ONA KE500

ONA KE500

Condition: used, Year of construction: 2001, Technical details: Knsdpfjzd Sg Iex Anuec turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, functionality: fully functional, Year of construction: 2016, 🚀 GEDA 500 Z/ZP – OKOMITA DIZALICA / TRANSPORTNA PLATFORMA Rabljena, 2016. godina – potpuno servisirana u GEDA Njemačka - puno novih djelova! Jamstvo: ORIGINAL TVORNIČKO - 12 mjeseci 🏗️ ZA PRIJEVOZ LJUDI I MATERIJALA – PROFESIONALNO RJEŠENJE ZA GRADILIŠTA Knedpfx Asxvyi Uonujc GEDA 500 Z/ZP je dvostruko rješenje: može se koristiti kao dizalica za materijale ili kao transportna platforma za prijevoz osoba i tereta. Zahvaljujući dvostrukom upravljačkom sustavu, nudi maksimalnu fleksibilnost, sigurnost i brzinu rada. Brzina dizanja do 24 m/min u načinu za materijale i 12 m/min u načinu za prijevoz osoba omogućuje učinkovit i siguran rad i na najzahtjevnijim projektima. Kompaktna konstrukcija, prostrana platforma i mogućnost prilagodbe čine ovaj model idealan za montažu skela i rad na višekatnim objektima. ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z/ZP Godina proizvodnje: 2016. Jamstvo: 12 mjeseci (potpuno obnovljena i servisirana u GEDA Njemačka) Puno novih djelova Pogon: 3,0 / 6,1 kW / 400 V Visina dizanja (max): 100 m Nosivost: 850 kg (materijal) / 500 kg (osobe) Brzina dizanja: 24 m/min (materijal) / 12 m/min (osobe Dimenzije platforme: D 1,6 m × Š 1,4 m × V 1,1 m Mast sistem: GEDA UNI-X-MAST Stanje: tehnički i optički – ODLIČNO 🧰 PRIBOR ZA VISINU DIZANJA DO 25 m Pribor za veće visine na upit. Čelični stupovi 1,5 m – 17 kom Sidra za učvršćenje stupa – 6 kom Vodilice za kabel – 6 kom Kabel za visinu dizanja do 50m Sve dizalice su servisirane i obnovljene u Njemačkoj, spremne za rad i isporuku. +++UZ GEDA 500 Z/ZP IDE ORIGINAL TVORNIČKI KONTROLNI LIST ZA ISPRAVNOST DIZALICE+++ 💡 DODATNE INFORMACIJE ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat kvalitete i sigurnosti ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku ✅ Platforma zakretna 90° – lakši utovar i istovar ✅ Minimalni zahtjevi za prostor i brza montaža ✅ Različite verzije platforme – s vratima i preklopnim mehanizmima za prilagodbu svakom gradilištu 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene modele s jamstvom, u ponudi imamo i nove GEDA dizalice, transportne platforme i dodatke: Dizalice za materijal i osobe Okomite i kose građevinske liftove GEDA-STANDARD 200KG, COMFORT 250KG I FIXLIFT 250KG-2BRZINE DIZANJA Sve nove i rabljene obnovljenne GEDA dizalice dolaze s punim jamstvom proizvođača, dostupne za trenutnu isporuku uz podršku i servis u Hrvatskoj. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis i obnovu GEDA liftova, dizalica i kompletne opreme.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 170 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 5000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 7 POWER SUPPLY Ksdpfouha Tvex Anusnc - Supply voltage : 400 [V] - Total installed power : 11 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1640 x 1200 [mm] - Machine height : 1725 [mm] - Machine weight : 1950 [kg] MACHINE HOURS - Number of working hours : 21523 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Predisposition for barfeeder - Bar loader : fedek - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Ksdpfx Anjztz Hcjujnc

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe Ksdezclqlopfx Anujnc HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. Kjdpfx Aneyq S E Soujnc A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Kedjzna Twopfx Anujnc Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Knsdpfx Anszcmzxjusc Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total width: 2,710 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, For sale is a well-maintained Mitsubishi FA20 wire erosion machine. Knsdpfxezln Tgo Anuec

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Knjdpoy Egnxsfx Anuec Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)