Used Wire Rope for sale (3,454)

Condition: refurbished (used), DEMAG wire rope hoist / crane DH 316 H12 (completely overhauled) 2 units available. Hodpfx Agsxq Rx Aetent

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Hsdpfowzmi Iox Agtsnt Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Condition: ready for operation (used), Bridge Crane 5t, Demag Bridge Crane 5t, Crane 5t, Used Machine Manufacturer: Demag Overall dimensions: 10,700 x 3,000 mm Electrical data: 400 V; 50 Hz, total current = 18 Amps Hoisting unit: Demag P35 Load capacity: 5,000 kg / 5t Hnedpowd Hhcefx Agtst Rope length / lifting height: 8 m - Wired remote control - Crane travel motor refurbished - Trolley motor refurbished

Year of construction: 2001, condition: good (used), Indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Crane chassis: with electric drive -Chassis: Type STC 10 load capacity 1050 kg -Gear motor: Leroy Somer 0.25 kW -Travel speed: 22/5.5 m/min -Carrier width: up to 225 mm -Dimensions: see photos / technical drawing Hnedpfx Agjv R Uyhetjt -Dimensions: 555/230/H185 mm -Weight: 25.4 kg

Condition: excellent (used), 2 identical DEMAG hoists / electric wire rope hoists P625 H8 2/1, load capacity 5t, and P35 H8 2/1, load capacity 5t. Both equipped with fine lifting FG24 and 5t lower block. Both units underwent a complete general overhaul at the same time in 08/2003! Stored since then, without documentation, though the gear type plate contains the relevant information. Hodpfev T Twkex Agtjnt

Condition: good (used), Year of construction: 2008, Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm Hnsdowpff Repfx Agtet -Weight: 9.2 kg

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - V2A screws - 30mm aluminum side boards - Movable lashing eyes Net: €2,058.82 / Gross: €2,450.00 Article number: K41313251245.01 Technical data: Hnsdpfxszy Druj Agtot • Brand: Koch-Anhänger • Model: 4.13 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 250 x 125 x 45 cm • External dimensions (LxWxH): 383 x 179 x 96 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Unladen weight: 240 kg • Payload: 1,060 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/70R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Double-walled, anodized aluminum side boards, 30 mm, with integrated aluminum frame • Side board with load securing system; accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A) • Elaborate longitudinal supports (2 longitudinal beams) • Stable screen-printed floor, non-slip (birch plywood, water-resistant glued) • Very stable closures for the tailgate made of V2A stainless steel (unique) • Maintenance-free rubber spring axle, hot-dip galvanized • Wheel shock absorbers + 100km/h approval • ALKO overrun device and parking brake • Suspension and drawbar from reputable manufacturer ALKO • Reverse assist system • Brake cables standard with "Profi-Longlife" (plastic coating of the steel wire rope) • 2x chock with holder • Standard equipped with balanced 1A brand tires • Large 195/70R14 tires, balanced and capable of 100 km/h • Safety indicator on the coupling • Steel mudguards • Tailgate can be easily removed • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Screws completely M8 stainless steel (V2A) • Clear control panel with the most important data (tire pressure, cable layout, etc.) • Including 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale exceptions are reserved -

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 Hnodpfx Aol Tuvdogtet -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Schleuniger UniStrip 2100 – Automatic Wire Stripping Machine For sale is a Schleuniger UniStrip 2100 automatic wire stripping machine. The machine is in very good working condition and fully operational. All functions operate correctly, and the machine is ready for immediate use. Technical details: Manufacturer: Schleuniger AG Model: UniStrip 2100 / US 2100 Serial No.: 1770-2004 Power supply: 24 VDC Power consumption: 41 W Made in Switzerland CE certified Condition: Used Functionality: Fully functional The machine can be inspected and tested before purchase. Price: €1,000 Hodsz A D Thepfx Agtsnt Location: Hungary

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 700 mm Travel distance Y :450 mm Travel distance Z: 420 mm max. workpiece size X: 910 mm max. workpiece size Y: 660 mm max. workpiece size Z: 400 mm max. workpiece weight: 1200 kg table size X: 650 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +101 generator: 30 Ampere submerged cooling unit CNC wire EDM machine Hedsz Aq Dvspfx Agtjnt 5 CNC axes: X / Y / Z / U / V Automatic wire threading Dual Water Jet with Annealer Automatic wire break recovery 15" TFT touchscreen Linear glass scales in X / Y Dielectric chiller Automatic temperature control Max. table load: 1,200 kg Max. machining current: 30 A Programmable wire tension: 2–30 N Standard wire spool: 16 kg Machine weight: approx. 6,000 kg

Condition: good (used), Year of construction: 2019, 16 ton crane trolley, Kone, CXT, (chassis, rope, hook) – used - : Price ex-location: now only €5,000 instead of €12,500 (net), dismantled and loaded! Not included in the sale: bridge, remote control, coil hook. Manufacturer: Kone Year of manufacture: 2019 Reference no. 200967176/10 Order no. 4501376439 Hsdpfjy Iv D Uex Agtjnt Electric wire rope hoist Hoist type: CXT60410160SA5JDD0S Hoist serial number: 58704433 Load capacity: 16,000 kg Lifting height: 10.5 m Drum pulling force: - Rope length: - Classification: M5 Current consumption: 68.2 A Total output: 36.3 kW Hoisting motor Motor type: MF13XL200N260FA5132X-IP55 Serial number: 58202098 Power: 35 kW Gearbox type: GEN410NB000-D Lifting speed: 11.20/0.22 m/min Serial number: 58664786 Rope speed: - Inspections Operating voltage: 400 V, 50 Hz Control voltage: 48 V Serial number: - Control type: D2H overload SG Control cable - set load: 17,600 kg Circuit diagram: 200967176 Manufactured to IEC Travel drive Chassis motor type: MF06LA200-132F95001E-IP55 Serial numbers: 58531833, 58531836 Gearbox type: GES342PS3BO-A Serial numbers: 58657454, 58657451 Power: 0.65 kW Track gauge: 2,000 mm Overall height: approx. 65 cm Carriage type: M Wheel tread: 74 mm Flange width: - VFD serial no.: 37E43K2T18250130 Trolley travel speed: 32.0 m/min/- Original new price: approx. €20,000 Dismantling, including disconnection, will be professionally carried out by KONE. You will also receive the complete crane documentation and inspection book. Condition: good – very good Available: immediately Location: Niedernberg near Aschaffenburg Additional photos on request! Wiring diagram available as PDF, as well as operating manual, installation instructions, spare parts list, master data sheet, declaration of conformity, inspection book.

Condition: used, functionality: fully functional, machine/vehicle number: 001652U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,500 mm span x 6,300 kg capacity. Ref. 001652U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if desired, repainting * Power rail / conductor bar * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead crane. Hnsdpfx Ajzik Rcegtot Single-girder crane, single girder. Chain hoist, chain hoists.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, total length: 8,635 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2006 – Hoist type: wire rope hoist – FEM/ISO hoist class: 2m Dimensions – Span: 8,635 mm center-to-center – Overall length: 8,785 mm – Installation height: 900 mm – Width of wheel set including bumpers: 2,400 mm – Width of wheel set excluding bumpers: 2,200 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Speeds Hnsdpfxjzi Thwj Agtet – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel – Crane manual available: no, to be prepared – Electrical diagram available: yes – Condition: in good condition – Dismantled: yes, available immediately

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope Hnedpfeb A S Icox Agtjt -Wire rope: Ø 20 mm -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 75 kg

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 20 mm Hjdjb A S Ibjpfx Agtont -Length: approx. 50 m -for electric cable winch -other crane ropes are also available -Weight: 71 kg

Condition: used, functionality: fully functional, machine/vehicle number: 001663U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 16,500 mm span x 10,000 kg capacity. Suitable for outdoor use. Ref. 001663U * Technically 100% in order and inspected. All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Hodpjzilfusfx Agtjnt Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001658U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001658U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver fully assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if required, repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Jan Reiling B.V. also offers: * New lifting equipment * Spare parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Hedpfx Ajzilbpogtsnt Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001649U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001649U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes that we install are supplied with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and repainting if required * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the website of Jan Reiling B.V. Hnodpozik Nxofx Agtst Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: good (used), Year of construction: 2008, Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate Hodowpffkopfx Agtjnt -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Condition: used, functionality: fully functional, machine/vehicle number: 001661U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 6,300 kg capacity. Ref. 001661U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! We can supply our offered cranes, if desired, including: * Adjustments in length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Hnsdpjzildqefx Agtet Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001662U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 2 x 5,000 kg capacity. Ref. 001662U Hnjdpfezilfhsx Agtet * Stored indoors * Technically 100% functional and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, load capacity: 2,850 kg, For sale is a hall crane system by Konecranes (Trost & Hilterhaus). Hsdpfxeykbd De Agtjnt The system is in good condition and has been serviced regularly. TECHNICAL DETAILS - Load capacity: 2,850 kg - Model: Konecranes CXT 300 - Year of manufacture: 1998 - Span: approx. 11.2 m (as per system planning) - Crane runway: Suitable runway girders (profiles IPE 300 / IPE 200) included MACHINE DETAILS - Manufacturer: Trost & Hilterhaus GmbH / Konecranes - Project number: 15513/98 - Components: Complete bridge including end carriages and electric wire rope hoist - Electrical data: Control voltage 48 V EQUIPMENT - Radio remote control including charging station - Control cabinet (fully equipped with Schneider/Telemecanique components) - Documentation / structural analysis available - Paintwork: RAL 3000 (flame red) / bridge - No runway rails included; up to 50m can be offered additionally if required Transport and loading can be organized Europe-wide for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm Hnsdjy T Hfgspfx Agtot – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Condition: used, functionality: fully functional, machine/vehicle number: 001668U, load capacity: 1,000 kg, For sale Hnedpfx Aezilrnjgtjt Used Demag single-girder overhead crane, approximately 12,300 mm span x 1,000 kg capacity. Ref. 001668U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: used, A total of 6 ABUS double-girder overhead cranes are for sale, each with a lifting capacity of 16,000 kg and a span of 16,155 mm. The cranes were manufactured in 1990, 1999, and 2000 and are equipped with ABUS electric wire rope hoists of the GM 6160 series. Manufacturer: ABUS Crane type: Double-girder overhead crane Lifting capacity: 16,000 kg Span: 16,155 mm Hoisting mechanism: Electric wire rope hoist Hoist series: ABUS GM 6160 Hoist types: GM6160F6 and GM6160L06 Year of manufacture: 1990, 1999, and 2000 Crane manuals are available. Hodozvqdiepfx Agtjnt Location: Heilbronn Available quantity: 6 units The cranes underwent a complete service in 2026, and assistance will be provided during disassembly.