Used Spinner Vc560 for sale (118)

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Pedpfey U Hw Eox Amkjpt Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 410 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece length (max.): 650 mm, workpiece width (max.): 450 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 250 kg, total height: 2,500 mm, total length: 2,000 mm, total width: 3,000 mm, table width: 450 mm, table length: 650 mm, table load: 250 kg, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, tool length: 200 mm, tool diameter: 77 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, This machine was not manufactured for mass production. Accuracy: +-0.015 mm. It has been regularly maintained, both electronically and mechanically; for example, it received new ball screws and linear guides two years ago. Ppedey Tv Nnepfx Amkjt Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be inspected while in operation until then).

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed Pjdpfxeykt T De Amkjpt • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is a high-quality CNC turning and milling center, a Spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Psdpfx Aey Uwmwomkopt Counter spindle Powered tools Chip conveyor Extensive tool package Technical data: Bar diameter 77 mm 12-position VDI50 turret Main spindle ASA 8 Counter spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and counter spindle Weight approx. 6000–7000 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • X-axis travel: approx. 360 mm • Z-axis travel: approx. 980 mm • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A8 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes Podpfxjyv Epve Amkspt • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2013, operating hours: 23,758 h, functionality: fully functional, machine/vehicle number: AZ 0170, Very well-maintained and in good condition: CNC lathe SPINNER TC 300-52 SMCY ● Delivery terms: Ex works, loaded onto a truck ● Location: 57562 Herdorf ● Availability: Immediately, by arrangement. The exact collection date will be agreed upon and finalized. Our dismantling team will carry out the loading on site on that day. Please note that the date cannot be changed after it has been set. ● Payment terms: Advance payment - by bank transfer ● Internal No.: TM1 ● Can be inspected while powered on: Yes Technical data: Working area: Max. swing diameter: approx. 300 mm Max. turning length: approx. 250 / 200 mm Max. turning diameter: approx. 400 mm Travel ranges: Travel range X/Z: 180 / -400 mm Travel range Y: +40 / -40 mm Max. rapid traverse rate X/Z: 15 / 24 m/min TURRET 1: Max. speed: 5000 rpm Chuck size: 210 mm Spindle bore: 52 mm Spindle power: 15 / 19 kW (Siemens + Fanuc) Torque: 96 / 121 Nm (Siemens + Fanuc) TURRET 2: Max. speed: 7000 rpm Chuck size: 130 mm Spindle power: 6 / 8 kW Torque: 38 / 60 Nm TURRET: Number of tools: 12 Tool holder: VDI 25 Rotating tools: 12 Max. speed: 6000 rpm Power: 3 / 4.6 kW (Siemens) 1 / 1.50 kW (Fanuc) Torque: 9.75 / 14.75 Nm (Siemens) 7 / 31.8 Nm (Fanuc) Scope of delivery: ● Existing manuals/documentation ● Collet chuck (2 pieces, for main and counter spindle) ● Various collets and tool holders, consisting of: Collets type 364 E W25 80-5 from Ø 3–22 mm (in 0.5 mm increments) 2 × combination holders (internal and external cooling), type EWS 17.2525TDX 105 3 × collet holder EWS 31.2525 DTDX105 2 × Garant double holder, axial Attention: ● The tool holders visible on the machine in the turret are not included in the scope of delivery! Dimensions & Weights: Ppedey E Rx Ispfx Amkjt ● Footprint L x W x H approx.: 2000 × 1600 × 2000 mm ● Weight approx.: 3500 kg Note: At the end you will find some pictures of the bar feeder. This is not included in the scope of delivery and can be purchased separately upon request and by arrangement. Additional information: ►If desired, we can offer transport to the destination ►The quoted price is net plus VAT ►The goods are sold excluding any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 89697, We are selling our Spinner CNC lathe due to relocation. The machine is in good condition and fully operational, except for the handling system. You are welcome to inspect the machine on-site and see its functionality for yourself. We offer ex works (EXW) delivery terms only. A large loading ramp and loading equipment are available at our premises. Ppjdpfoyzq Smjx Amkst

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 810 m/min, rapid traverse Y-axis: 610 m/min, rapid traverse Z-axis: 610 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810D, workpiece weight (max.): 1,000 kg, table load: 1,000 kg, rotational speed (min.): 8,000 rpm, rotational speed (max.): 8,000 rpm, overall weight: 5,000 kg, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, chip conveyor, rotational speed infinitely variable, The Spinner VC810 is a high-precision, German-made 3-axis CNC vertical machining center. Its rigid cast iron construction ensures stable and vibration-free machining. This reliable, European-made machine is specifically designed for complex milling and drilling operations in tool and machine manufacturing. It is used in custom manufacturing. Regularly maintained. The tool changer has one faulty spindle. Currently in production until the end of June 2026 (can be viewed in operation by prior arrangement). Net price. Ppsdpfsy Uvr Sex Amkot

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC Ppodotqmqhjpfx Amkjt - Turret completely overhauld

Condition: used, Year of construction: 1999, functionality: fully functional, Technical data: Manufacturer: Spinner Type: VC 810 Year of manufacture: 1999 Control system: Siemens 840D ShopMill Travel distances: X 810 mm, Y 600 mm, Z 510 mm Spindle Speed: 8,000 rpm Torque: 105/70 Nm Work table Dimensions L/W: 1,000 x 600 mm Table load: 1,000 kg Ppjdpfx Amoy Uhiieket Tooling Tool holder: SK40 Tool changer: 24-position Dimensions and weight Dimensions L/W/H: 2,900 mm x 2,300 mm x 2,600 mm Weight: 6,500 kg Spindle newly fitted with bearings. Coolant through spindle (IKZ) Handwheel

Condition: used, Year of construction: 2008, PALLETIZED MACHINING CENTER SPINNER ME - 650 S CNC FANUC 18i - MB YEAR: 2008 Pedpfjw Amd Ujx Amkopt PALLET WORK TABLE DIMENSIONS (1 - 2): 800 mm x 450 mm DISTANCE BETWEEN TABLE TOP AND SPINDLE NOSE: 200 - 600 mm TRAVELS: X: 650 mm Y: 450 mm Z: 460 mm SPINDLE INTERFACE: ISO 40 SPINDLE SPEED: 10,000 RPM COOLANT FILTRATION TANK, HIGH-PRESSURE SYSTEM THROUGH SPINDLE: 20 BAR POWER: 15 / 18.50 KW TOOL MAGAZINE: 30 POSITIONS CHIP CONVEYOR MACHINE IN EXCELLENT CONDITION COMPLETE WITH DOCUMENTATION

Condition: excellent (used), Year of construction: 2013, Spinner TC600-65MC cnc lathe with C-axis and driven tools Year: 2013 Technical details: Control SIEMENS 840D-SolutionLine Psdpoy Sv Egsfx Amkopt Spindle speed range: 4500 rpm Spindle motor power: 11 kW/ 16.5 kW Torque: main spindle (siemens, s6 40%) 301 Nm X-Axis Movement: 230 mm X-Axis Rapid Traverse: 15 m/min Z-Axis Movement: 740 mm Z-Axis Rapid Traverse: 24 m/min Center distance: approx. 600 mm Max turning diameter: 310 mm Workpiece diameter over bed: 425 mm Number of turrets: 1 Tool taper: DIN 69880/ VDI30 Number of turret stations: 12 Driven tool holder positions: 12 C-axis Speed of rotating tools: 6000 1/min Driven tool power: 6 kW Tailstock: Quill stroke: 120 mm Adjustment travel: 475 mm Machine dimensions: 2730x1500x1620mm Machine weight: 4500 kg Accessories/options: - hydraulic chuck with jaws - collet type chuck with collets - static tool holders - driven tool holders - Renishaw tool measuring arm - Swarf conveyor - High pressure coolant system - Bar feeder - Documentations

Condition: good (used), Year of construction: 2005, operating hours: 9,999 h, functionality: fully functional, SPINNER Werkzeugmaschinenfabrik GmbH Used CNC Lathe Model: SPINNER UP65 Year of manufacture: 2005 Control: Siemens Sinumerik 840 Main spindle + counter spindle Sauter turret with driven tools Pedpfx Amoy Sr Iqskjpt Operating hours: 80,412 h Accessories: 3 driven tools, 10 standard tools with holders, 8 empty holders CE certified Buffer battery last changed in March No chip conveyor Typical technical specifications of the SPINNER UP65: • Max. turning diameter: approx. 300–400 mm • Max. turning length: approx. 600–1,000 mm • Swing over bed: approx. 500–600 mm • Spindle bore: 65 mm main spindle • Main spindle speed: approx. 4,000–5,000 rpm • Counter spindle speed: up to approx. 6,000–7,000 rpm • Main spindle drive power: approx. 15–22 kW • Turret: Sauter tool turret with driven tools • Tool holder: typically VDI30 • Travel paths: X approx. 200–250 mm, Z approx. 600–1,000 mm • Rapid traverse: X approx. 20 m/min, Z approx. 24 m/min • Control: Siemens Sinumerik 840 • Machine weight: approx. 4,500–6,500 kg Chucks: • Main spindle: Ø160 with Ø81, through bore Ø60 • Counter spindle: Ø160 with Ø43

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant Ppjdpfx Amey Azclekst CNC: SIEMENS 840D with SHOP MILL 4+1 axes ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Internal coolant Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be viewed in operation until then). Net price. Ppodpfx Amoy T Nggsket

Condition: good (used), Year of construction: 2023, Spinner TC 600, Year of manufacture 2023, Fanuc 32 i TB control system, Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, Psdpfx Amsy Thmljkept 16-position turret, VDI 40, C-axis, Powered tool holders, 3-jaw chuck Ø 250 mm.

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. Psdpfx Ajy S Ttzomkspt In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: VT0479, VC850 travels: X850, Y510, Z510 mm High-performance milling spindle up to 12,000 rpm as a built-in hybrid spindle with direct drive, without belt Tool holder on spindle SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control with the following basic features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard In the latest generation of SIEMENS "SINUMERIK ONE" control - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL RECOGNITION - DXF reader Fully integrated 1-axis TILTING TABLE, centrally mounted in the working area on the table, with: - Pivoting cheek approx. 580mm long for 3-sided machining - Swivel range of the A-tilting axis is infinite - Counter bearing to support the rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for the use of the additional tank up to 22 bar HIGH-PRESSURE TANK 22 bar Additional compressed air on the spindle head Compressed air centrally through the milling spindle, alternatively to coolant nozzle in the working area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE Ppjdpey S Tpijfx Amkst universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way VALVE for workpiece clamping up to 200 bar hydraulically STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals is supplied in digital form on the control. Paper manuals available at an additional cost LIFTING LUGS for crane unloading, set consisting of 4 pcs. mandatory for crane transport STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW Ppjdpfx Amoy Ralnekjt weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, LOW operating hours! Spindle hours: 1,300 h Power-on hours: 10,700 h Control: SIEMENS 840D SL OPERATE Travel: X = 450, Y = 400, Z = 400 mm Table size: 770 x 410 mm Max. workpiece weight: 200 kg Tool changer magazine with 24 stations Tool holder: SK 40 Max. spindle speed: 15,000 rpm Ppedpfx Amey Ifmxekst

Condition: used, (CMZ TL20M) Spinner TS66LMC CNC lathe with C-axis FANUC 21i-TB with Manual Guide MAX. TURNING LENGTH: 600 mm LIVE TOOLS: Yes – 12 stations Main spindle specification: 12 kW, 4000 rpm, 46 Nm MAX. BAR DIAMETER: 66 mm Ppodpfx Amjy Ib A Ajkjt MAX. TURNING DIAMETER: 400 mm YEAR OF MANUFACTURE: 2006 Travel -X 240 mm, -Z 640 mm Equipment: 5 live tools (3/2), tailstock, tool presetter, parts catcher, chip conveyor. Very good condition.

Condition: good (used), Year of construction: 2010, turning length: 650 mm, turning diameter: 400 mm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, ATTENTION: LOCATION SALE IN 74219 MÖCKMÜHL!!! CNC Turning-Milling Center Spinner TC600 52MC Year of manufacture: 2010 Control system: Sinumerik 840D with ShopTurn Spindle speed: 0-4,000 rpm Drive power: 34 kW / 325 Nm Chuck size: 210 mm - SMW self-centering chuck Bar capacity: 52 mm Travel distances: X-axis: 275 mm Z-axis: 700 mm Speed of driven tools: 6,000 rpm Drive power: 12 kW Tool holder: VDI 30 Number of positions on the turret: 16 NC tailstock as Z2-axis Accessories: - Chip conveyor Podpfxjy N S Sws Amkopt - Renishaw tool measurement system (manual) - Coolant system - Extensive range of accessories included

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, !!!ATTENTION: ON-SITE SALE IN 74219 MÖCKMÜHL!!! CNC turning and milling center Spinner TC600 65MC Year of manufacture: 2015 Control system: Sinumerik 840D with ShopTurn Spindle speed: 0-4,000 rpm Drive power: 34 kW / 325 Nm Chuck size: 250 mm - SMW self-centering chuck Bar diameter: 65 mm Travel distances: X-axis: 275 mm Z-axis: 700 mm Spindle speed of driven tools: 6,000 rpm Drive power: 12 kW Pedpfey N Swgjx Amkspt Tool holder: VDI 30 Number of stations: 16 NC steady rest as a Z2-axis Accessories: - Chip conveyor - Renishaw tool measurement system (manual) - Coolant system - Extensive range of accessories included

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. The price of the machine is quoted as a net price. Pedjy Nxd Hopfx Amkspt If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Condition: used, Year of construction: 2009, Spinner VC 1460 vertical machining center Year: 2009 Control: Siemens 840D-SL Table length: 1620 mm Table width: 610 mm Podpfx Amjx Ew Hrskjpt X: 1460 mm Y: 610 mm Z: 500 mm Spindle taper: ISO40 Speed maximum: 12000 rpm Maximum table load: 800 kg Positions in tool magazine: 32 Machine weight: 9300 kg. Accessories/options: spindle cooler swarf conveyor tool holders vices documentations coolant tank through spindle coolant Under power in our warehouse!