Profile bending machine

Sahinler HPK 100

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 34200 € 653.22 € 100 mm 315 mm 3 Dedpfxeynmrzj Aa Ejcd 7.5 kW 7 m/min 100x20 mm / 800 mm; 30x10 200x30 mm / 1.200 mm; 160 60x60 mm / 750 mm; 15x15 Ø 75 mm / 800 mm; Ø 15 mm Ø 125x2,5 mm / 1.400 mm; 100x40x4 mm / 1.300 mm; 2 80x80x5 mm / 1.500 mm; 25 100x100x12 mm / 1.000 mm; 100x100x10 mm / 1.000 mm; UPN 180 / 900 mm; UPN 30 UPN 180 / 1.000 mm; UPN 3 IPN 180 / 1.000 mm; IPN 8 1465 mm 2000 mm 1700 mm 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES!

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Djdpfx Aajh A Sfde Escd Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground Dsdpoh Alicsfx Aa Escd - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Dedpegulr Hjfx Aa Eocd Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Dodpsmx Rrlofx Aa Escd Typ: Palatino 1530 Baujahr: 2012

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Dsdpeiffwqofx Aa Eecd Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: as good as new (ex-display), Centrifugal pump Alfa-Laval FM-1A Material: stainless steel, medium: fruit concentrate/fruit juice, Dsdpfjhryyhex Aa Escd flow rate 20.000 l/h, delivery head approx. 25m, power approx. 3 kW, speed approx. 2.900 1/min, inlet/outlet DN50 1 VA-tank, vertical, cylindrical, closed 1 VA-subframe for pump and tank

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder Dcedpfx Aast Ea Tfj Esd - 2-layer machining

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Dedpfxjhv U U Do Aa Escd The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm Dcedpfx Aaoq D Dzlj Eed R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -