AHENA

AHENA BOILER K.CAL /H 500.000

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: refrigerant R32 Chodpfxef H A Eys Albjb Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410-liter tank, winter package for ambient temperatures down to -25°C for outdoor installation, includes speed-controlled fans. Large Dixell display with protective cover.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Codpfoxtndnox Albjhb Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Csdpfx Aloyidvdobohb Further technical information and documentation available upon request.

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut Cjdpfev Hm T Sex Albshb - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Codpfxomiik To Albjhb Length: 4240mm Width: 1550mm Height: 1560mm

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Cedjfupadjpfx Albehb Like new Not a submersible pump or a deep-well pump.

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Csdpfx Alet Et Icsbshb Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Chjdpfx Alel Hx Rpjbjb

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: Codpfx Ajytpbiolbjhb • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Chsdpsw I E Dpjfx Albjb