SOMERTEKNO KLIPKLASIK 1000

SOMERTEKNO KLIPKLASIK 1000

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Rodpfohrnbksx Ahvop Without control cabinet!

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm Rodpfsbh Ubwox Ahvep strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): Redpfxjxz Tuue Ahvsp 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides Rsdpsiqp Erjfx Ahvop - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: new, The Servoturn 500/2000, a remarkable addition to the category of Conventional Horizontal Lathes, excels within the Servo-conventional Lathes group. This KNUTH machine combines cutting-edge feed technology with robust mechanical engineering, featuring ball screw drives and electronic hand wheels on all axes, ensuring precision and efficiency typically found in modern CNC machines. Users will appreciate the ease of selecting feed and thread pitches electronically without the need for gear changes. The Servoturn boasts a heavy ribbed machine bed and high-quality servo drives, allowing for a stable and dynamic operation. With a turning diameter over the bed of 500 mm and a center width of 1,950 mm, it accommodates various machining tasks. Standard equipment includes a quick-change tool holder set, an electronic hand-wheel system, and a coolant system, further enhancing its versatility. If you’re ready to upgrade to a robust and precise machine, you can request a quote for the Servoturn 500/2000 in the Servo-conventional Lathes category today. Rsdpsl Iy Sxofx Ahvjp

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm strip thickness: 0,4 - 3 mm coil weight: 10 t Rsdpsdn I Hrjfx Ahvop interchangeable mandrels, Ø: 304/406/610 mm

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm weight approx. 7000 kg coil weight : 6000 kg: Rodpfjhhyzcjx Ahvep Coil width 1250 mm Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Redpswi Iywsfx Ahvep Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Rjdpfsu Ic Avjx Ahvsp Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. 4) Documentation. Rjderyu Tajpfx Ahvop