SAMAG MFZ 2-2

SAMAG MFZ 2-2

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, overall weight: 22,000 kg, spindle speed (max.): 16,000 rpm, tool weight: 8,000 g, This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. • Tool storage • Type: Decagon • Number of storage locations: 100 (2x50) • Number of cassettes: 10 • Cassette locations: 10 • Cassette pitch: 90 mm • Max. cassette magazine speed: 8.3 min • Delay time from max. cassette magazine speed to standstill: 300 ms • Max. tool load mass: 280 kg • Max. tool weight (plastic collet): 6 kg • Max. tool weight (steel collet): 8 kg • Max. tool diameter with free adjacent locations: 160 mm • Rotation axis: 10x36 • Time to change from the nearest cassette (left/right): 1.5 s • Tool change on the spindle (avg. chip-to-chip without wheel rotation, VDI 2852): 4.5 s • Axes and travel paths • Travel paths: Y (vertical) working stroke 500 mm; Y (vertical) total stroke incl. tool change 775 mm • Axis acceleration (X/Y): 0.6 xg, 0.8 xg • Main spindle drive • Spindle unit: GMN high-frequency spindle HCS 220-16000/28 • Spindle spacing: 450 mm • Sleeve diameter: 220 mm • Spindle unit weight: 110 kg • Drive motor: 1FE1 083-4WN11-1BA2 • Torque (S1): 65 Nm • Torque (S2): 74 Nm • Workpiece carrier unit (W-axis swivel unit) • Swivel time 180°: 4.5 s • Faceplate/counterbearing diameter: 500/345 mm • Drive/counterbearing speed (max.): 15/20 min • Mass moment of inertia: 140 kgm² • Permissible tilting moment: 8000 Nm • Permissible tangential moment (drive/counterbearing): 10,000/5,000 Nm • Locking force of Hirth gearing at 100 bar (drive/counterbearing): 190/175 kN • Workpiece holder A1/A2 axis • Parting angle: 3 • Swivel time 180°: 3.5 s • Faceplate/counterbearing diameter: 345 mm • Speed (max.): 20 min • Mass moment of inertia: 20 kgm • Permissible tilting moment: 3,000 Nm • Permissible tangential torque (drive/counterbearing): 5,000 Nm • Mains voltage: 400 V • Frequency: 50 Hz • Control voltage: DC 24 V • Power rating: 72 kW Additional equipment • Cooling lubricant system (chip management) • Type: Scraper belt conveyor • Dimensions (L x W x H): 2885 x 1095 x 1830 mm • Discharge height: 1020 mm • Gap screen: 500 μm • Filling volume: 100 l • Wastewater pump: 380 l/min at 1.6 bar • Central cooling unit • Type: DK 160-V/SO Kedpfx Abezvvntjnedr • Cooling capacity: 1900 W • Min./Max. ambient temperature: 10/40 °C • Max. water outlet temperature: 20 °C • Condensation temperature: 40 °C • Refrigerant: R134a, 2 kg • Connected electrical power: 5.1 kW • Peripheral masses • Mass of clean water tank (empty): 930 kg • Mass of chip conveyor (empty): 450 kg • One slaughter machine (optional) • 3D data/CAD of the clamping tower (possibility for 3 clampings) (optional) • 2 replacement towers and spare parts package (optional) Dimensions Machine Depth 5500 mm

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment. Kdedpfx Ajzk U Hwsbnjr