PANEL SAW with REAR LIFTING TABLE

SCHELLING FH 6 (430 / 220)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Nedpfx Aoflc Uhobgjdd Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height Ndsdpfx Absqprk Tegod - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Njdpfx Ajtq U A Ijbgsdd

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario Ndedpew Rc H Hsfx Abgod - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Nsdpfx Aed Nuu Hebgjdd Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) servo Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Ndedpfxoxfh Tms Abgsd Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), Year of construction: 2019, operating hours: 278 h, Max. Workpiece Size for Peripheral Milling: X = 3,620 mm Maximum Travel Distances: X = 3,865 mm Minimum Room Height: 3.20 m Machining in Y and Z Y = 1,600 mm; Maximum Panel Width 2,000 mm Maximum Workpiece Height 300 mm Measured from the top edge of the vacuum suction cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured via USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE – HIGH-SPEED MILLING Control Siemens industrial PC control Handheld remote control unit for machine operation MILLING HEAD 5-axis head 7840, Power: 12 kW n(max) = 0 - 24,000 rpm, steplessly adjustable Cardanic; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holding fixture Max. Tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing the standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, including saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X, 6 in Y direction, 32 mm pitch n(max) 1,000 - 5,710 rpm steplessly adjustable 6 horizontal spindles 2 double drilling spindles in X 1 double drilling spindle in Y Ndedpfx Abexfaf Uogjd Including saw unit Integrated saw unit for sawing / grooving in X direction n(max) 1,000 - 7,330 rpm steplessly adjustable MACHINE TABLE Machine table with 6 consoles, pneumatically clamped, adjustable in X direction Display and positioning of consoles and suction cups via software program 2 lateral stops at field A and D, 2 large buttons for clamping and releasing workpieces, 2 tape-measure position displays for console positioning in X relative to stop at field A/D, tape-measure positioning for suction cups at each console in Y relative to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy workpieces TOOL CHANGERS Tool changer 7996, 18-position magazine (carousel), automatically moves in X-axis direction Moving tool changer 7886, 1-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatically operated Max. Tool diameter: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED lighting for the machining area. SAFETY OPTIONS Safety enclosure according to CE standards Protective fencing on the side and rear EQUIPMENT VARIANTS AND ACCESSORIES – LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Each module can simultaneously control up to 5 frame clamping elements. Simultaneous opening/closing of connected frame clamping elements, including foot pedal for operation, max. 2 modules per field A and field D available; OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum suction cups

Year of construction: 1997, condition: excellent (used), Window making machines WEINIG Nedpsiix Uvefx Abgjdd automatic tapping and slotting machine UNITEC 10, year 1997 profiling and milling machine UNIVAR 10, year 1997

Year of construction: 2021, condition: new, Directly available from stock List on request Ndedjica Amjpfx Abged 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Ndsdpswv Dfcofx Abgjd Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr