Vertical machining center

Quaser MV154

Condition: good (used), Year of construction: 2003, TECHNICAL DATA Control FANUC OIMB Axes X: 760 mm Y: 530 mm Z: 560 mm Dimensions Lodpexqqy Hsfx Af Ejru L: 235 cm W: 200 cm H: 258 cm Weight: 5500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 52E0947, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC530, workpiece weight (max.): 500 kg, total height: 2,830 mm, total length: 2,470 mm, total width: 2,540 mm, table width: 500 mm, table length: 510 mm, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, Quaser MV154 Ljdpfxoxqf Hue Af Esru Heidenhain TNC 530 With 4-axis

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Heidenhain iTNC 530 control, Year of manufacture 2008, Travel X/Y/Z 1000/530/560 mm, 30-position tool changer, SK 40 tool holder, Blow air through the spindle, Internal coolant 20 bar, External coolant, Scraper belt chip conveyor, 3D probe, Lrjdpfow Uf Nfsx Af Esu Tsc Aldaswlffpsbsb infrared receiver, Temperature-controlled oil cooling system, Thermal compensation, Spindle replaced in 2021,

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Lredpfexlf D Nox Af Eju Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 BIG PLUS - Spindle power : 25 [kW] - Spindle speeds : 12000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 760/530/560 [mm] - Rapid traverses rates (X/Y/Z) : 6950/6950/11300 [Nm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 X 500 [mm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 8000 [h] Lodouhb Diepfx Af Eoru EQUIPMENT - CNC : Heidenhain iTNC 530 HCSI - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Rigid tapping - Coolant tank * with high-pressure pump : 20 [bars] * with paper filtering unit * with cooling unit for coolant * With washing gun - Coolant through spindle - Chips conveyor - Electric transformer

Condition: used, Year of construction: 2006, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: 18i-MB, table load: 500 kg, rotational speed (max.): 12,000 rpm, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Technical data: Make and Model: Quaser MV154 APC/P Lrjdpfx Afjwqguce Eju Year of manufacture: 2006 Control system: Fanuc 18i-MB Working range (XYZ): X-axis: 700 mm Y-axis: 500 mm Z-axis: 560 mm Table size: 500 x 510 mm Table load capacity: 500 kg Tool location: 48-position, automatic tool changer Tool taper: BBT40 Vertical axis speed: 12,000 rpm (max) Motion and speed parameters: X, Y, Z movements: 30 m/min Automatic pallet changer (APC/P): Versatile machining commands, such as 3D machining, bevels, milling, drilling and tapping Contact us! Also ask for a transportation quote for the machines!

Condition: used, Year of construction: 2008, x-travel 1020 mm y-travel 500 mm z-travel 500 mm table surface area 1200 x 500 mm spindle taper SK 40 spindle turning speed - stepless 40 - 12.000 U/min spindle drive 18,5 kW feeds 0 - 20.000 mm/min rapid traverse 40 m/min ATC 30 Pos control HEIDENHAIN, iTNC 530 total power requirement 30 kW weight of the machine ca. 6,85 t - with coolant through spindle Lrjdountnbopfx Af Eou Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant

Condition: good (used), Year of construction: 2008, operating hours: 10,180 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, TECHNICAL DETAILS Electrical specifications: Operating voltage: 400 V Frequency: 50 Hz Connection: 20 kVA Control system: Control: FANUC mill i Lrodou N If Eepfx Af Eeu Spindle: Max. Spindle speed: 12,000 rpm Traverse paths: X-axis travel: 1,020 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Rapid traverse: 40 m/min Table: Table dimensions: 1,200 x 500 mm Max. Load capacity: 500 kg Tool holder and tool change: Tool holder: BT40 Tool changer: 30-fold Machine data: Year of construction: 2008 Machine weight: 6,850 kg Dimensions (L/W/H): 2,470 x 2,540 x 2,750 mm Tool parameters: Normal tool - Max. Tool diameter: 88 mm Standard tool - Max. tool length: 280 mm Tool length: 280 mm Standard tool - Max. Tool weight: 7 kg Large tool - Max. Tool diameter: 125 mm Large tool - Max. Tool length: 280 mm Large tool - Max. Tool weight: 7 kg Tool change time: Tool change time (chip to chip): 5 s Cooling and handling systems: IKZ: Yes (8 bar) Electric handwheel: Yes Chip conveyor: Yes Operating hours: Switch-on hours: 42,230 h Spindle hours: 10,180 h The machines were only operated in a single shift and only approx. 50% of the time.

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Heidenhain iTNC 530 control, Year of manufacture 2008, X/Y/Z travel 1000/530/560 mm, 30-station tool changer, SK 40 tool holder, Through-spindle air blast, Lsdpfx Ajwlffpef Esru 20 bar internal coolant supply, External cooling, Scraper-belt chip conveyor, 3D measuring probe, Infrared receiver, Temperature-controlled oil cooling system, Thermocompensation, Spindle replacement 2021

Condition: excellent (used), Year of construction: 2015, Incl. chip conveyor Incl. inclined bed filter system Incl. zero-point clamping system Incl. 4th axis Rotamatik 120 Renewed: Spindle Motor with new bearings X-axis new ball screw Lrsdpfx Afeibat Is Eju New Däublin Offer on request