Automatic bar lathe

TSUGAMI BS26-III

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: Dsdpfxoywllys Akvjkr • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo. Dkedpfx Asyucd Hekvjr

Condition: used, Year of construction: 2014, turning diameter 320 mm turning length 510 mm control i Serie Fanuc Dksdjzl E Riepfx Akvsr swing diameter over bed slide 250 mm spindle turning speed - stepless 6000 U/min spindle bore 65 mm power capacity 15 kW total power requirement 20 kW weight of the machine ca. 3.5 t dimensions of the machine ca. 2,59 x 1,6 x 1,7 m Machine has chip conveyor and Tail stock. It has C- axe and live tooling. Control: Fanuc i series

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer Djdpfx Akovtrc Sevekr 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump Dedpsycvaqofx Akvokr - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: good (used), Year of construction: 1999, CONFIGURATION, ARCHITECTURE: PARALLEL LATHE GUIDANCE: PRISMATIC, 3 WAYS THE CARRIAGE CAN MOVE WITHOUT INTERFERING WITH THE TAILSTOCK AND STEADY RESTS, ESPECIALLY SUITABLE FOR SHAFTS DISTANCE BETWEEN CHUCK AND TAILSTOCK: 6000 mm CHUCK DIAMETER: 1000 mm SWING OVER BED: 1020 mm TURNABLE DIAMETER: 700 mm BED WIDTH: 900 mm LOAD CAPACITY BETWEEN CHUCK AND TAILSTOCK: 12,000 kg 4-POSITION AUTOMATIC TOOL TURRET: YES MOTORIZED TAILSTOCK: YES SPINDLE SPEED: 1–720 rpm CONTROL (BRAND/MODEL): SIEMENS 840 D POWER LINE AIR CONDITIONING IN ELECTRICAL CABINET: YES CHIP CONVEYOR: YES, DRAG-TYPE, NEW IN 2021 EXTRAS OPEN STEADY REST: 2 UNITS CLOSED STEADY REST: 1 UNIT Dkedpfx Aoyhrnujkvjr INSTALLED MACHINE DIMENSIONS (L x W x H): 14 x 3 x 2.5

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L Dsdpsyi Hwtjfx Akvjkr total power requirement 37 kW weight of the machine ca. 8500 t

Condition: ready for operation (used), Year of construction: 1998, Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible. Dkjdpfxeuzlfaj Akver

Condition: ready for operation (used), Year of construction: 1999, turning length: 600 mm, turning diameter over cross slide: 350 mm, rotational speed (max.): 3,500 rpm, Fanuc 21T 3 axes C-axis for rotating tools 12-position turret chip conveyor Dkjdpfxjzdiy Eo Akvjr tool set

Condition: excellent (used), Year of construction: 2017, spindle bore: 8 mm, spindle speed (max.): 16,000 rpm, turning length: 125 mm, bar diameter (max.): 7 mm, Hanwha XD07 CNC Swiss-type lathe – condition: very good Dkjdpfexw Nxujx Akvsr Iemca Elite 112 bar feeder High-pressure unit with 4 switchable valves Kraft und Bauer fire extinguishing system Max. machining diameter: 7 mm Main spindle speed: up to 16,000 rpm Sub spindle speed: up to 16,000 rpm C-axis: main and sub spindle Tool stations Turning holders: 4 Face drilling stations: 3 Cross drilling stations: 3 Dimensions: 1520x910x1520 mm Weight: 1000 kg