Used Wood Milling Machine for sale (67,156)

Condition: new, Year of construction: 2025, • 3kW electric motor • infeed and outfeed table Gbsdpezqzuhjfx Ah Eow • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm • sliding table width: 350mm • overall table width: 750mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM Gsdsz Eh Egopfx Ah Eobw TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 4193, total height: 1,789 mm, total width: 1,300 mm, total length: 1,200 mm, overall weight: 1,500 kg, Weight 1,5 t serial number 4193 Gbedpfx Ahezxt Tle Eow ja vice ja x-travel 500 mm length 1200 mm width 1300 mm height 1789 mm

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 x-travel 1000 mm angular milling head ja documentation ja Gbjdjzhcizopfx Ah Ejw serial number 733 weight of the machine ca. 4,7 t

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Please refer to the attached expert report for details on the condition of the item. Gsdpfx Ahjzgc T Ds Eobw

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,400 mm, total width: 2,800 mm, total length: 3,600 mm, overall weight: 5,500 kg, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm Gedpjwm Rqajfx Ah Eebw

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Gedpfjydvzdjx Ah Eobw Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: used, Year of construction: 1970, functionality: fully functional, 1 used: Universal milling machine, second-hand • Manufacturer: Klopp • Model: FW 11/4 • Year of manufacture: unknown, approx. 1970 • Table clamping area: 1100 x 300 mm • Spindle taper: SK 40 Gbedpfx Ahjw R T A Es Eew • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12–340 mm/min Accessories: Various tool holders and cutters, 1 set of collets Hydraulic vice with pneumatic support pins Vice jaw width: 160 mm

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 5429, table width: 4,800 mm, table length: 2,600 mm, table height: 600 mm, workpiece height (max.): 1,200 mm, travel distance X-axis: 4,800 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, We are offering this used CMS ARES 348/26-NEWPX5 vertical machining center, manufactured in 2009. Manufacturer: CMS Model: ARES 348/26-NEWPX5 Year of manufacture: 2009 Serial number: 5429 Machine type: Vertical machining center 5-axis CNC gantry milling machine | Year of manufacture 2009 | FANUC control Fully operational industrial 5-axis CNC gantry milling machine from CMS (Italy). The machine has been used for milling, drilling, and contour machining of aluminum honeycomb panels, sandwich panels, and other technical sheet materials. Working demonstration possible in Tilburg. Technical specifications Manufacturer: CMS, Italy Model: Ares 48/26-NEWPX5 Year of manufacture: 2009 Gbedpfo Ai D Ebsx Ah Esw Serial number: 5429 Number of axes: 5 CNC control: FANUC Nominal X × Y × Z travel: approx. 4,800 × 2,600 × 1,200 mm (X/Y to be verified) Workpiece clamping: Aluminum vacuum grid table with multiple zones Tool changer: Automatic tool magazine, 16 positions Condition: Fully operational CE marking: Present Included spare parts: * Reconditioned spare milling spindle, CMS 12 kW, max. 24,000 rpm; type CMS 63 F; item number 0014477. Reconditioned and supplied by D.E. Spindel Doctor in 2020, including wooden transport crate. * New, unused spare vacuum pump, Busch SV 1025 D 000, year of manufacture 2018, with 3-phase electric motor and filter system; unused and in original packaging. Current application: Milling of aluminum honeycomb and sandwich panels, composites, plastics, technical sheet materials, and large three-dimensional workpieces. The Z-axis travel of 1,200 mm provides space for taller products and molds; the actual machining capabilities depend on the tooling and workpiece clamping. Scope of supply and inspection Location: Tilburg, Netherlands. The machine is fully operational and can be inspected while running by appointment. Dismantling, transport, and reinstallation by arrangement. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1970, Deckel FP2 with 500mm travel, Huttelmaier retrofitted tool milling machine with 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. Adjustable table, electrically locked milling guard, SK 40 spindle mount. Accessories: various collets and milling chucks. Good, operational condition. Can be demonstrated under power by arrangement. Gjdo Aih Tpjpfx Ah Ejbw

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2838-0410, overall weight: 2,500 kg, We are offering this used DECKEL FP4 NC universal milling and drilling machine, manufactured in 2003. Manufacturer: DECKEL Model: FP4 NC Gjdpfj Ah Dlhsx Ah Ejbw Year of manufacture: 1981, general overhaul in 2003 Machine type: Universal milling and drilling machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - spindle locking - blade adjustable front/back, up/down - blade guard - motor 1.1kW - dust extraction port diameter 80mm Milling machine: Arbor: - spindle diameter 40mm - spindle working height 140mm - spindle locking - max. milling cutter diameter 350mm - 2 speed settings 3000, 4500 rpm - motor 5.5kW - brake - side carriage – manual feed - carriage dimensions length/width 1180x600mm - angle ruler - 2 pneumatic clamps - dust extraction port diameter 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm Godpfx Ahe Aithzs Eebw - weight 735kg – very good condition – used milling machine Net price: 13900 PLN Net price: 3233 euros, depending on the exchange rate, 4.30 euros (Prices may vary in case of significant fluctuations)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Gsdpewid Spofx Ah Ejbw Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Gedpfx Ahjy Ni Ivo Ejbw Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Gjdpfx Aezfwm Njh Ejbw Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Gjdpfx Aeyahv Ssh Ejbw CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: good (used), Year of construction: 1977, Used milling machine from Doria Gjdpfx Ahs Aip H As Esbw Type: FU90 Table dimensions: 1000 x 300 mm ISO 30 spindle Year of manufacture: 1977 Travel: Y/X/Z 800/800/400 3-axis digital read-out Automatic feed on Y/X/Z Includes milling chuck

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: Gjdpfxsy Iwf He Ah Eebw - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. Gbsdpfexc Rmqex Ah Esw High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 30762, spindle speed (max.): 3,000 rpm, type of input current: three-phase, total length: 10,000 mm, total height: 2,000 mm, total width: 5,000 mm, table length: 3,100 mm, drilling capacity: 40 mm, drilling depth: 130 mm, workpiece weight (max.): 7,500 kg, Plasma cutting machine for metals Manufacturer: Ficep Year of manufacture: 2008 Serial number: 30762 Technical specifications: Maximum workpiece width: 3,100 mm Minimum workpiece width: 400 mm Minimum workpiece length: 1,900 mm Maximum workpiece length: 6.4 m Maximum material thickness: 130 mm Maximum drilling diameter: Ø40 mm Maximum workpiece weight: 7,500 kg Plasma source: Hypertherm HPR260 Spindle speed: 180–3,000 RPM Minimum workpiece size: 200 × 150 mm Equipment: Complete line with motorized roller conveyors for feeding and removing material Approximate length of feeding conveyor: 8 m Approximate length of removal conveyor: 5 m Includes a wide conveyor for removing metal scrap. Gsdpfx Aez Inhgeh Esbw

Condition: used, Year of construction: 2002, functionality: fully functional, Milling machine, Strojtos_FGS-50 T-Plus. Gbsdps Akc Dajfx Ah Eow

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm Gedpfe Ait I Dsx Ah Esbw z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 2,500 rpm, total length: 900 mm, total width: 1,100 mm, spindle mount: MK 3, type of input current: three-phase, Three-phase 400-volt motor is running smoothly! The motor can run in both directions (left and right). The spindle speed is adjustable in 12 steps, from 125 to 2500 RPM. Drilling and milling are possible. Godpe Aiir Rsfx Ah Ejbw The spindle has power feed. Three feed rates are adjustable: 0.12 - 0.18 - 0.25 mm/revolution. MT3 spindle with draw-in collet. Maximum drilling depth: 100 mm. The head is height-adjustable. Maximum distance between table and spindle: 750 mm. The cross table is in good condition. Table size: 730 x 210 mm. Coolant pump located in the machine base. Emergency stop switch. Year of manufacture: 2001 Overall dimensions: 90 x 110 x 210 cm. Includes all accessories as shown in the pictures next to the machine. Contact us for shipping options! €2,000.00

Condition: ready for operation (used), Wanderer, Type 31 - L 500 / Long-Thread Milling Machine - Machine type 31 L 500 - Drive pulley speed 750 rpm - Milling cutter speeds 55/80/118/170/250 rpm - 5 speed stages - Max. milling length 500 mm - Center height 200-210 mm - Diameter of rotation over the bed 400 mm Gsdpfx As Aivdish Eobw - Diameter of rotation over the slide approx. 200 mm - Spindle bore approx. 85 mm - Drive power approx. 3 kW - Change gears (see images) - Work light Dimensions: L x W x H 2.4 x 1.5 x 1.7 meters / Weight approx. 3000 kg Errors and omissions excepted.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gsdpfx Aozuxn Toh Eebw Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.