Bed Type Milling Machine - Universal

SORALUCE TA-D-35A

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Ffodpfxjftuywo Afnjt Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Fodpfsxddvnjx Afneft Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm Fedpfxsu Nc Ems Afnjft table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *

Condition: used, Year of construction: 2010, longitudinal traverse (z-axis) 6870 mm cross movement. (x-axis) 920 mm centre distance 6500 mm swing diameter over slide rest 900 mm Control Siemens Sinumerik 840D tool taper CAPTO C8 7352 mm max. workpiece weight 9000 kg tools in tool magazin 72 total power requirement 145 kW weight of the machine ca. 47 t dimensions of the machine ca. 11 x 3,2 x 3,5 m Rotary spindle -Spindle diameter - 320 mm -Spindle bore - 245 mm Main drive: -Max. spindle speed - 1600 rpm -Max. torque at the spindle - 4472 Nm C-axis servo-controlled main spindle: -Max. speed - 20 rpm -Max. torque at the spindle - 3000 Nm -Holding torque of the disc brake - 6000 Nm Tailstock: Fodexzuvtspfx Afnjft -Quill diameter - 180 mm -Quill stroke - 200 mm -Quill force (adjustable) - 5400 to 40000 N Tool holder: -AC drive power - 30 kW -Max. spindle speed - 6000 rpm -Max. torque at the spindle - 315 Nm -Travel perpendicular to the X/Z plane (y-axis) - 500 mm [-200/+300]mm -Milling spindle diameter in the front bearing - 100 mm Equipment/accessories: -with internal coolant supply -chip conveyor -paper belt filter system -boring bar with device -measuring equipment -clamping sleeves -tool holders -spare parts -technical documentation

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Control: FANUC 18i-MB Travel paths X / Y / Z: 1'020 / 510 / 510 mm Feed X / Y / Z: 1 - 10'000 mm/min Rapid traverse X / Y / Z: 48'000 mm/min Table size W x D: 1'200 x 510 mm Spindle speed: 15'000 rpm Internal cooling: 20 bar Tool holder: BT 40 Tool changer: 48 places Weight: approx. 7,500 kg Dimensions W x D x H: about 3,100 x 2,200 x 2,900 Meter Hours: Spindelhours: 9'310 Ffedpotz T Smofx Afnjt Accessories: RENISHAW tool measurement type: OMP 40, coolant tank, machine manual, machine light, chip conveyor

Condition: good (used), Year of construction: 2002, Machine is in good condition. Parts shown by hand not come. Fedpfx Astwpamsfnsft

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Ffjdjr Ddurjpfx Afnet Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Fsdpfxew Eb Itj Afnjft Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: used, Smoke chamber Bastra for 1 trolley Electric heating 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without after-burning system Installation dimensions of machine in cm : Width : 175 Lenght :120 Fodpfoh Hfc Sjx Afnjft Height : 210 Trolley dimensions in cm : 100*100*200 height Price for a generally refurbished machine: 14.000 EUR Delivery time: 30 working days after advanced payment

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW Fodpjx Eivpefx Afneft ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg