Used Wood Mizer Lt 40 for sale (31)

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Dkjdpszagkzjfx Ag Tjw Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator Dkedpfx Ao Aavnfeg Tew – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Dkjdpfx Agsyr I Dme Tow

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops Dkjdpfeyrdg Djx Ag Tjw - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). Dodpfx Agoyz Ia Io Tskw If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Dkedpfx Agoxlnf Ao Tew

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Dksdsxhb Uvspfx Ag Tjw Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Dodjylw Sajpfx Ag Tokw Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: as good as new (ex-display), Year of construction: 2019, Wood-Mizer MS300 – Sliding table circular saw • Condition: Demo machine, exhibited at trade shows and exhibitions • Cutting height: 103 mm • Distance between saw blade and fence: 800 mm • Sliding table: 1,400 × 350 mm • Sliding travel: 1,235 mm • Work table length: 900 mm; overall width: 750 mm • Saw blade diameter: 315 mm • Arbor diameter: 30 mm • Spindle speed: 4,400 rpm • Blade tilt: 0–45° Djds Af Hdhspfx Ag Tekw • Motor options listed in the model specifications: 3 kW three-phase or 2.2 kW single-phase

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Dkjdpfxjyr Dawo Ag Tsw Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: as good as new (ex-display), Year of construction: 2024, warranty duration: 12 months,  Control panel  5 cutting heads  The angle of the 5th head can be adjusted within a range of 270 degrees  5 feed and pressure rollers  Adjustable feed speed: 3 – 15 m/min  4 dust extraction points  Height indicator allowing for precise adjustment of the table and machine height Dksdpfszqzy Rex Ag Tew  Width indicator allowing for precise adjustment of the timber dimensions  Infeed table with a length of 1.9 m and outfeed table with a length of 1 m Technical data CAPACITY  Four-sided planing • Maximum width 350 mm • Height range 10 - 160 mm  Two-sided planing • Planing width 410 mm • Height range 10 - 230 mm  Single-sided planing • Maximum width 510 mm • Height 230 mm TOP HEAD • Diameter 88 mm • Width 510 mm • Motor power 5.5 kW (7.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 20 mm BOTTOM HEAD • Diameter 72 mm • Width 410 mm • Motor power 4 kW (5.5 HP) • Rotational speed 6000 rpm • Max. planing depth 8 mm • Max. profiling depth 10 mm (15 mm drill) SIDE HEADS • Spindle diameter 30 mm • Max. Knife height 160 mm • Max. Diameter 160 mm • Motor power 3 kW (4 HP) • Rotational speed 6000 rpm • Max. planing depth 30 mm ADDITIONAL HEAD • Spindle diameter 30 mm • Max. Knife height 130 mm • Max. Diameter 200 mm • Motor power 3 kW (4 HP) • Rotational speed 3000, 6000, 9000 rpm • Tilt angle 270 degrees

Condition: new, Year of construction: 2025, • 3kW electric motor • infeed and outfeed table • milling head with adjustable tilt angle up to 270° and vertical travel of 500mm and horizontal travel of 350mm • safety clamp for the sliding table • spindle diameter, standard: 30mm • max. tool diameter: 200mm • max. tool height: 130mm • guide length: 152mm • sliding table length: 1100mm Dedpjzqzuhsfx Ag Tjkw • sliding table width: 350mm • overall table width: 750mm

Condition: as good as new (ex-display), Year of construction: 2023, Wood-Mizer MP280 – Four-sided planer / moulder • Year of manufacture: 2023 • Condition: Showroom machine, exhibited at trade fairs and exhibitions • Four-sided planing: maximum width 250 mm; standard working height 10–50 mm, up to 100 mm optional • Two-sided planing: width 300 mm; working height 10–230 mm • Single-sided planing: maximum width 410 mm; maximum height 230 mm • Cutter motors: top 4 kW; bottom 3 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.37 kW • Cutter speed: 6,000 rpm at 50 Hz • Side spindle diameter: 30 mm; maximum cutter head diameter: 140 mm Dkodps Af E Ursfx Ag Tjw • Dust extraction outlets: 1 × Ø125 mm and 3 × Ø100 mm • Central control panel with individual motor operation Machine location: Romania.

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Dkodpfjzvcapjx Ag Tow Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: excellent (used), Wood-Mizer HR700 horizontal band saw, Main motors: 2 x 15 kW, Blade feed motor: 1.5 kW, Feed rollers: 3 x 0.12 kW, Max. cutting width: 400 mm, Dkodpfxozg T Dys Ag Tjw Max. cutting height: 370 mm, Guide wheel diameter: 600 mm, Pneumatic material clamping system, Adjustable feed rate via frequency inverter: 0-30 m/min, Hydraulic blade tensioning system, Manual height adjustment.

Condition: new, Year of construction: 2024, 7.5 kW electric motor V-type log feeding system Set of additional rollers Set of pneumatic side discs Cutting dimensions Max. log diameter: 400 mm Min. log diameter: 100 mm Max. log length: 3.6 m Min. log length: 1.2 m Max. cutting width: 250 mm Min. cutting width: 7 cm Headstock equipment Automatic cutting width adjustment device (Setworks) Headstock adjustment: electric Blade cleaning system: LubeMizer Blade tensioning system: hydraulic Heavy-duty log clamping rollers Dsdpfxoztnaio Ag Tokw Spiked rollers Blade Length: 4670 mm Width: 32 mm, 35 mm, 38 mm Thickness: 1.07 mm, 1.14 mm, 1.27 mm, 1.40 mm Blade guide wheels Diameter: 600 mm Type: with belt Feeding system Speed: 0-20 m/min

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Djdpfx Aeyr Dfasg Tjkw Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: new, Year of construction: 2026, functionality: fully functional, • 22 kW electric main motor • Maximum material width: 550 mm • Maximum cutting width: 410 mm • Minimum material thickness: 18 mm • Maximum material thickness: 100 mm • Minimum board length: 800 mm • Minimum cutting width: 6 cm (trimmer), 2 cm (multi-blade saw) • 5 circular saws – 4 fixed and 1 movable • Adjustable feed speed: 0-20 m/min • Complete set of two lasers • Infeed and outfeed table • Setworks device for automatic adjustment of cutting parameters Dkedpfx Agszqyq Uo Tsw

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) Dkedpfx Aozqz Sgjg Tjw 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Dkodpfxszqz T Re Ag Tow Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: new, Year of construction: 2025, EG300EH25S-EMR Dsdpfoyynq Rjx Ag Tskw Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Dkjdjzqqn Depfx Ag Tsw

Condition: as good as new (ex-display), Segment for the LT15 Wide machine Cutting length: 2.7 m Width: 1.07 m Manual: 2 supports, 1 presser Dksdpfxezn I Hls Ag Tew Price per unit.

Condition: new, Year of construction: 2026, • Two main electric motors, each with a power of 11 kW • Maximum material thickness: 250 mm • Maximum material width: 300 mm • Minimum cutting height: 10 mm • Adjustable feed rate: 5-25 m/min Dkjdpfxjzqzgwe Ag Tow • Lower saw blade stroke: 10-150 • Upper saw blade stroke: 20-190 • Minimum distance between the saw blades: 15 mm • Saw blade lubrication: pneumatic sprayers • Hydraulic saw blade tensioning • Manual setting marker • Wheel diameter: 710 mm • Outfeed table length: 2.5 m • Double pressure rollers

Condition: used, Woodmizer EG300 Twin Blade Edger, year 2019, in good condition Technical data: Pass-through width: 550 mm Cutting height: 60 mm Minimum cutting width: 60 mm Maximum cutting width: 410 mm Width adjustment: Electric Minimum board length: 700 mm Saw blade diameter: 2 x 350 mm Motor: 15 kW Feed speed: Infinitely variable 0 to 25 m/min Machine length with tables: 4900 mm Machine width: 1630 mm Dsdpfx Agsx H Uhie Tokw Machine height: 1250 mm Working height: 900 mm Weight: 988 kg Price subject to change. Errors and misprints excepted.