Used Wood From 1401 Edges Anleimen Machine for sale (87,236)

Condition: new, Year of construction: 2025, power: 200 kW (271.92 HP), overall weight: 7,800 kg, SALE FROM STOCK Max Log Diameter to Be Peeled: 40 cm Peeling Capacity: 20 tons/hour Maximum Peeling Time: 150 seconds Electric Automation: Available Dsdpfx Abewy Dthj Tjcr Motor Power: 200 kW Log Length to Be Peeled: Over 4 meters Rotor Speed: 1000 RPM Total Machine Weight: 8.7 tons

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Dcsdpfev Dvhyjx Ab Ter Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. Dedpfexc Rmqox Ab Tscr All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Perimeter tenoning machine BALESTRINI model TO 2 working fields, round/longitudinal tenons – independent processing, adjustment of tenon thickness and width, Dcodpfxswxrmte Ab Tjr adjustable table angle setting.

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min tool taper SK 30 Dcedoxbh E Ujpfx Ab Ter table load max. 100 kg Weight ca. 500 kg

Condition: used, SAGA HFVD45-SA 4.5 m³ wood vacuum drying chamber 3 phase, 380V, 50Hz-40KVA OUTPUT POWER: 30 kW TANK DIMENSIONS: 5700 * 2150 * 2000 mm Dcsdpfxjw Ac Hfe Ab Tjr STACKING SIZE: 4500*1000*1000 mm Stacking capacity: 4.5 m³ INTERNAL DIAMETER: Φ1.7m Manual feeding, automatic feeding with motor HYDRAULIC PRESSURE: 3 tons (2 units) VACUUM PRESSURE: -0.093 MPa. Motor Power: 7.5 kW

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW Dcodev N Edbjpfx Ab Tsr - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" Djdpfx Absv Dvfrj Tecr 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Djdpfxsw Tfxds Ab Tjcr Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,500 h, functionality: fully functional, spindle speed (max.): 5,400 rpm, Mebor SB 420 lathe for producing round logs for log cabins. The Mebor SB 420 milling machine is designed for processing logs used in the production of wooden houses, playgrounds, etc. The machine performs five operations: roughing, finishing, cutting longitudinal and transverse grooves (sockets), and drilling holes in logs, enabling the combination of five operations in one machine. After processing, the log is smooth, with all necessary grooves and boreholes, ready for construction. Dcjdpfx Abjvzhv Rs Tor The machine tool is equipped with a belt for ejection of sawdust and waste.

Condition: good (used), BACCI FC 8 2500 Linear Milling Machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Dsdpfx Aov T I Dfsb Tscr Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Grinding 3kw Grinding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE certificate Machine weight 5100kg

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; Djdpfjidxu Hox Ab Tscr TECHNICAL SPECIFICATIONS AVB-68HELIX Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 240 blades/cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2300*800*1100 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 11 KW Total Power 78,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 2 mm Max.Log Input Length 10-220 cm Max.Log Input Width 10 - 75 cm Working Distance 2400 mm Machine Dimensions L5700 x H1700x W1600 mm Weight 5.600 kg Production Capacity 2000-2500 kg/h

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE Dodpfx Abev N Ebae Tscr TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Dodpfx Aju R Sxxjb Tscr Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Dedpfewhbgujx Ab Tjcr Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Dcjdpfx Ajwun H Ueb Tsr Possible to buy also the Radius edge banding machine AKV88D.

Condition: new, Year of construction: 2025, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm Dcedpfsvk Saxsx Ab Tjr • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: used, functionality: fully functional, total length: 1,750 mm, total width: 2,600 mm, total height: 2,150 mm, overall weight: 1,280 kg, tank capacity: 2,800 l, The Dorit VV-6-1401 Vacuum Churn is designed to improve the quality of meat products by facilitating the marinating and tenderizing process. Made of stainless steel, it ensures durability and hygiene, while allowing for simplified front loading and unloading. Thanks to its automatic discharge system, the front-to-rear transition is seamless, optimizing production efficiency. The machine offers advanced features such as a programmable timer to manage processing times and settings for speed, program, and vacuum. Built-in gauges monitor vacuum and operating status, ensuring consistent results. This churn is ideal for meat marinating operations, allowing for even absorption of salts and marinades, while increasing production capacity thanks to its varied programs. Dorit Vacuum Meat Tumbler Stainless steel construction Front loading and unloading Automatic unloading when switching from front to rear Programmable interval timer for controlling total time, massage, and rest interval Setting switch for speed, program, and vacuum Gauges for vacuum and operating status Voltage: 400 V three-phase Frequency: 50 Hz Drum volume: 2800 L / Maximum capacity: 1400 kg Dimensions (d x w x h): 1750 x 2600 x 2150 mm Net weight: 1280 kg Dcjdpfx Asu E Ip Aeb Tjr rjmpaoh5

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Dodpfevwfiaex Ab Tocr

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Dcjdpfx Aevx D Aueb Ter Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Complete Wood Shavings Line Dcjdpfxoxq Rvus Ab Tsr Includes: Loghaver, Vecoplan screen, 3 conveyors, dryer, and furnace Fully operational wood shavings production line in excellent condition. The equipment can be sold as a complete set or individually by parts. For more information, technical details, or photos, please contact us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. Dodpfetutwvjx Ab Tecr The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: used, Masterwood mortising machine Dcsdpfxjx Dnmdj Ab Tor

Year of construction: 2012, condition: used, Used machine Year of manufacture: 2012 Equipment and technical data: Axes: X-axis: - Max. workpiece length: unlimited - Min. workpiece length: 250 mm - Traverse speed: 0-25 m/min Y-axis: - Max. workpiece width: 1,000 mm - Min. workpiece width: 80 mm - Traverse speed: 0-50 m/min Z-axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 10 mm - Traverse speed: 0-20 m/min Minimum and maximum workpiece sizes depend on the weight and on the length-to-width ratio! Units: 16-fold drilling head: - Vertical spindles in X direction: 5 pcs. - Vertical spindles in Y direction: 5 pcs. - Horizontal double drilling spindle in X direction: 2+2 pcs. - Horizontal double drilling spindle in Y direction: 1+1 pcs. - Spindle spacing: 32 mm - Spindle speed: 4,000 rpm - Motor: 1.7 kW Grooving saw: - In X direction - Speed: 4,000 rpm - Max. saw blade diameter: 125 mm - Motor: 1.7 kW (Grooving saw is integrated in drilling head) Milling unit: - Speed: 1,000 to 18,000 rpm - Motor (frequency-controlled): 3.3 kW - Collet chuck: max. 25 mm - Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Extraction: - Volume: 2,000 m³/h - Air velocity: 25 - 30 m/sec - Extraction nozzle: 1 x 150 mm Software: MASTERWORK-MACHINE VERSION Required air pressure: 8 bar Air consumption: max. 750 l/min Air tables in the working area Roller table at infeed and outfeed Additional foldable roller table at infeed Panel measuring sensor Ball screw spindle and linear guides Rack and pinion drive Central lubrication DXF file import Dimensions: 1,990 x 2,410 x 1,510 mm Weight: 1,300 kg Dcodpfx Abexya Rge Tsr Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 1994, - quantity of knives 4 - lenght of knives 720 mm - diameter of drum 900 mm Dcedpfow U Diwex Ab Ter