Vertical machining center

Spinner VC560

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded. Godpfxoy U Hw Es Ad Iobp

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW Gbsdpjt Hw H Eefx Ad Iop weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment Godpfx Adsykt T De Ijbp • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm Gedjx D E Hnopfx Ad Iebp • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Gsdpfx Aewt Th Ijd Iobp

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Gbedpjucfwpjfx Ad Ijp

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 Gjdpfsu Hl R Tox Ad Isbp travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: reconditioned (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Siemens, controller model: 840D, rotary table diameter: 800 mm, spindle speed (max.): 14,000 rpm, coolant supply: 20 bar, input voltage: 400 V, DMU 70 3+2 axes Gsdpfjyx Am Rsx Ad Iebp The machine is currently being overhauled. New spindle New Y & Z axis guides Bellows Inspection windows Measured with BallBar incl. protocol Siemens 840D with Shopmill - handwheel 14,000 rpm SK40 spindle 30-position tool changer Internal coolant 20 bar Tank system with band filter 600 l Chip conveyor Cabin roof Measuring probe Rinse gun Operating mode 4 Documentation Available from 04/2026

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Tool holder SK 40 Internal coolant 35 kVA approx. 7550 kg Comprehensive tool package available separately Gbedpfx Adowtdzrj Isp

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31t- Model B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Gbjdpfx Aox D H Sfjd Isp Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm