Edge banding machine

Holz-Her Perfect 1421

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Nsdpfx Asipvrbohvjku Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Njdpfehlp D Nex Ahvjku - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Nkjdpfx Aexcg Hgohvsu Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Nkedpjw Ix Alsfx Ahvou

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Nodpfxewka S Ij Ahvjku Location: Flörsheim

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Nsdpfoq Rfahox Ahvjku Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device 45 kw motor roller width 120 mm with electr. saw blade tensioning Nksdpfsfnh T Iex Ahvou the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension Nedpfx Ahork Tqkjvoku - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term Location: Solingen

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Nkedpfsvxlq Hsx Ahvsu Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot Nodjuhm Adspfx Ahveku - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Possibility to test at our facilities Machine visible in our Cosne workshop Price includes loading onto truck