧰 Product features • Condition: as new • Colour: galvanized • Dimensions: 930 x 1170 mm • Mesh size: 45 x 95 mm Laodsxhc Rxopfx Ah Ejc • Load capacity: 200 kg per mesh panel • Inner clearance: 99 cm • Outer clearance: 110 cm • Features: with pallet stop 💰 Price: €9.90 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our Terms and Conditions. All prices excl. VAT ex stock.)

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, electrical fuse: 16 A, input voltage: 400 V, year of last overhaul: 2025, Dough divider for bread dough weights from 250 to 1,650 grams. Completely overhauled with a revised dough chamber. Capacity: 960 pcs/hour or 16 pieces per minute. Ljdpfxox Ahm Uo Ah Eeac

Condition: excellent (used), BLB GmbH, supplier of new and used warehouse technology. You can obtain shelving systems, industrial trucks, accessories and other warehouse inventory from us. In this ad you buy as follows: Used pallet racking / Manufacturer Meta Plug-in system with pre-assembled frame, very quick assembly Positioning : 10 x rack bays with 4 x pairs of beams per bay Bay width 2700mm / beams 120 x 50mm / color black Quantity scaffolding 11 pieces Frame height approx. 7,500mm / depth 1100mm / painted black / pre-assembled 80 pcs. cross beams 120 x 50mm, painted black, incl. safety pins The display is available 2 x ! MORE - SMALL QUANTITIES POSSIBLE ! PLEASE ASK FOR YOUR DESIRED QUANTITIES Further accessories available for an extra charge ground anchor Impact protection Lasdpfx Aop I E Taoh Eoc Crash barrier Wire mesh Net price: 2950€. ex warehouse Weißenhorn, invoice with VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please ask for your transport costs.sale of used goods without guarantee & warranty. Errors / prior sale of used goods expressly reserved.

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lodpfx Asvb T Ewoh Ejac

Condition: new, empty load weight: 8,050 kg, maximum load weight: 36,950 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, FIRE-galvanized, reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,180 mm, length low bed approx. 9,400 mm, loading height approx. 900 mm, front wall approx. 1,600 mm high, 14 x stanchion pockets in outer frame, 3 x cross stanchion rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for, aluminum ramps = price: 1.900 ¤, , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Ledpfx Ahjzf H Trj Esac

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Ledpfju Uvv Tsx Ah Eeac

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including the slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, front wall approximately 800 mm high, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 4,200 mm long (2-part), hydraulic adjustment of the ramps, ramps for driving over on the gooseneck. -- Subject to printing errors, errors and changes, sample images --. More data available at: ! Ledpfx Aezfgxneh Eoac

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load manometer for axle load, length of the upper bed approx. 4,400 mm including slope, length of the lower bed approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, front wall approx. 800 mm high, 16 x rafter pockets in the outer frame, 32 x lashing eyes, ramp approx. 3,100 mm long, ramps for driving over on the gooseneck, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Lasdpozd T Efsfx Ah Esc

Condition: new, empty load weight: 7,950 kg, maximum load weight: 37,050 kg, overall weight: 45,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-sprung with lift axle, axle load gauge for axle load, length high bed approx. 4,140 mm, length low bed approx. 8,600 mm, loading height approx. 900 mm, for 2-axle and 3-axle tractor unit, front wall approx. 1,600 mm high, 18 x stake pockets in outer frame, 3 x cross stake rails, 24 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO container or 1 x 40 ft ISO container, , Surcharge for aluminum ramps, Price: 1,900 ¤, , Spare wheel, Price: 300 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Ledpfx Ahezd Dqro Ejac

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 219 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Ledpfjh Ucrbox Ah Eoac On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 345 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, That’s a double-productive CNC laser machine. There's no magic, just two laser heads. It has a through table, allowing you to cut materials and rolls of fabric of any length. This model also has a waste collection container that will make the work much more pleasing. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100-120W laser tube, making it possible to work at fast rates. Wattsan 1610 works with wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. You can give our managers a call for additional details! Wattsan 1610 Duos ST characteristics Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1600 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1750 x 810 mm Weight: 457 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Ledpfx Ajrzrg Deh Eoac Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 252 kg, table length: 1,600 mm, table width: 1,000 mm, Equipment: documentation/manual, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 ST characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Weight: 442 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Laodpfx Ajry Ub Rjh Eec YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 80 kW (108.77 HP), number of axes: 2, overall weight: 172 kg, table length: 900 mm, table width: 600 mm, Equipment: CE marking, documentation/manual, A mid-sized CNC laser machine designed to work continuously for small, medium, or large production. It has a through table, allowing you to cut materials and rolls of fabric of any length. A Wattsan laser cutter will be an essential assistant for your business. Effective and fast. Wattsan 6090 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model contains a function that allows you to remove the front wall and use the opened space to cut sheets and rolls of material. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 6090 ST characteristics: Working area: 600x900 mm Laser power: 90-100 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Lsdpoh R Iy Rjfx Ah Esac Machine size: 1030 x 1490 x 670 mm + if it is on wheels 315 mm Packing size: 1110 x 1580 x 755 mm Weight: 230 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.