Universal testing machine

ZwickRoell Zwicki Z2,5

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Lhsdpfx Absmdn Tre Aen Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. Ljdpfx Abeg Rn Efs Aehn All statements without guarantee. Without transport costs.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7600, Offer Number: D08L/7600 Machinetype: straightening and cutting machine Make: WAFIOS Type: RS40S Constr. year: 1980 diameter range: 4-10 mm cutting length: 3000 mm speed - meters/min: 130 Location: In our warehouse Lhedpfjwi S N Nsx Ab Ajn

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Lhjdpfx Aoxrukljb Asn

Year of construction: 2023, condition: excellent (used), 1 used universal testing machine / tensile testing machine / material testing machine Manufacturer: Zwick Roell Type: Retroline 50 KN Modernization/inspection by ZwickRoell: 01/2023 with testControl II measuring, control, and regulating electronics. Maximum testing force: 50 kN 2 × wedge-type specimen holders, ZwickRoell 8404R, 50 kN Specimen holder part no. 1006757 Flat specimens: 0–22 mm, depending on the set of jaws Round specimens: Ø 4–19 mm, depending on the set of jaws Opening width with jaws: 22 mm Connecting pin: Ø 36 mm Weight per specimen holder: approx. 11 kg suitable for static and cyclic tensile tests extensive original ZwickRoell documentation Lhedez Eyqnspfx Ab Aen inspection report available very well-maintained condition Application areas: Tensile tests and material testing on metals, plastics, and other materials; suitable for quality assurance, testing laboratories, research, development, and training.

Condition: used, Year of construction: 1961, functionality: fully functional, machine/vehicle number: D08L/7656, Offer Number: D08L/7656 Machinetype: straightening and cutting machine Info: double wire processing Make: BÜNDGENS Type: UD2 Constr. year: 1961 diameter range: 0,8-2 mm cutting length: 1000 mm speed - meters/min: 80 Location: In our warehouse Lhjdpfx Ajwi S H Iob Ajn

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Lhodpfx Aezt S Hmob Asn Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Lhedpswnhvvsfx Ab Ajn Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m Ljdpfot Hwpyex Ab Ashn

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Lhodpoy Uiyvofx Ab Aon Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.