Floor type boring machine

Pama Speedram 2

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Iisdpfx Aovdtzdsffok Year of manufacture: 1999 Retrofit 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: C98 control system with BP26_SE control panel VAST GOLD sensor system 13-position stylus change magazine Stylus change plate Stylus accessories Calibration sphere Reference probe Workstation with monitor Calypso Basic 5.2 software Upgrade to the current Calypso version and additional options possible Complete retrofit with C99 and the current Calypso version possible Available at short notice

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Iijdpfx Ajxcgtgeffjk Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Iodpfx Afew I D Dusfjik

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 67027, Hersteller: ZAYER, Typ: GMCU 6000-AR, Baujahr: 2014, Iisdpfx Aew Iy Hloffek Serien-Nr.: 67027, 6-Achs, Tischoberflaeche: 7000*2500*300mm Breite zwischen den Standern: 3800mm Verfahrwege (X/Y/Z): ca. 6000/4500/1250 mm, Werkzeugaufnahme SK50, 60-fach Werkzeugwechsler, Steuerpult HEIDENHAIN iTNC 530, Späneförderer TECNIMETAL, Kühlmittelanlage, Sicherheitsabsperrung mit Lichtschranken LENZE

Condition: excellent (used), Year of construction: 2013, turning height: 2,150 mm, turning diameter: 2,000 mm, Swing diameter 2,000 mm, turning height 2,150 mm, X-axis 1,150 mm, rotary table diameter 1,800 mm, chip conveyor, 25-position tool changer, fleece filter cleaning system, Iiodpfx Ajw Edvysffok

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer Isdpfx Ajuhb D Aeffjik - Tool-holders

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, travel distance X-axis: 550 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, Machine Details Stock-No. 1105-04006 Type of machine: Vertical Machining Center Manufacturer: DMG MORI Model: M 1 Year of manufacture: 2020 Control type: CNC Stored at: HAGUENAU, FRANCE Iiodpjtpcnnsfx Affek Country of origin: Germany Availability: IMMEDIATE Shipping terms: EX WORKS Technical specifications: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm table size: 790 x 560 mm Spindle taper: ISO SK 40 Spindle speed range: 10,000 rpm Feed rates (longitudinal/cross/vertical): 1 - 30,000 mm/min Rapid traverse (longitudinal/cross/vertical): 30 m/min Number of tools in magazine: 20 Max. workpiece diameter at full tool load: 80 mm Workpiece diameter with 2 vacant positions: 140 mm Max. workpiece length: 300 mm Max. tool weight: 7 kg Max. table load: 600 kg Spindle drive: 9 / 11 kW CNC control: SIEMENS 828D Total connected load: 30 kVA Additional Information: CNC SIEMENS 828 D Only 1,800 spindle hours Very good condition Electronic handwheel Chip conveyor Tool setter

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Iisdpfxsh T Ulye Affok Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Iiodpohvml Ijfx Affjk Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz Iiodpfjhq Uigsx Affok