Used Wood Drying Kiln for sale (8,688)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase Nwodpfx Abswp Rqfswoi • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Nwjdomidtrspfx Abwji Chamber with stacking trolley Net volume 7.2 m3 with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Nwjdpfxew Uf S Ho Abwei

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Njdezki Txopfx Abwowi Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: Nwedpoyrdg Djfx Abwji - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: Nwedpfx Abey Na Hvowsi – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: as good as new (ex-display), Segment for the LT15 Start/Classic machine Cutting length: 1.95 m Njdpfozn Natex Abwowi Bed width: 0.91 m 2 supports, 1 clamp Non-adjustable legs

Condition: as good as new (ex-display), CC2-2.7H chain conveyor with drive Nodezn I Tlepfx Abwswi Length: 2.7 m Width: 3 m, distance between chains: 1.5 m Height: 0.89 m

Condition: as good as new (ex-display), Bed segment for the LT15 Start/Classic machine Cutting length: 2.7 m Bed width: 0.91 m Nwedpfezn I R Rjx Abwsi 2 supports, 1 clamp Adjustable legs

Condition: as good as new (ex-display), Three-row sliding conveyor for boards. Material is fed from a sorting table. Length: 2.4 m Height: 700 mm Nodozn I N Tjpfx Abwjwi Width: 2.2 m Distance between chains: 1 m, with the option to mount additional chains every 0.5 m.

Condition: as good as new (ex-display), Conveyor belt for WM3500/WM4000 machine Conveyor belt length: 2.9 m Nwodpfezn I Ivsx Abwoi Width: 900 cm Height: 1.05 m

Condition: as good as new (ex-display), Segment for the LT15 Wide machine Nwedpfxozn I Hlo Abwji Cutting length: 2.7 m Width: 1.07 m Manual: 2 supports, 1 presser Price per unit.

Condition: as good as new (ex-display), Cutting segment for the LT15 Wide machine. Cutting length: 1.95 m Bed width: 1.03 m Nwsdpfxszn Izvj Abwei 2 supports, 1 presser Adjustable legs The stated price applies to 1 unit.

Condition: as good as new (ex-display), Roller table for EG800 multi-blade saw Length: 1.6 m Height to the top of the roller: 900 mm Width: 738 mm Njdpfx Abjzn Iyfswowi

Condition: as good as new (ex-display), Bed segment for LT15 machines Cutting length: 2.7 m Bed width: 0.98 m Without supports, clamps, and legs. Nwodpozn Ixzefx Abwoi

Condition: as good as new (ex-display), Receiving table for LT series machines Length: 1.8 m Height: 765 cm Nwedezn Iu Nepfx Abwoi Width: 638 cm

Condition: as good as new (ex-display), Receiving table for LT series machines, with side sheet metal panel. Nwedpfxezn It Eo Abwsi Length: 1.8 m, with a 2.5 m sheet metal panel. Width: 627 cm. Height: 754 cm.

Condition: as good as new (ex-display), Intermediate sliding door Nwsdpfx Ajzn Irhobwji Length: 1.25 m Height: 862 mm Width: 2.3 m

Condition: used, Bed segment for the LT15 Start/Classic machine Cutting length: 1.95 m Bed width: 0.91 m Njdpjzn Ip Hsfx Abwowi 2 stops, 1 pressure clamp Adjustable legs

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: Nsdpfx Absyr Dawswswi X - 3080 mm Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Nsdpfxjzmukuj Abwowi

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Nedpfozmt U Eox Abwjwi

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Nodpfxeyynq Re Abwewi Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: ready for operation (used), operating hours: 350 h, machine/vehicle number: LT70HE25SRAHSH4-SR2SWR, Brand: Wood-Mizer Model: LT70HE25SRAHSH4-SR2SWR 22 kW electric motor 6.1 m saw length SW10 setworks LMS Operator station Inclined conveyor with board return Chain turner, 3 vertical side supports, central clamp on 2 shafts, 2 motorized rollers with dual cylinders, 2 clamps, absorption roller Band wheels for 50 mm wide blades Debarker Laser sight Nwedezln S Nopfx Abwji Leg set for raised frame ("H") Log deck, 2 chains, 6 x 1.66 m

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Nsdpfx Aeyr I Dmebwswi