Used Wenzel Lh 54 for sale (51)

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm Gjdet Hw S Iepfx Akyjbu daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Gsdpfx Aow H Auqskyjbu

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Gjdpfey Dcivsx Akysbu Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis Wenzel LH 54 CMM machine was manufactured in 2003. It features a measuring range of 500 mm in the X-axis, 1000 mm in the Y-axis, and 400 mm in the Z-axis. The machine includes a granite structure base, air bearing guideways, and a portal design, making it suitable for quality assurance and series production applications. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 54 CMM machine we have for sale. Contact us for further details. • Condition: completely checked and retrofitted; new software • Machine design: granite structure base; air bearing guideways; portal design • Applications: quality assurance; series production • Availability: currently powered and available for demonstration • Calibration/verification: factory calibration certificate available; determination of length measurement uncertainty, probing uncertainty, and repeatability range • Measuring range: maximum space diagonal 4660 mm • Measurement uncertainty: E0 = 2.5 + L/300 µm • Controls and software: controller WPC2040 Basic; installed software WM Quartis R2026-1 • Probe system: TP20; probe head PH10T; probe head interface PHC10-3 PLUS; probe interface PI200 Combi; joystick HT400 • Options and services: measurement program creation for customer parts available; optional upgrade with Renishaw SP25M probe system (additional hardware and service included with upgrade); additional software modules on request; custom accessories and fixturing systems available Godpjyxqfuefx Akyobu Additional equipment • PC system with Windows 11 (compliant with current Wenzel requirements) and WM Quartis R2026-1 installed • 2 × 24" TFT monitors (new) • Mouse and keyboard • Probe change rack MCR20 (unpopulated/empty) • 1 × TP20 Standard Force Module • Stylus kit M2

Condition: excellent (used), Year of construction: 2016, X-axis: 1,200 mm Y-axis: 2,000 mm Z-axis: 1,000 mm Weight: 8 tons Maximum workpiece weight: 2,750 kg Gbodpfx Akjz Rnckoyeu Probe head: PH 10 M Includes documentation.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 075440, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, The machine was overhauled in 2022! TECHNICAL DETAILS Measuring range, X-axis: 1,200 mm Measuring range, Y-axis: 2,500 mm Measuring range, Z-axis: 1,000 mm Accuracy MPE E: 2.6 + L/300 µm MACHINE DETAILS Machine height with extended damper: 3,485 mm Machine height without extended damper: 3,470 mm EQUIPMENT Gbjdpfx Akez Izdzeysu CNC control WPC, 3 axes Probing system Renishaw PH10M Scanning probe Renishaw SP25 Scanning kit 2 Probe stylus lengths: 50–100 mm Probe changing rack Renishaw FCR25 Number of probe changing slots: 3 Probe changing rack: not populated Ergonomic handheld control panel HT400 PC system with Windows 10 Professional TFT monitors: 2 × 24 inches WM QUARTIS CNC control geometry software, Version 2025 WM QUARTIS CNC free-form surface applications, Version 2025 WM QUARTIS CNC CAD import interface STEP, Version 2025 USB user dongle with software license Small probe stylus kit M3 Reference sphere PC and controller trolley with desk combination

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 650 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 500 mm, number of axes: 3, This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details. Technical Data Gbodpfx Akszt Nr Hoyou • Measuring Range (X × Y × Z): 650 × 750 × 500 mm • Accuracy Standard: DIN EN ISO 10360 • Accuracy Class: Premium • Temperature Range: 18 °C – 22 °C • Maximum Temperature Gradient: 1 K/h • Maximum Temperature Gradient: 1 K/m • Maximum Temperature Gradient: 2 K/day • Probe Head: Renishaw PH6M • Probe: Renishaw TP200 • Probe Module: Standard Force (SF) • Probe Interface: PI200-3 • Probe Ball Diameter: Ø 4 mm • Probe Extension: 50 mm • Probe Extension: 100 mm • Adapter: PAA1 • PFTU, MPE: 1.6 µm • E0, MPE: 1.6 + L/350 µm (L in mm) • E150, MPE: 1.6 + L/350 µm (L in mm) • R0, MPL: 1.6 µm • Standard Module • Stylus: 4 ×

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Godpfxsipq I Ij Akyjbu Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Gbsdsz Hw Elepfx Akyou Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Gsdpfx Akeu Ur Sqjyebu

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,750 kg, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,190 mm, total length: 3,477 mm, overall weight: 8,000 kg, input voltage: 230 V, table load: 2,750 kg, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | LH122010 Coordinate Measuring Machine Coordinate measuring machine with the latest Renishaw 5-axis technology, manufactured in 2017. Measuring range XYZ 1200 x 2000 x 1000 mm Dimensions: XYZ 2200 x 3350 x 3650 Max. workpiece weight: 2500 kg Measuring uncertainty MPE (E0) 2.2 + (L/350) in µm Equipment • Renishaw UCC S5 control, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single points and scanning incl. RSP2, 1x RSH175, 2 x RSH250 and RSP3-3 kit (3xSH) incl. all probe changers • Mode measuring software, current version with CAD import STEP incl. 1 year of software maintenance • PC system Windows 11 with 2 x 27 TFT monitors, NEW incl. height-adjustable desk • Control cabinet with the latest safety technology Original price in 2017 plus VAT: €234,890.00 Gjdpfx Akjz Hxxaeyjbu Optional service package of your choice: Price: €19,880.00 Transport to loading bay | Commissioning | Inspection | Accuracy acceptance test according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Gbodpfot Hw Nyex Akyju Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Godpjw H Au Refx Akyebu

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Gbsdpsw H Au Dsfx Akyou

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Gjdpfjw H Auwex Akyobu

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Gbodpsu T Rhzofx Akyju

Year of construction: 2016, condition: like new (used), Double-column CMM *Installation in a floor-level design Measuring range * X 6,000, Y 1,600, Z 2,500 [mm] * Overlap of the columns in Y = 100 mm Measurement uncertainty Single column: 25 + L/70, max. 60 [µm] at L = 6,000 mm Double column: 50 + L/70, max. 100 [µm] at L = 6,000 mm Dynamics 3D traverse speed 400 mm/sec 3D acceleration 1200 mm/sec² Probe system (per column) * Renishaw PH10M * Renishaw TP20 + 2 modules Control system (per column) * WENZEL WPC2040 (Pantec Eagle Pro) Wireless operating unit * Handheld operating unit HT400 Software * POLYWORKS * Alternative solutions possible Accessories * Calibration sphere holder - equipped with 3 spheres * Probe assortment * TP-20 modules * Computer, monitor, keyboard (per column) Supplier's services Gbsdpfxsh T U Dfs Akyju * Transport, commissioning, calibration, final acceptance Warranty * 12 months, starting from the date of acceptance

Condition: used, Year of construction: 2008, #: software: WM I QUARTIS (current version) Measuring range: 800x2,000x700 [mm] Measurement uncertainty: Eo = 2.3 + L/300 [μm] Max. component weight: 800 [kg] CAD interfaces: VDA, IGES, STEP Optional: CATIA, Pro-E, SolidWorks Further information: • Air bearings in all axes • CNC control for 3 axes WPC • Control geometry and free-form surface (current version) • PC system (NEW) • 2 x 24“ monitor (NEW) • Touch probe PH10M/TP200 • Reference sphere • Controller table Options: Additional software modules, probe changers, accessories and clamping systems available on request. Godpfx Akjh Nct Ajyebu Services: Installation • Commissioning and accuracy inspection • DAkkS calibration certificate as desired • Individual training • Packaging/transport/insurance

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 023116, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces, such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate that serves as a measuring table, with a laterally mounted guide system, enabling open loading from three sides. Technical Core Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary-tilt head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 µm+ (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery: Without PC Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Gbodszz Hywspfx Akyju Unobstructed Accessibility: Due to the lateral guidance of the horizontal arm, the measuring table is freely accessible, which facilitates the placement of heavy workpieces using a crane or forklift. Multi-Sensor Capability: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs on request!

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 971696, Technical Data Manufacturer: Wenzel Type: LH87 / CNC Year of Manufacture: 1997 Machine No.: 971696 Measuring Range X-axis: 800mm Y-axis: 1000mm Z-axis: 700mm Probing System Probing Head: PH10M Probing System Type: TP20 Control Panel: HT400 Control System: WPC 2010 The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!) Gbodpjd Sv D Nofx Akyou

Year of construction: 1995, condition: excellent (used), machine/vehicle number: LH951333, Technical Specifications Manufacturer: Wenzel Type: LH86 / CNC Year of Manufacture: 1995 Machine No.: LH951333 Measuring Range X-axis: 800 mm Y-axis: 1000 mm Z-axis: 600 mm Probing System Probe Head: PH10M Gbjdsd Hqyzopfx Akysu Probing System Type: TP20 Probing System No.: 438P68 Control Panel: HT400RC V2, Wireless Probe Head Controller: PHC 10 Control System: WPC 2040 Calibration Sphere: DIA 29.369 (Ideal for star probes) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: used, Year of construction: 2004, WENZEL SCM 500 Smart Coordinate Measuring Machine in well-maintained and fully functional condition. The machine features a robust and compact design, specifically engineered for flexible use directly in the production environment or inside the measuring room. Combined with high-precision guideways, this proven structure ensures excellent measuring accuracy, stability, and outstanding repeatability within a minimal footprint. The SCM 500 Smart is designed for reliable, fast deployment in quality assurance as well as near-line series production, delivering consistent measuring results even under demanding shop-floor conditions. Prior to delivery, the machine will be fully inspected and subjected to a test run by our service technicians in Remscheid to guarantee complete functionality. The system is currently powered up and can be inspected and demonstrated at any time. PC System & Operating System (Upgraded): The machine is already equipped with a modern, high-performance PC system running the latest Windows 11 operating system. The entire configuration meets the current requirements of WENZEL, has been comprehensively tested, and operates with absolute stability, ensuring the CMM is immediately ready for integration into your processes. Optional Services (Subject to Agreement): - Installation and commissioning of the measuring machine within NRW (North Rhine-Westphalia) - Generation of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Determination of probing uncertainty in accordance with DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training courses for the WM | Quartis measuring software - Contract programming for your components Additional Information: Upon request, the machine can be retrofitted with a suitable Renishaw probe system (e.g., PH10 or other upgrade options). The retrofit includes additional services as well as supplementary hardware components, which will adjust the purchase price accordingly. Further software modules, customizations, individual accessories, and clamping systems are available upon request – perfectly matched to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 450 Measuring range Z: 400 mm Measurement uncertainty: Eo = 8,0 + L/250 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2030 PC System: Windows 11 Probing system: TP20 Gjdpfx Akozkug Reyobu Probe head: PH6 Probe module: 1 × TP20 Standard Force Module Joystick: HT400 Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 2,605 mm, total width: 3,135 mm, total length: 3,055 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 1,050 kg, table load: 200 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 200 kg, Equipment: documentation/manual, type plate available, This WENZEL SF 55 coordinate measuring machine is a modern and highly precise solution for the dimensional inspection of mechanical parts. Built in 2021, it is equipped with a 5-axis Renishaw PH20 measuring head, WM Quartis software, and a temperature compensation system, offering high performance in testing and quality control operations. Key features: * Year of construction: 2021 * Measuring range: 500 × 500 × 500 mm * Measuring uncertainty MPEE: 1.8 + L/350 µm * 5-axis Renishaw PH20 measuring head with Head Touch technology * WM Quartis measuring software * Temperature compensation system Gsdpozrtm Sofx Akyobu * WPC 2040 control unit * Complete set of monitor, keyboard, and mouse * Reference sphere included Equipment: - Complete and ready-to-use measuring system - HT400 (RC) control panel - Compressed air maintenance unit - User, maintenance, and operating manual - CE declaration of conformity Otto Machine For over 30 years, Otto Machine has been selecting and selling used machine tools and measuring systems in Italy and abroad. The machines can be viewed at our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. It is possible to arrange a visit to our showroom or a video call to view it remotely.

Condition: used, Year of construction: 2008, Coordinate Measuring Machine Wenzel XO 55 (Year of Manufacture 2008) in well-maintained and fully functional condition. The machine is based on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The XO 55 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Gbedpfsyyulnsx Akyju Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Special features: Core drilling for installation with rotary-tilt frame Included transport frame: On loan Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Exchange bridge: SCR200 (empty) Joystick: HT400 Probe interface: PI200 head interface: PHC10-2 Probe module: 1 × TP200 Standard Force Module Probe head: PH10T Probing system: TP200 PC System: Windows 11 (current configuration) Controller: WPC2030 Installed software: WM | Quartis R2026-1 Measuring range Z: 500 mm Measuring range Y: 1.000 mm Measuring range X: 500 mm

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. Gsdpfx Akezqc Hrjyjbu It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.