Used Wood Drying Kiln for sale (9,002)

Condition: excellent (used), functionality: fully functional, NESS Smokehouse Chamber Installation with Cooling Shower and Smoke Generator Complete NESS smoking installation, designed for thermal processing, smoking, and cooling of meat products. The set includes smokehouse chambers of various capacities, a cooling shower, a wood chip smoke generator, and a condensate tank with Grundfos circulation pumps. The set includes: 1. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm Nedoxq Rt Hepfx Af Sowl 2. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 3. NESS Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1100 × 1100 × 2000 mm External dimensions: 1500 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 4. Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1030 × 1120 × 2000 mm External dimensions: 1350 × 1420 × 3050 mm Control cabinet: ADITEC MIC 200F, 350 × 200 × 550 mm No door 5. NESS Cooling Shower for 2 smoking trolleys Internal dimensions: 2300 × 1170 × 2060 mm External dimensions: 2400 × 1350 × 2700 mm Control cabinet: NESS Duschmatic, 380 × 230 × 380 mm 6. NESS Wood Chip Smoke Generator Dimensions: 900 × 550 × 2400 mm 7. Condensate tank with 2 Grundfos circulation pumps Tank dimensions: 1100 × 1150 × 1200 mm Pump dimensions: (2×) 250 × 200 × 600 mm The NESS installation is an advanced smokehouse system enabling a complete technological process: smoking, cooking, cooling, and drying. The chambers are equipped with independent control cabinets featuring the Digitronic RF3 D-N system for precise process parameter management. The Duschmatic cooling shower allows for rapid and uniform cooling of products after the smoking process. The wood chip smoke generator and the condensate system with Grundfos pumps ensure reliable and hygienic operation of the entire installation.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed Nwsdpfx Ajzv U Tbjf Sjl • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Condition: as good as new (ex-display), Conveyor belt for WM3500/WM4000 machine Nwsdpfxjzn I Ive Af Sol Conveyor belt length: 2.9 m Width: 900 cm Height: 1.05 m

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg Nwodpozu R Thofx Af Ssl ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of workpiece: 200mm - max height of workpiece: 140mm - number of spindles: 4 Nwodpjzx Sn Ujfx Af Sel 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 140mm, 4kW 3) vertical left: 140mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm – top: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed roller, rubber, double – bottom: - side pressure roller - infeed roller, toothed, driving, angled in the lower bed - side pressure roller - outfeed roller, driving, metal, smooth - all rollers are pneumatically pressed - length of infeed bed: 1600mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed rate adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x140mm - dimensions (L/W/H): 3200x1700x1750mm - weight: 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12357 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Nsdpfxsyynq Ro Af Sowl Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: like new (used), Like-new impact crusher / pre-crusher / impact reactor for sale. Professional stationary system in like-new condition, originally valued at over €2 million. Suitable for crushing materials such as wood chips down to saw dust size. Not only suitable for wood; versatile for a wide range of applications! Material particle sizes: 0-300mm, max. cross-section: 10 cm² Oversize particles: length up to 350 mm, max. 0.5% Fine fraction: 15% (3mm) Water content: 30-55% Nodpszx D R Ijfx Af Sowl Ash content: 5% based on dry weight Bulk density: 300-450 kg/m³ Total conveying capacity: approx. 170 m³/hour! System components: SEE PDF

Condition: good (used), Year of construction: 1967, Kupfermuller Lignum double-sided thicknesser Nsdpfxjtzcmto Af Sewl Kupfermuller Lignum double-sided thicknesser. Stable construction. The machine has a planing width of 630 mm and 4-knife shafts. The machine has a processing accuracy of 0.1 mm. The planing height is 180 mm. The machine has steel rollers mounted in a table with its own drive, that is, active split rollers. The machine is therefore ideal for planing wet and dry wood for gluing. Net price. VAT invoice, machine with electrical cable covers and stop buttons on both sides, ready to go. Stable cast iron construction. Weight of about 3 tons. The machine does not require any financial outlay.

Year of construction: 2026, condition: new, PROFESSIONAL CORMAK STUMP GRINDER – POWER, PRECISION, AND PERFORMANCE Designed to meet the demanding requirements of professionals in the forestry, landscaping, and municipal service industries, the CORMAK Stump Grinder is a high-performance machine equipped with a powerful 12 HP petrol engine with a 420 cm³ displacement. It has been engineered for efficient removal of tree stumps after felling, eliminating the need for costly and time-consuming excavation or the use of chemical treatments. Main Advantages and Design Features Powerful drive unit – the 12 HP (420 cm³) petrol engine provides high torque required for working with hard wood and deep root systems. Precision cutting system – the cutting wheel is equipped with durable, multiple-hardened cutting teeth, ensuring fast and effective stump grinding below ground level. Ergonomics and mobility – the optimized design, approximately 113 kg weight, and balanced center of gravity allow easy maneuvering even in hard-to-reach areas such as narrow gates and private gardens. Heavy-duty industrial frame – manufactured from thick-wall steel profiles with a powder-coated finish, providing excellent resistance to mechanical damage and corrosion. Operator safety – protective guards and an ergonomic control system positioned within easy reach protect the operator from flying wood chips and debris. Applications The CORMAK Stump Grinder is designed for professional landscaping companies, municipal service providers, construction companies preparing sites for development, and demanding private users. It enables complete stump removal to a depth that allows easy lawn seeding or new planting without obstacles from remaining roots or wood residues. Technical Specifications – Machine Nwsdpoy Sggnefx Af Sol Specification Value Cutting wheel diameter 300 mm Cutting wheel thickness 90 mm Number of cutting teeth 9 pcs (with carbide tips) Maximum grinding depth below ground Up to 225 mm Maximum grinding height above ground Up to 515 mm Machine weight Approx. 110 kg Engine Technical Specifications Engine type 4-stroke OHV, air-cooled Engine displacement 420 cm³ Rated power 9.0 kW / 12.24 HP Starting system Manual recoil starter Cylinder type Cast iron sleeve Cylinder bore 90 mm Stroke 60 mm Maximum engine speed 3600 rpm Fuel tank capacity 6.5 l Oil capacity 1.1 l Dry engine weight 31 kg Length 499 mm Width 370 mm Height 433 mm Maximum engine power (EPS*) 15 HP *EPS – Effective Power Solutions Engine Features OHV technology – provides optimized performance, extended engine life, and improved fuel efficiency. Lo-Tone PRO muffler – reduces operating noise, providing a significantly lower audible sound level. Dual air filtration system – prevents airborne contaminants from entering the engine, improving protection and reliability. Variable speed control – allows adjustment of engine speed to deliver optimal power in demanding working conditions. Cast iron cylinder sleeve – increases durability, wear resistance, and improves oil control for extended engine life. Dual ball bearings – provide additional durability and contribute to longer engine service life. Float-type carburetor – ensures proper fuel delivery, easier starting, and reduced fuel consumption. High torque output – delivers greater power and improved cutting performance. Enhanced operator safety – protective guard shields the user against discharged grinding debris.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Fully refurbished, in stock, warranty 12 months, no solvent oven! Nwodettbf Uspfx Af Sel - Maximum temperature 250 °C - Total steam volume 20.5 m³ - Usable dimensions (L x W x H) 2300 x 2750 x 2200 mm - Control system Jumo Imago 500 - Heating power 36 kW - Maximum load of the furnace car 6000 kg, electrically driven - Electric inlet and outlet air dampers Belimo - Exhaust fan controlled via frequency inverter - Installation dimensions (L x W x H) 3000 x 3000 x 3125 mm plus track in front of the oven - Own weight approx. 3500 kg - Freestanding control cabinet - Documentation - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Hearth furnace, oven, industrial oven, convection oven, chamber convection oven, annealing oven, heat treatment oven, drying oven, tempering oven, chamber oven, drying cabinet, hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm Nedpfxezcpixo Af Sewl - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Nedpfozz Ai Usx Af Sswl Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 Njdpfx Ajyvgiaof Sewl - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: ready for operation (used), Year of construction: 2007, Rotor: approx. 248 mm Feed opening: approx. 800 x 1000 mm Rotor length: approx. 800 mm Nwsdsz Eqhkepfx Af Sjl Motor: 18.5 kW Tools: 19 Technical data available upon request Space requirement: approx. 1300 x 2100 mm

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Nedpjvtwzmefx Af Sswl Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: as good as new (ex-display), Segment for the LT15 Wide machine Cutting length: 2.7 m Nodszn I Hlspfx Af Sjwl Width: 1.07 m Manual: 2 supports, 1 presser Price per unit.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, fuel type: electric, gearing type: automatic, Pezzolato electric, 300 KW 22 KW hydraulic Nsdpfezwdrisx Af Sswl Model PTH 1000/1000 E Sales code C6905 The machine is still connected to the electrical power supply.

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Nodpfx Ajv I Ur Sjf Sjwl Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width 1300 Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Nodpfx Aszqqn Dof Sswl

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Nodsz D E Icjpfx Af Sowl

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Nsdpfjz Dtukex Af Sswl

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and chippers – MHR630 proline The MHR proline series comprises robust and energy-efficient wood chipping machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical and high-performance solution. The MHR proline machines are manufactured in our factory in Germany and can be inspected here. Advantages: - Continuous, consistent shredding process - High performance with low energy consumption - 2 knife rows for increased throughput - Robust design Nsdpfxjz Ezdpe Af Sowl - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler waste shredders – “Made in Germany”

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - Max. width of the workpiece: 240mm - Max. height of the workpiece: 130mm - 6 spindles: 1) Horizontal lower, 240mm, 7.5kW 2) Vertical right, 130mm, 5.5kW 3) Vertical left, 130mm, 5.5kW 4) Horizontal upper, 240mm, 7.5kW 5) Horizontal upper, 240mm, 5.5kW Spindles 4 and 5 are adjustable up/down electrically Nsdpfjztzhgsx Af Sewl 6) Horizontal lower, 240mm, 5.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm *Top: - 8 feed rollers, metallic, toothed, including 3 double rollers - 4 delivery rollers, smooth, rubber, including 2 double rollers *Bottom: - 3 feed rollers, smooth - 3 side pressure rollers - Infinitely variable feed speed adjustment via frequency inverter - Pressure rollers pneumatically actuated - Feed motor: 7.5kW - Feed on Cardan shafts - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Length of the infeed table: 2480mm - Pneumatic opening/closing of the hood - Pneumatic blowing of the table - Central lubrication of the table - Diameter of the dust extraction nozzles: 3x120mm, 3x150mm - Dimensions (L/W/H): 5300x1700x1800mm - Weight: 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the hood - Pneumatic blowing of the table - Spindles 4 and 5 are adjustable electrically - Used planer, very good condition Net price: 99900 PLN Net price: 23240 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Nedpfxozqq R Se Af Sowl

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Njdpfxjya Hvqo Af Sjwl Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase