Used Wood Chip Boiler for sale (10,885)

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Ppedpfx Aoyalbljmyow

Condition: used, Substation for wood chip extraction – Wood chip extraction system Pedsyx Digopfx Amyopw Brand: Fida Installed power: 37 kW System equipped with 98 filter bags (Ø 250 mm, height 2810 mm), designed to ensure high suction and filtration capacity. Overall dimensions: 8500 x 2500 mm

Year of construction: 2003, condition: used, wood chip sieve Ppedpfex Ta Nfex Amyjw

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Pjdpfxstmtf Rs Amyepw - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C Ppsdpfxowp Rqfo Amyew • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Ppedpevvmvfsfx Amyjw

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Ppodpfx Amoykmlmoyjw Sale by customer order.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. Pedpfjyf U R Hsx Amyepw If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, functionality: fully functional, - Manufacturer: GEMOS CZ, spol. s r.o. - Boiler type: gasification - Output: 110 kW - Year of manufacture: 2010 - In operation since: 2010 Pedpfx Asxa Evbemyepw - Fuel feeding: automatic, with screw conveyor

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: Ppedpoin Ewlofx Amysw The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Ppodsw Uf S Hspfx Amysw

Condition: excellent (used), Year of construction: 2010, Fröling Lambdamat 500 – 500 kW Wood Chip Boiler For sale: a high-performance Fröling Lambdamat 500 biomass boiler, manufactured in Austria. This industrial heating system is designed for reliable and efficient operation in industrial facilities, district heating plants, agricultural operations, sawmills, drying plants, greenhouses, and large commercial or public buildings. Technical Specifications * Manufacturer: Fröling * Model: Lambdamat 500 * Rated output: 500 kW * Operating pressure: 6 bar * Fuel types: * Wood chips * Wood shavings * Sawdust * Wood pellets * Other biomass fuels Features and Benefits * Fully automatic operation * Lambda-controlled combustion * Hydraulic moving grate * Automatic ash removal * Automatic heat exchanger cleaning * High efficiency * Low emissions * Heavy-duty industrial construction * Reliable continuous operation * Easy maintenance * Long service life Thanks to its advanced combustion technology and hydraulic moving grate, the Fröling Lambdamat can efficiently burn a wide range of biomass fuels, including wood chips with higher moisture content. The intelligent control system ensures economical operation, excellent combustion quality, and consistently low emissions. Ideal for: * Industrial facilities * Sawmills * Wood processing companies * Agricultural businesses * Drying plants * Greenhouses * Hotels * Schools Pjdpfx Aezlw Imomyepw * Municipal buildings * District heating systems The boiler can be inspected at our warehouse in Mosonmagyaróvár, Hungary, by appointment. We can also assist with loading, transportation, and delivery arrangements upon request. For more photos, technical documentation, and detailed information, please visit:

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Ppodpfx Ameqmi Ireyow Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES – Swedish production – Additional screen included – Very good condition Ppjdpfx Aoza D Uqsmyjw – Used chipper Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher of the German company WEIMA - overhauled - year of production 1992 - documentation Ppjdpfxjuditwe Amyow TECHNICAL PARAMETERS: hopper dimension 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main motor 22 kW number of knives 19 pieces rotating cutting knives 30 mm x 30 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER height of pressing drawer 275 mm diameter of spigot fi 200 mm overall dimensions of the machine (length / width / height) 210 / 160 / 180 cm weight 1600 kg

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg Ppsdpfxsr Ak Rgj Amyow

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: Podsw H Rn Eepfx Amyopw - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 1,600 kg, fuel type: electric, - German-made - Year of production: 2001 – DTR documentation – Autoreverse Ppsdpfxoy Na N Do Amyow – Pressing drawer TECHNICAL PARAMETERS: – Feed opening size (width/length): 820 x 1420 mm – Rotor diameter: 300 mm – Rotor length: 820 mm – Total power: 23 kW – Power supply: 400 V, 50 Hz – Rotating knives: 35 x 35 mm – Number of knives: 40 pcs – Screen: Ø10 and 12 mm – HYDRAULIC DRAWER – Pressing drawer height: 320 mm – Outlet diameter: Ø200 mm – Dimensions (L/W/H): 240 / 150 / 175 cm – Weight: ~1600 kg

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg Ppodpfeyw Sqiex Amysw

Condition: like new (used), Year of construction: 2014, functionality: fully functional, shredder SG - 500/200 - the shredder is completely overhauled and ready for operation - the shredder is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Ppedpfxjwhw Ius Amyow - electrical switchboard for the machine

Condition: excellent (used), Catalogue number 7268 Podpfezmgkgex Amyjpw TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs Ppjdpszmfw Eofx Amyew - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg Ppedpfx Amezmfu Rjyjw ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Psdpfx Amozmymbeyopw

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm Ppodsza D T Topfx Amyjw - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)