Used Wood From 1401 Edges Anleimen Machine for sale (80,498)

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Hedpfxsw I U E Aj Aahep Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW Hedpfx Aowka S Ieahop - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Hedjw Tfxdspfx Aahsp Availability: short term Location: Odenwald

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming Hsdewka H Sjpfx Aahep - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Hsdsvymdqjpfx Aahep Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Gluing, max. 8 - 55 mm Incl. rotating control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. program-controlled chamfering, radius and corner copying unit with nesting package Incl. radius pull blade with nesting package Hedpfx Ajw Nadgsahsp Incl. surface pull blade Incl. grooving unit Incl. edge trimming unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Hjdpsx Rv Dyefx Aahjp Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. Hodpfx Aow Tfx Dsahjp - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Hedexc Rmqepfx Aahop Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Hodpfev R Nk Ujx Aahop Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, Used machine Hodjwkbcbopfx Aahop Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Hsdpfjw I H Rksx Aahop Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm Hjdpfx Aaezc Agkohsp - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table Hjdpfjw I Uvzjx Aahop • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm with roller guillotining with flush trimming with knife with top/bottom flush and bevel milling with HF motors Hsdpfxexc Rl Hj Aahop Location: Röllbach Availability: short term

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 THE ADVANTAGES 4 workstations on one machine 80, 300, and 1000 mm radii Straight and curved grinding back panel 150 mm belt height Pneumatic belt tension Continuously variable pneumatic unit oscillation Solid cast iron unit – ensures consistently good grinding results Hedpekwhwljfx Aahep Dust extraction around the entire work table Only the highest quality components Because we are confident in our products – 5-year warranty Each machine is handcrafted in our hometown (Rehnen) Lifetime spare parts supply GS & BG dust tested Motor power: 4 KW Grinding belt size: 150 x 2700 mm Grinding belt speed: 15 m/sec Table size: 345 x 2000 mm Space requirement: 2000 x 3000 mm Weight: 560 kg Dust extraction diameter: 140 mm Availability: short-term Location: Hochheim

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Features and technical data: - Double-sided operation with surface and contact grinding sides - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Programmable oscillation stroke: 10–90 mm - Grinding unit motorized tilting up to 45 degrees - CE-compliant / Dust-tested Accessories: Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Hsdpfjxvnmnsx Aahjp Availability: short-term

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees Hjdpfexzl Aqox Aahsp - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Hsdpfxex Enqus Aahop Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Hsdpfx Aoq A N Nueahep Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations) Hedpfxjy Id Nlj Aahep

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: Hedpfxsy Tkhxs Aahop - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm Hedpfx Asyga T Neahsp • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. Hodpfx Aev T Ttfjahsp - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein tiltable up to 30 Grad Hsdpezfqkzsfx Aahep Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg